User Guide

About This Guide

This guide provides a brief introduction to Kasa Smart Wi-Fi Plug Slim and the Kasa Smart app, as well as regulatory information. Features available in Kasa may vary by model and software version. Kasa availability may also vary by region. All images, steps, and descriptions in this guide are only examples and may not reflect your actual Kasa experience.

Conventions

In this guide, the following convention is used:

More Info

• Specific product information can be found on the product page at https://www.tp-link.com/.
• A Technical Community is provided for you to discuss our products at https://community.tp-link.com/.
• Technical Support contact information can be found at the Help center of the Kasa Smart app and the Contact Technical Support page at https://www.tp-link.com/support/.

Introduction

Kasa Smart Wi-Fi Plug Slim is a compact home device that turns your typical electrical wall outlet into a controllable, customizable and multi-functional outlet, enabling you to easily control your lights and household electronic devices via Kasa Smart app on your iOS or Android devices, no matter where you find yourself.

• [Icon: Connected device] Control from Anywhere: Manage plugged-in electronics from anywhere with the Kasa Smart app.
• [Icon: Stacked plugs] Compact Design: Allows two plugs to be stacked in the same outlet.
• [Icon: Wi-Fi signal] No Hub Required: Connects to your home's Wi-Fi network. No need for a hub or extra equipment.
• [Icon: Home automation] Home Automation: Set multiple schedules, create scenes and groups, and simulate occupancy while away with away mode.
• [Icon: Energy meter] Energy Monitoring: Monitor connected devices' real-time energy consumption and identify which one is most power-hungry. Reduce unnecessary energy loss and lower your electric bills with the schedule and timer.

Appearance

The Smart Wi-Fi Plug Slim has a control button to turn on/off devices plugged in, and an LED to show the current status. The KP115 (US version) is used for demonstration in this guide.

Button Functions:

• Press to turn the socket ON or OFF.
• Press and hold (for 5 seconds) until the LED flashes amber and blue alternately to initiate the app configuring process (SoftAP).
• Press and hold (for 10 seconds) until the LED flashes amber rapidly to factory reset the Smart Plug Slim.

LED Status Indicators:

• Flashing amber and blue: Ready for setup.
• Flashing blue rapidly: Connecting to the network.
• Solid blue: Connected to the network.
• Flashing amber rapidly: Factory reset.
• Solid amber: Initializing, rebooting, or no network connection.
• Off: The Smart Plug Slim is switched OFF.

Set Up Your Smart Wi-Fi Plug Slim

Follow the steps below to set up your smart plug via the Kasa Smart app.

Step 1. Download Kasa Smart app

Go to Google Play or the App Store or scan the QR code to download and install the Kasa Smart app.

Step 2. Log In to Kasa Smart App

Open the app and use your TP-Link ID to log in. If you don't have a TP-Link ID, tap Create Account and the app will guide you through the rest.

Step 3. Add Your Devices

Tap the [+] button in the app and select Device to add your new Smart Plug. Follow app instructions to complete the setup.

Main Device Controls

After successfully setting up your smart plug, you will see the home page of the Kasa Smart app. Here you can view and manage all devices added to Kasa. Tap a smart plug to control and manage it.

Home Page

Displays a list of your connected smart devices.

Device Status

Provides access to controls such as Schedule, Timer, Away Mode, Energy usage, and Settings for the selected smart plug.

Configure Your Smart Wi-Fi Plug Slim

On the Device Status page, you can set schedules, timers, preset Away Mode, check usage, and change your smart plug's settings.

Set Schedule

Tap to set a schedule for your smart plug to simplify your daily routine by creating automatic On/Off actions.

Set Timer

Tap to set a timer, and your smart plug will automatically be turned on/off after the specified time ends.

Configure Your Smart Wi-Fi Plug Slim (Continued)

Preset Away Mode

Tap to preset the Away Mode, and your smart plug will be randomly turned on/off during this time. Note: The start and end time must be on the same day.

Check Usage

Tap to view and track energy consumption.

Device Settings

Tap to view and change the settings of your smart plug.

Create Scenes

A scene is a preset group of smart devices that can be programmed, customized, and activated simultaneously at the touch of a button from your smartphone or tablet, allowing you to easily set your mood, activity, or fit any special occasion. This page allows you to preset how your smart home devices should act automatically at a specific occasion.

1. Tap the [Scenes icon] at the bottom, then select a scene or create your own scene. For example, to turn on the light and turn off the light strip with one tap.
2. Select devices for the scene to work on and set their status respectively. This guide uses two plugs as an example.
3. Pick an icon for your scene.
4. Name your scene.
5. Tap Save. Your scene is then created successfully.
6. Your scene is displayed in the scene list. Just tap the scene to activate it.

Smart Actions

Smart Actions is a function that enables device interconnections and home automations. With Smart Actions, your Kasa devices can work together to create a smarter smart home. From the moment you wake up to the moment you drift asleep, Smart Actions make your home safer and more comfortable.

Note: At most three smart actions can be enabled at the same time.

1. Tap the [Smart Actions icon] at the bottom, then tap Add an Action.
2. Select an automation type for your Smart Actions.

Automation Types:

• Motion Sensing: Take actions when a Kasa camera senses motion.
• Control With a Switch: Extend Smart Switch control to other Kasa Smart devices. Turn on/off a group of devices with the Smart Switch all together.
• Schedule a Scene: Schedule a "Scene" to be turned on automatically at the time specified.
• Auto-Off Timer: Whenever a Smart device is turned on, turn it off after the designated amount of time.

Configure Motion Sensing

Example: Turn the light on when your Kasa camera senses a motion.

1. Tap Motion Sensing, then select a camera.
2. Select your Smart Plug.
3. Set the time for the actions. You can choose Always or tap Custom to choose a time according to your needs. Example: Trigger the light on from 8:00 PM to 7:00 AM every day.
4. (Optional) Set an auto-off timer, then tap Complete. Your light will be turned off after the set time if no motion is detected.
5. Name your action for easy identification.
6. The Smart Action is created successfully and displayed in the Smart Actions list.

Configure Control With a Switch

Example: Turn the light on when you turn on your switch, and turn the light off when you turn off the switch.

1. Tap Control With a Switch.
2. Add a Kasa smart switch. Then select your Smart Plug.
3. Name your action for easy identification.
4. Your Smart Action is created successfully and displayed in the Smart Actions list.

Configure Schedule a Scene

Example: Turn on a created scene automatically at a scheduled time.

1. Tap Schedule a Scene.
2. Select a scene you have created.
3. Set the time and frequency at which you want your scene to be turned on.
4. Name your action for easy identification.
5. Your Smart Action is created successfully and displayed in the Smart Actions list.

Configure Auto-Off Timer

Example: Turn off your light after 30 minutes when it is turned on.

1. Tap Auto-Off Timer, then select your Smart Plug.
2. Set the time.
3. Name your action for easy identification.
4. The Smart Action is created successfully and displayed in the Smart Actions list.

Voice & Third-Party Support

Use the Kasa Smart app to pair your smart Wi-Fi plug with Amazon Alexa or Google Home Assistant for a hands-free experience. Kasa also helps manage your smart home by working with Samsung SmartThings to trigger changes when you arrive home or leave for the day.

Launch the Kasa Smart app. Go to the sidebar and tap Works with Kasa. You can choose Amazon Alexa / Google Assistant / IFTTT / Samsung SmartThings for detailed instructions.

Set up Amazon Alexa

1. Tap Amazon Alexa.
2. Tap Connect.
3. Sign in with your Amazon account.
4. After sign-in, tap LINK.
5. Your TP-Link ID has been successfully linked with your Amazon account. You can now use Alexa voice commands to control your Smart Plug.

Set up Google Assistant

1. Tap Google Assistant.
2. Follow instructions to connect your device to your Google Home. Or find the FAQ at https://www.tp-link.com/en/support/faq/1534/.

Authentication

FCC Compliance Information Statement

Product Name: Kasa Smart Wi-Fi Plug Slim, Energy Monitoring

Model Number: KP115

Responsible party: TP-Link USA Corporation

Address: 10 Mauchly, Irvine, CA 92618

Website: http://www.tp-link.com/us/

Tel: +1 626 333 0234

Fax: +1 909 527 6804

E-mail: sales.usa@tp-link.com

This equipment has been tested and found to comply with the limits for a Class B digital device, pursuant to part 15 of the FCC Rules. These limits are designed to provide reasonable protection against harmful interference in a residential installation. This equipment generates, uses, and can radiate radio frequency energy and, if not installed and used in accordance with the instructions, may cause harmful interference to radio communications. However, there is no guarantee that interference will not occur in a particular installation. If this equipment does cause harmful interference to radio or television reception, which can be determined by turning the equipment off and on, the user is encouraged to try to correct the interference by one or more of the following measures:

• Reorient or relocate the receiving antenna.
• Increase the separation between the equipment and receiver.
• Connect the equipment into an outlet on a circuit different from that to which the receiver is connected.
• Consult the dealer or an experienced radio/ TV technician for help.

This device complies with part 15 of the FCC Rules. Operation is subject to the following two conditions:

1. This device may not cause harmful interference.
2. This device must accept any interference received, including interference that may cause undesired operation.

Any changes or modifications not expressly approved by the party responsible for compliance could void the user's authority to operate the equipment.

Note: The manufacturer is not responsible for any radio or TV interference caused by unauthorized modifications to this equipment. Such modifications could void the user's authority to operate the equipment.

FCC RF Radiation Exposure Statement

This equipment complies with FCC RF radiation exposure limits set forth for an uncontrolled environment. This device and its antenna must not be co-located or operating in conjunction with any other antenna or transmitter.

"To comply with FCC RF exposure compliance requirements, this grant is applicable to only Mobile Configurations. The antennas used for this transmitter must be installed to provide a separation distance of at least 20 cm from all persons and must not be co-located or operating in conjunction with any other antenna or transmitter."

TP-Link USA Corporation has determined that the equipment shown has been shown to comply with the applicable technical standards, FCC part 15. There is no unauthorized change made in the equipment and the equipment is properly maintained and operated.

Issue Date: 2022-01-05

CE Mark Warning

This is a class B product. In a domestic environment, this product may cause radio interference, in which case the user may be required to take adequate measures.

OPERATING FREQUENCY (the maximum transmitted power): 2412MHz--2472MHz (20dBm)

EU Declaration of Conformity

TP-Link hereby declares that the device is in compliance with the essential requirements and other relevant provisions of directives 2014/53/EU, 2009/125/EC, 2011/65/EU and (EU)2015/863.

The original EU Declaration of Conformity may be found at https://www.tp-link.com/en/support/ce/

RF Exposure Information

This device meets the EU requirements (2014/53/EU Article 3.1a) on the limitation of exposure of the general public to electromagnetic fields by way of health protection.

The device complies with RF specifications when used at 20 cm from your body. Restricted to indoor use.

UKCA Mark

UKCA Declaration of Conformity

TP-Link hereby declares that the device is in compliance with the essential requirements and other relevant provisions of the Radio Equipment Regulations 2017.

The original UK Declaration of Conformity may be found at https://www.tp-link.com/support/ukca

Canadian Compliance Statement

This device contains licence-exempt transmitter(s)/receiver(s) that comply with Innovation, Science and Economic Development Canada's licence-exempt RSS(s). Operation is subject to the following two conditions:

1. This device may not cause interference.
2. This device must accept any interference, including interference that may cause undesired operation of the device.

L'émetteur/récepteur exempt de licence contenu dans le présent appareil est conforme aux CNR d'Innovation, Sciences et Développement économique Canada applicables aux appareils radio exempts de licence. L'exploitation est autorisée aux deux conditions suivantes :

1. L'appareil ne doit pas produire de brouillage;
2. L'appareil doit accepter tout brouillage radioélectrique subi, même si le brouillage est susceptible d'en compromettre le fonctionnement.

Radiation Exposure Statement:

This equipment complies with IC radiation exposure limits set forth for an uncontrolled environment. This equipment should be installed and operated with minimum distance 20cm between the radiator & your body.

Déclaration d'exposition aux radiations:

Cet équipement est conforme aux limites d'exposition aux rayonnements IC établies pour un environnement non contrôlé. Cet équipement doit être installé et utilisé avec un minimum de 20 cm de distance entre la source de rayonnement et votre corps.

Industry Canada Statement

CAN ICES-3 (B)/NMB-3(B)

Korea Warning Statements

당해 무선설비는 운용중 전파혼신 가능성이 있음.

NCC Notice

注意!

取得審驗證明之低功率射頻器材,非經核准,公司、商號或使用者均不得擅自變更頻率、加大功率或變更原設計之特性及功能。低功率射頻器材之使用不得影響飛航安全及干擾合法通信;經發現有干擾現象時,應立即停用,並改善至無干擾時方得繼續使用。

BSMI Notice

Safety Consultations and Precautions

• Please use this product according to the specified power type.
• Please cut off the power before cleaning the product. Do not use liquid, spray cleaner, or a damp cloth for cleaning.
• Beware of moisture; do not spill water or other liquids onto the product.
• Slots and openings are for ventilation to ensure reliable operation and prevent overheating; do not block or cover the openings.
• Do not place the product near heat sources. Unless there is normal ventilation, do not place it in a confined space.
• Do not disassemble or repair the product yourself. If the product is faulty, please contact the manufacturer or agent.

Restricted Substances Statement

Note 1: "Exceeding 0.1 wt %" and "exceeding 0.01 wt %" indicate that the percentage content of the restricted substance exceeds the reference percentage value of presence condition.

Note 2: "○" indicates that the percentage content of the restricted substance does not exceed the percentage of reference value of presence.

Note 3: The "-" indicates that the restricted substance corresponds to the exemption.

Product certified in accordance with the system of Ukraine CEPRO for compliance with the requirements of regulatory documents and requirements stipulated by current legislative acts of Ukraine.

Safety Information

• The automatic operation feature is Type 1.B action according to UL 60730-1.
• The product is Pollution Degree 2, which is intended to be used in a household environment or similar.
• Keep the device away from water, fire, humidity or hot environments.
• Do not attempt to disassemble, repair, or modify the device.
• Do not use the device where wireless devices are not allowed.
• The socket-outlet shall be installed near the equipment and shall be easily accessible.
• For passthrough devices, plug the power strips into the integrated electrical sockets of the devices, but devices of the same or another type not be stacked in normal use.
• Do not plug devices in series.

CAUTION: Electronic switch integrated in this product is only intended for functional purposes. Unplug the appliance before servicing.

Supported Load Type

For US Version:

• 100-120V~, 50/60Hz, 15A General/Resistive Load;
• 100-120V~, 50/60Hz, 1/6 HP Motor Load
• 100-120V~, 50/60Hz, Heater: ≤1500 W
• 100-120V~, 50/60Hz, Iron: ≤1500 W
• 100-120V~, 50/60Hz, Toaster: ≤850 W
• 100-120V~, 50/60Hz, Humidifier: ≤260 W
• 100-120V~, 50/60Hz, Tower Fan: ≤50 W
• Construction of Switch: Micro-Disconnection(μ)

For EU Version:

• 100-240V~, 50/60Hz, 16A max, Resistive Load;
• 100-240V~, 50/60Hz, 2.5FLA/16LRA*, Motor Load
• Construction of Switch: Micro-Disconnection(μ)

For UK Version:

• 100-240V~, 50/60Hz, 13A max, Resistive Load;
• 100-240V~, 50/60Hz, 2.0FLA/13LRA*, Motor Load
• Construction of Switch: Micro-gap Switch(μ)

For AU Version:

• 220-240V~, 50/60Hz, 10A max, Resistive Load;
• 220-240V~, 50/60Hz, 1.6FLA/10LRA*, Motor Load
• Construction of Switch: Micro-gap Switch(μ)

*FLA = Full Load Ampere; LRA = Lock Rotor Ampere

Operating Temperature: 0 °C~ 40 °C (32°F ~ 104°F)

Storage Temperature: -40 °C~ 60 °C (-40°F ~ 140°F)

Operating Humidity: 10%~90%RH, Non-condensing

Please read and follow the above safety information when operating the device. TP-Link cannot guarantee that no accidents or damage will occur due to improper use of the device. Please use this product with care and operate at your own risk.

ERP Information

Technical Information

• The trigger that is used to reactivate the equipment: WiFi signal
• The (maximum) performance specifications: WiFi: 17dBm
• The communication protocol used by the equipment: WiFi: 802.11b/g/n

Power Consumption

Power Management

The default period of time after which the power management function, or a similar function, switches the equipment automatically into a condition providing networked standby: <1 minutes

Possibility of deactivating wireless network connection(s)

How to activate and deactivate wireless network ports: KP115 relies on a single wireless network connection for intended use and has no wired network connection. This requirement does not apply.

Explanation of the symbols on the product label

• [Symbol: AC voltage waveform] AC voltage
• [Symbol: House] Indoor use only
• [Symbol: Micro-gap switch] Switch of micro-gap / micro-disconnection construction

RECYCLING

This product bears the selective sorting symbol for Waste electrical and electronic equipment (WEEE). This means that this product must be handled pursuant to European directive 2012/19/EU in order to be recycled or dismantled to minimize its impact on the environment. User has the choice to give his product to a competent recycling organization or to the retailer when he buys a new electrical or electronic equipment.