Kasa Smart Wi-Fi Plug Mini

About This Guide

This guide provides a brief introduction to the Kasa Smart Wi-Fi Plug Mini and the Kasa Smart app, as well as regulatory information. Features may vary slightly based on model, software version, location, language, and internet service provider. Images, steps, and descriptions are examples and may not reflect your actual experience.

Conventions

• Teal Text: Key information, including management page text (menus, items, buttons).
• Underlined Teal Text: Hyperlinks. Click to redirect to a website.

More Info

• Specifications (operating/storage temperature): www.tp-link.com
• Technical Support & Troubleshooting: www.tp-link.com/support/
• Community Forum: community.tp-link.com

Introduction

The Kasa Smart Wi-Fi Plug Mini is a compact home device that transforms a standard electrical wall outlet into a controllable, customizable, and multi-functional outlet. It allows users to easily control lights and household electronic devices via the Kasa Smart app on iOS or Android devices, from anywhere.

Key Features:

• Control from Anywhere: Manages plugged-in electronics remotely using the Kasa Smart app.
• Compact Design: Allows two plugs to be stacked in a single wall outlet.
• No Hub Required: Connects directly to your home's Wi-Fi network without needing a hub or extra equipment.
• Home Automation: Enables setting multiple schedules, creating scenes and groups, and simulating occupancy with 'Away Mode'.

Supported Load Types:

• Heater: ≤1500 W
• Humidifier: ≤260 W
• Iron: ≤1500 W
• Toaster: ≤850 W
• Tower Fan: ≤50 W

Appearance

The Smart Wi-Fi Plug Mini features a control button to turn connected devices ON/OFF and an LED indicator to show the current status. The HS103 (US version) is used for demonstration in this guide.

Control Button Actions:

• Press: Turns the socket ON or OFF.
• Press and hold (5 seconds): Initiates the app configuring process (SoftAP) until the LED flashes amber and blue alternately.
• Press and hold (10 seconds): Factory resets the Smart Plug Mini until the LED flashes amber rapidly.

LED Status Indicators:

• Flashing amber and blue: App configuring process (SoftAP) initiated.
• Flashing blue rapidly: Connecting to the network.
• Solid blue: Connected to the network.
• Flashing amber rapidly: Factory reset.
• Solid amber: Initializing, rebooting, or no network connection.
• Off: The Smart Plug Mini is switched OFF.

Set Up Your Smart Wi-Fi Plug Mini

Follow these steps to set up your smart plug using the Kasa Smart app:

1. Install Kasa Smart app: Get the Kasa Smart app from Google Play or the Apple App Store, or scan the [QR Code for App Download] to download it.
2. Log in or sign up with TP-Link ID: Open the Kasa Smart app and log in with your TP-Link ID. Create an account if you don't have one.
3. Add Device: Tap the [Add Icon] button in the Kasa Smart app, select Add a Device > Smart Plugs > Smart Plug Lite / Mini, and follow the step-by-step app instructions to complete the setup.

Main Device Controls

After successfully setting up your smart plug, the Kasa Smart app's home page will display it. You can view and manage all added devices here. Tap a smart plug to control and manage it.

The app interface includes a Home Page showing your devices and a Device Status page for individual device controls.

Configure Your Smart Wi-Fi Plug Mini

Set Schedule

You can set schedules for your smart plug to turn on/off automatically, simplifying your daily routine.

1. Tap the [Schedule Icon] on the Device Status Page.
2. Tap the [+] icon and select the time and frequency for your smart plug to turn on or off automatically.
3. You can also choose to turn your plug on or off at [Sunrise Icon] or [Sunset Icon], based on your location.

Set Away Mode

Set Away Mode for your smart plug to turn on/off automatically at random intervals while you are away, creating the appearance that someone is home.

1. Tap the [Away Icon] on the Device Status page.
2. Set the time period during which your smart plug will turn on/off automatically and select the repeating frequency.

Set Timer

Set a countdown timer, and your smart plug will automatically turn on/off after the time ends.

1. Tap the [Timer Icon] on the Device Status page.
2. Set the time period after which your smart plug will turn on or off automatically.

Check Usage

You can view and track the energy consumption of your smart plug.

1. Tap the [Runtime Icon] on the Device Status page.
2. Check the runtime of your smart plug, including current, total, and average usage over different periods (Today, Past 7 Days, Past 30 Days).

Change Device Settings

You can change the device name and check device information in Device Settings.

1. Tap the [Settings Icon] on the Device Status page.
2. You can view Device Info and change the name of your smart plug. You can also remove the device from this section.

Create Scenes

A scene is a preset group of smart devices that can be programmed, customized, and activated simultaneously with a single tap from your smartphone or tablet. This allows you to easily set your mood, activity, or fit any special occasion. This page helps you preset how your smart home devices should act automatically at special occasions.

Scene Examples:

• Good Morning: Get ready for the day by turning on your devices.
• Good Night: Turn everything off before bedtime.
• Movie Night: Dim the lights for showtime.
• Custom: Create your own scene.

Discover Kasa

Use the Kasa Smart app to pair your smart Wi-Fi plug with Amazon Alexa, Google Home Assistant, and enjoy a hands-free experience. Kasa also helps manage other smart home devices, working with Samsung SmartThings to trigger changes when you arrive home or leave for the day.

Launch the Kasa Smart app and navigate to Add Device > WORKS WITH KASA > Amazon Alexa / Google Assistant / Samsung SmartThings for detailed instructions.

FCC Compliance Information Statement

Product Name: Kasa Smart Wi-Fi Plug Mini

Model Number: HS103

Responsible Party: TP-Link USA Corporation, d/b/a TP-Link North America, Inc.

Address: 145 South State College Blvd. Suite 400, Brea, CA 92821

Website: http://www.tp-link.com/us/

Tel: +1 626 333 0234

Fax: +1 909 527 6803

E-mail: sales.usa@tp-link.com

This equipment has been tested and found to comply with the limits for a Class B digital device, pursuant to part 15 of the FCC Rules. These limits are designed to provide reasonable protection against harmful interference in a residential installation. This equipment generates, uses, and can radiate radio frequency energy and, if not installed and used in accordance with the instructions, may cause harmful interference to radio communications. However, there is no guarantee that interference will not occur in a particular installation. If this equipment causes harmful interference to radio or television reception, which can be determined by turning the equipment off and on, the user is encouraged to try to correct the interference by one or more of the following measures:

• Reorient or relocate the receiving antenna.
• Increase the separation between the equipment and receiver.
• Connect the equipment into an outlet on a circuit different from that to which the receiver is connected.
• Consult the dealer or an experienced radio/TV technician for help.

This device complies with part 15 of the FCC Rules. Operation is subject to the following two conditions:

1. This device may not cause harmful interference.
2. This device must accept any interference received, including interference that may cause undesired operation.

Any changes or modifications not expressly approved by the party responsible for compliance could void the user's authority to operate the equipment. Note: The manufacturer is not responsible for any radio or TV interference caused by unauthorized modifications to this equipment. Such modifications could void the user's authority to operate the equipment.

FCC RF Radiation Exposure Statement

This equipment complies with FCC RF radiation exposure limits set forth for an uncontrolled environment. This device and its antenna must not be co-located or operating in conjunction with any other antenna or transmitter. "To comply with FCC RF exposure compliance requirements, this grant is applicable to only Mobile Configurations. The antennas used for this transmitter must be installed to provide a separation distance of at least 20 cm from all persons and must not be co-located or operating in conjunction with any other antenna or transmitter." TP-Link USA Corporation has determined that the equipment shown complies with applicable technical standards, FCC part 15. There is no unauthorized change made in the equipment, and it is properly maintained and operated.

Issue Date: 2020-11-13

Canadian Compliance Statement

This device contains licence-exempt transmitter(s)/receiver(s) that comply with Innovation, Science and Economic Development Canada's licence-exempt RSS(s). Operation is subject to the following two conditions: (1) This device may not cause interference. (2) This device must accept any interference, including interference that may cause undesired operation of the device.

L'émetteur/récepteur exempt de licence contenu dans le présent appareil est conforme aux CNR d'Innovation, Sciences et Développement économique Canada applicables aux appareils radio exempts de licence. L'exploitation est autorisée aux deux conditions suivantes : 1) L'appareil ne doit pas produire de brouillage; 2) L'appareil doit accepter tout brouillage radioélectrique subi, même si le brouillage est susceptible d'en compromettre le fonctionnement.

Radiation Exposure Statement:

This equipment complies with IC radiation exposure limits set forth for an uncontrolled environment. This equipment should be installed and operated with minimum distance 20cm between the radiator & your body.

Déclaration d'exposition aux radiations:

Cet équipement est conforme aux limites d'exposition aux rayonnements IC établies pour un environnement non contrôlé. Cet équipement doit être installé et utilisé avec un minimum de 20 cm de distance entre la source de rayonnement et votre corps.

Industry Canada Statement

CAN ICES-3 (B)/NMB-3(B)

Korea Warning Statements

당해 무선설비는 운용중 전파혼신 가능성이 있음.

NCC Notice

注意!

依據 低功率電波輻射性電機管理辦法 LP0002低功率射頻器材技術規範_章節3.8.2

取得審驗證明之低功率射頻器材,非經核准,公司、商號或使用者均不得擅自變更頻率、加大功率或變更原設計之特性及功能。

低功率射頻器材之使用不得影響飛航安全及干擾合法通信;經發現有干擾現象時,應立即停用,並改善至無干擾時方得繼續使用。

前述合法通信,指依電信管理法規定作業之無線電通信。

低功率射頻器材須忍受合法通信或工業、科學及醫療用電波輻射性電機設備之干擾。

BSMI Notice

安全諮詢及注意事項

• 請按照本產品注明的電源類型使用本產品。
• 清潔本產品之前請先切斷電源。請勿使用液體、噴霧清潔劑或濕布進行清潔。
• 注意防潮,請勿將水或其他液體潑灑到本產品上。
• 插槽與開口供通風使用,以確保本產品的操作可靠並防止過熱,請勿堵塞或覆蓋開口。
• 請勿將本產品置放於靠近熱源的地方。除非有正常的通風,否則不可放在密閉位置中。
• 不要私自拆開機殼或自行維修,如產品有故障請與原廠或代理商聯繫。

Restricted Substances Information

Note 1: "Exceeding 0.1 wt %" and "exceeding 0.01 wt %" indicate that the percentage content of the restricted substance exceeds the reference percentage value of presence condition.

Note 2: "○" indicates that the percentage content of the restricted substance does not exceed the percentage of reference value of presence.

Note 3: The "-" indicates that the restricted substance corresponds to the exemption.

Safety Information

• The automatic operation feature is Type 1.B action according to UL 60730-1.
• The product is Pollution Degree 2, intended for use in a household environment or similar.
• Keep the device away from water, fire, humidity, or hot environments.
• Do not attempt to disassemble, repair, or modify the device.
• Do not use the device where wireless devices are not allowed.
• The socket-outlet shall be installed near the equipment and shall be easily accessible.
• For passthrough devices, plug power strips into the integrated electrical sockets of the devices, but devices of the same or another type should not be stacked in normal use.
• Please read and follow the above safety information when operating the device. TP-Link cannot guarantee that no accidents or damage will occur due to improper use. Use this product with care and at your own risk.

Operating Conditions:

• Operating Temperature: 0 °C~ 40 °C (32°F ~ 104°F)
• Storage Temperature: -40 °C~ 70 °C (-40°F ~ 158°F)
• Operating Humidity: 10%~90%RH, Non-condensing

Explanation of the symbols on the product label:

• [AC Voltage Symbol]: AC voltage
• [Indoor Use Symbol]: Indoor use only
• [Micro-gap Symbol]: Switch of micro-gap / micro-disconnection construction
• [WEEE Recycling Symbol]: This product bears the selective sorting symbol for Waste electrical and electronic equipment (WEEE). It must be handled pursuant to European directive 2012/19/EU for recycling or dismantling to minimize environmental impact. Users can give their product to a competent recycling organization or the retailer when buying new electrical or electronic equipment.