Kasa Smart Wi-Fi Plug Mini EP10 User Guide

About This Guide

This guide provides a brief introduction to Kasa Smart Wi-Fi Plug Mini and the Kasa Smart app, as well as regulatory information. Please note that features of Kasa Smart Wi-Fi Plug Mini may vary slightly depending on the model and software version you have, and on your location, language and internet service provider. All images, steps, and descriptions in this guide are only examples and may not reflect your actual experience.

Conventions

More Info

• Operating temperature, storage temperature, and other specifications can be found on the product page at https://www.tp-link.com.
• Our Technical Support and troubleshooting information can be found at https://www.tp-link.com/support/.
• A TP-Link Community is provided for you to discuss our products at https://community.tp-link.com.

Introduction

Kasa Smart Wi-Fi Plug Mini is a compact home device that turns your typical electrical wall outlet into a controllable, customizable and multi-functional outlet, enabling you to easily control your lights and household electronic devices via Kasa Smart app on your iOS or Android devices, no matter where you find yourself.

Key Features:

• Control from Anywhere: Manages plugged-in electronics from anywhere with the Kasa Smart app. [Wi-Fi Icon]
• Compact Design: Allows two plugs to be stacked in the same outlet. [Two Plugs Icon]
• No Hub Required: Connects to your home's Wi-Fi network. No need for a hub or extra equipment. [Router Icon]
• Home Automation: Set multiple schedules, create scenes and groups, and simulate occupancy while away with away mode. [House with Gears Icon]
• Schedule and Timer: Preset a schedule to automatically manage devices and create countdown timer lists for connected electronics. [Calendar and Clock Icon]
• Away Mode: Automatically turns devices on and off at different times to give the appearance that someone is home. [Airplane Icon]

Supported Load Types:

• Heater: ≤1500 W
• Humidifier: ≤260 W
• Iron: ≤1500 W
• Toaster: ≤850 W
• Tower Fan: ≤50 W

Appearance

The Smart Wi-Fi Plug Mini has a control button to turn on/off devices plugged in, making it very easy to use. The EP10 (US version) is used for demonstration in this guide.

The button on the side can be pressed to turn the socket ON or OFF.

Set Up Your Smart Wi-Fi Plug Mini

Follow the steps below to set up your smart plug via the Kasa Smart app.

1. Install Kasa Smart app: Get the Kasa Smart app from Google Play or the Apple App Store, or scan the QR code [QR Code Icon] to download it.
2. Log in or sign up with TP-Link ID: Open the Kasa Smart app and log in with your TP-Link ID. If you don't have an account, create one first.
3. Add Device: Tap the [+] button in the Kasa Smart app, select Device > Smart Plugs > Smart Plug Mini, and then follow the step-by-step app instructions to complete the setup.

Simple to Set up and Use with Alexa

Setup is faster than ever before with Alexa. Use your Echo device to set up the plug via voice command.

1. Once you've set up your Echo device, plug in your TP-Link smart plug. If Alexa or the Alexa app says "New plug found," go straight to step 3. [Lightning Bolt Icon]
2. In the Kasa app, click the [+] icon and then follow the step-by-step instructions to set up your smart plug and link your TP-Link account to Amazon. [Wi-Fi Icon]
3. To use your device with Alexa, just say "Alexa, turn on First Plug." [Camera Icon]

Main Device Controls

After successfully setting up your smart plug, you will see the home page of the Kasa Smart app. Here you can view and manage all devices added to Kasa. Tap a smart plug to control and manage it.

Home Page

The Home Page displays your devices, including "Plug 1", "Plug 2", "Plug 3", each marked as "Local Only". A green circle icon [Green Circle Icon] indicates the device is active.

Device Status

The Device Status screen for "Plug 1" shows controls for Schedule [Calendar Icon], Timer [Clock Icon], Away mode [Sun Icon], and Runtime [Usage Icon].

Configure Your Smart Wi-Fi Plug Mini

On the Device Status page, you can set schedules, preset Away Mode, set timers, check usage, and change the settings of your smart plug.

Set Schedule

Tap the Schedule icon [Schedule] to set a schedule for your smart plug to simplify your daily routine by creating automatic On/Off actions.

Preset Away Mode

Tap the Away Mode icon [Away Mode] to preset the Away Mode. Your smart plug will be randomly turned on/off during this time to simulate occupancy.

Set Timer

Tap the Timer icon [Timer] to set a timer. Your smart plug will automatically be turned on/off after the time ends.

Check Usage

Tap the Runtime icon [Runtime] to view and track energy consumption. The display shows Current Runtime, Total Runtime (Today), Daily Average, and Total Runtime for Past 7 Days and Past 30 Days.

Device Settings

Tap the Settings icon [Settings] to view and change the settings of your smart plug. Options include Name and Icon (e.g., Plug 1, Plug 2, Plug 3), Customize (Re-Order), Status LED, and Advanced (Device Info).

Create Scenes

A scene is a preset group of smart devices that can be programmed, customized, and activated simultaneously at the touch of a button from your smartphone or tablet. This allows you to easily set your mood, activity, or fit any special occasion. This page allows you to preset how your smart home devices should act automatically at special occasions.

Scenes let you set the mood of your home in one tap:

• Good Morning: Get ready for the day by turning on your devices. [Lightbulb Icon]
• Good Night: Turn everything off before bedtime. [Moon Icon]
• Movie Night: Dim the lights for showtime. [Popcorn Icon]
• Custom: Create your own scene. [Gear Icon]

Discover Kasa

Use the Kasa Smart app to pair your smart Wi-Fi plug with Amazon Alexa, Google Home Assistant, and enjoy a full hands-free experience. Kasa also helps manage the rest of your smart home, working with Samsung SmartThings to trigger changes when you arrive home or leave for the day.

Launch the Kasa Smart app and go to Add Device > WORKS WITH KASA > Amazon Alexa / Google Assistant / Samsung SmartThings for detailed instructions.

FCC Compliance Information Statement

[FCC Logo]

Product Name: Kasa Smart Wi-Fi Plug Mini

Model Number: EP10

Responsible party: TP-Link USA Corporation, d/b/a TP-Link North America, Inc.

Address: 145 South State College Blvd. Suite 400, Brea, CA 92821

Website: http://www.tp-link.com/us/

Tel: +1 626 333 0234

Fax: +1 909 527 6803

E-mail: sales.usa@tp-link.com

This equipment has been tested and found to comply with the limits for a Class B digital device, pursuant to part 15 of the FCC Rules. These limits are designed to provide reasonable protection against harmful interference in a residential installation. This equipment generates, uses and can radiate radio frequency energy and, if not installed and used in accordance with the instructions, may cause harmful interference to radio communications. However, there is no guarantee that interference will not occur in a particular installation. If this equipment does cause harmful interference to radio or television reception, which can be determined by turning the equipment off and on, the user is encouraged to try to correct the interference by one or more of the following measures:

• Reorient or relocate the receiving antenna.
• Increase the separation between the equipment and receiver.
• Connect the equipment into an outlet on a circuit different from that to which the receiver is connected.
• Consult the dealer or an experienced radio/ TV technician for help.

This device complies with part 15 of the FCC Rules. Operation is subject to the following two conditions:

1. This device may not cause harmful interference.
2. This device must accept any interference received, including interference that may cause undesired operation.

FCC RF Radiation Exposure Statement

Any changes or modifications not expressly approved by the party responsible for compliance could void the user's authority to operate the equipment.

Note: The manufacturer is not responsible for any radio or TV interference caused by unauthorized modifications to this equipment. Such modifications could void the user's authority to operate the equipment.

This equipment complies with FCC RF radiation exposure limits set forth for an uncontrolled environment. This device and its antenna must not be co-located or operating in conjunction with any other antenna or transmitter.

"To comply with FCC RF exposure compliance requirements, this grant is applicable to only Mobile Configurations. The antennas used for this transmitter must be installed to provide a separation distance of at least 20 cm from all persons and must not be co-located or operating in conjunction with any other antenna or transmitter."

TP-Link USA Corporation has determined that the equipment shown as above has been shown to comply with the applicable technical standards, FCC part 15. There is no unauthorized change made in the equipment and the equipment is properly maintained and operated.

Issue Date: 2020-10-14

Canadian Compliance Statement

This device contains licence-exempt transmitter(s)/receiver(s) that comply with Innovation, Science and Economic Development Canada's licence-exempt RSS(s). Operation is subject to the following two conditions:

1. This device may not cause interference.
2. This device must accept any interference, including interference that may cause undesired operation of the device.

L'émetteur/récepteur exempt de licence contenu dans le présent appareil est conforme aux CNR d'Innovation, Sciences et Développement économique Canada applicables aux appareils radio exempts de licence. L'exploitation est autorisée aux deux conditions suivantes : 1) L'appareil ne doit pas produire de brouillage; 2) L'appareil doit accepter tout brouillage radioélectrique subi, même si le brouillage est susceptible d'en compromettre le fonctionnement.

Radiation Exposure Statement:

This equipment complies with IC radiation exposure limits set forth for an uncontrolled environment. This equipment should be installed and operated with minimum distance 20cm between the radiator & your body.

Déclaration d'exposition aux radiations:

Cet équipement est conforme aux limites d'exposition aux rayonnements IC établies pour un environnement non contrôlé. Cet équipement doit être installé et utilisé avec un minimum de 20 cm de distance entre la source de rayonnement et votre corps.

Industry Canada Statement

CAN ICES-3 (B)/NMB-3(B)

Korea Warning Statements

당해 무선설비는 운용중 전파혼신 가능성이 있음. (This wireless equipment may cause radio interference during operation.)

NCC Notice

注意! 依據 低功率電波輻射性電機管理辦法 LP0002低功率射頻器材技術規範_章節3.8.2

取得審驗證明之低功率射頻器材,非經核准,公司、商號或使用者均不得擅自變更頻率、加大功率或變更原設計之特性及功能。

低功率射頻器材之使用不得影響飛航安全及干擾合法通信;經發現有干擾現象時,應立即停用,並改善至無干擾時方得繼續使用。

前述合法通信,指依電信管理法規定作業之無線電通信。

低功率射頻器材須忍受合法通信或工業、科學及醫療用電波輻射性電機設備之干擾。

BSMI Notice

安全諮詢及注意事項:

• 請按照本產品注明的電源類型使用本產品。
• 清潔本產品之前請先切斷電源。請勿使用液體、噴霧清潔劑或濕布進行清潔。
• 注意防潮,請勿將水或其他液體潑灑到本產品上。
• 插槽與開口供通風使用,以確保本產品的操作可靠並防止過熱,請勿堵塞或覆蓋開口。
• 請勿將本產品置放於靠近熱源的地方。除非有正常的通風,否則不可放在密閉位置中。
• 不要私自拆開機殼或自行維修,如產品有故障請與原廠或代理商聯繫。

Statement of Restricted Substances

Equipment name: Kasa Smart Wi-Fi Plug Mini

Type designation (Type): EP10

Restricted substances and its chemical symbols

Note 1: "Exceeding 0.1 wt %" and "exceeding 0.01 wt %” indicate that the percentage content of the restricted substance exceeds the reference percentage value of presence condition.

Note 2: "○" indicates that the percentage content of the restricted substance does not exceed the percentage of reference value of presence.

Note 3: The “-” indicates that the restricted substance corresponds to the exemption.

Safety Information

• The automatic operation feature is Type 1.B action according to UL 60730-1.
• The product is Pollution Degree 2, which is intended to be used in a household environment or similar.
• Keep the device away from water, fire, humidity or hot environments.
• Do not attempt to disassemble, repair, or modify the device.
• Do not use the device where wireless devices are not allowed.
• The socket-outlet shall be installed near the equipment and shall be easily accessible.

Additional Safety Information

For passthrough devices, plug the power strips into the integrated electrical sockets of the devices, but devices of the same or another type not be stacked in normal use.

Please read and follow the above safety information when operating the device. TP-Link cannot guarantee that no accidents or damage will occur due to improper use of the device. Please use this product with care and operate at your own risk.

Operating Temperature: 0 °C~ 40 °C (32°F ~ 104°F)

Storage Temperature: -40 °C~ 70 °C (-40°F ~ 158°F)

Operating Humidity: 10%~90%RH, Non-condensing

Explanation of the symbols on the product label

• Symbol for AC voltage: Wave symbol (~).
• Indoor use only: House symbol.
• Switch of micro-gap / micro-disconnection construction: Symbol 'μ'.
• RECYCLING: This product bears the selective sorting symbol for Waste electrical and electronic equipment (WEEE). This means that this product must be handled pursuant to European directive 2012/19/EU in order to be recycled or dismantled to minimize its impact on the environment. User has the choice to give his product to a competent recycling organization or to the retailer when he buys a new electrical or electronic equipment.