TP-Link Kasa Smart Wi-Fi Plug Slim, Energy Monitoring KP115

About This Guide

This guide provides a brief introduction to the Kasa Smart Wi-Fi Plug Slim and the Kasa Smart app, as well as regulatory information. Features may vary slightly depending on the model, software version, location, language, and internet service provider. All images, steps, and descriptions are examples and may not reflect your actual experience.

Conventions

In this guide, the following convention is used:

More Info

• Operating temperature, storage temperature, and other specifications can be found on the product page at https://www.tp-link.com.
• Technical Support and troubleshooting information can be found at https://www.tp-link.com/support/.
• The TP-Link Community is provided for you to discuss our products at https://community.tp-link.com.

Introduction

The Kasa Smart Wi-Fi Plug Slim is a compact home device that turns your typical electrical wall outlet into a controllable, customizable, and multi-functional outlet. It enables you to easily control your lights and household electronic devices via the Kasa Smart app on your iOS or Android devices, no matter where you find yourself.

• ?Control from Anywhere: Manages plugged-in electronics from anywhere with the Kasa Smart app.
• ?Compact Design: Allows two plugs to be stacked in the same outlet.
• ?No Hub Required: Connects to your home's Wi-Fi network. No need for a hub or extra equipment.
• ?Home Automation: Set multiple schedules, create scenes and groups, and simulate occupancy while away with Away Mode.

Supported Load Types:

• Heater: ≤1500 W
• Humidifier: ≤260 W
• Iron: ≤1500 W
• Toaster: ≤850 W
• Tower Fan: ≤50 W

Appearance

The Smart Wi-Fi Plug Slim has a control button to turn on/off devices plugged in, and an LED to show the current status. The KP115 (US version) is used for demonstration in this guide.

Control Button:

• Press to turn the socket ON or OFF.
• Press and hold (for 5 seconds) until the LED flashes amber and blue alternately to initiate the app configuring process (SoftAP).
• Press and hold (for 10 seconds) until the LED flashes amber rapidly to factory reset the Smart Plug Mini.

LED Status:

• Flashing amber and blue: App configuring process (SoftAP) initiated.
• Flashing blue rapidly: Connecting to the network.
• Solid blue: Connected to the network.
• Flashing amber rapidly: Factory reset.
• Solid amber: Initializing, rebooting, or no network connection.
• Off: The Smart Plug Mini is switched OFF.

Set Up Your Smart Wi-Fi Plug Slim

Follow the steps below to set up your smart plug via the Kasa Smart app.

1. Install Kasa Smart app

Get the Kasa Smart app from Google Play or the Apple App Store, or scan the QR code below to download it.

[QR Code for App Download]

2. Log in or sign up with TP-Link ID

Open the Kasa Smart app and log in with your TP-Link ID. If you don't have an account, create one first.

[Image: Welcome Home to Kasa screen with Create Account and Log In buttons]

3. Add Device

Tap the [+] button in the Kasa Smart app, select Add a Device > Smart Plugs > Smart Plug Lite / Mini, and then follow step-by-step app instructions to complete the setup.

[Image: Add Device screen showing options like Amazon Alexa, Google Assistant, Cameras, Smart Plugs, Smart Lights, Smart Switches]

Main Device Controls

After successfully setting up your smart plug, you will see the home page of the Kasa Smart app. Here you can view and manage all devices added to Kasa. Tap a smart plug to control and manage it.

Home Page

[Image: Kasa app home page showing a list of smart plugs with ON/OFF toggles]

Device Status

[Image: Kasa app device status screen for a smart plug, showing controls for Schedule, Timer, Away, and Runtime]

Configure Your Smart Wi-Fi Plug Slim

On the Device Status page, you can set schedules, preset Away Mode, set timers, check usage, and change the settings of your smart plug.

Set Schedule

Tap the [Schedule] icon to set a schedule for your smart plug to simplify your daily routine by creating automatic On/Off actions.

[Image: Kasa app schedule creation screen with time and day selection]

Preset Away Mode

Tap the [Away] icon to preset the Away Mode. Your smart plug will be randomly turned on/off during this time.

[Image: Kasa app Away Mode configuration screen with start and end time selection]

Set Timer

Tap the [Timer] icon to set the timer. Your smart plug will automatically be turned on/off after the time ends.

[Image: Kasa app timer configuration screen with duration selection]

Check Usage

Tap the [Runtime] icon to view and track energy consumption.

[Image: Kasa app runtime/usage screen showing current, daily, and past usage data]

Device Settings

Tap the [Settings] icon to view and change the settings of your smart plug.

[Image: Kasa app device settings screen showing options like Name and Icon, Customize, Advanced]

Create Scenes

A scene is a preset group of smart devices that can be programmed, customized, and activated simultaneously at the touch of a button from your smartphone or tablet. This allows you to easily set your mood, activity, or fit any special occasion. This page allows you to preset how your smart home devices should act automatically at special occasions.

[Image: Kasa app scenes screen showing options like Good Morning, Good Night, Movie Night, and Custom]

• Good Morning: Get ready for the day by turning on your devices.
• Good Night: Turn everything off before bedtime.
• Movie Night: Dim the lights for showtime.
• Custom: Create your own scene.

Discover Kasa

Use the Kasa Smart app to pair your smart Wi-Fi plug with Amazon Alexa, Google Home Assistant, and enjoy a full hands-free experience. Kasa helps manage the rest of your smart home too, working with Samsung SmartThings to trigger changes when you arrive home or leave for the day.

Launch the Kasa Smart app and go to Add Device > WORKS WITH KASA > Amazon Alexa / Google Assistant / Samsung SmartThings for detailed instructions.

[Image: Kasa app screen showing integration with Amazon Alexa, Google Assistant, and Samsung SmartThings]

Authentication

COPYRIGHT & TRADEMARKS

Specifications are subject to change without notice. TP-Link is a registered trademark of TP-Link Technologies Co., Ltd. Other brands and product names are trademarks or registered trademarks of their respective holders.

No part of the specifications may be reproduced in any form or by any means or used to make any derivative such as translation, transformation, or adaptation without permission from TP-Link Technologies Co., Ltd. Copyright © 2020 TP-Link Technologies Co., Ltd. All rights reserved.

FCC Compliance Information Statement

This equipment has been tested and found to comply with the limits for a Class B digital device, pursuant to part 15 of the FCC Rules. These limits are designed to provide reasonable protection against harmful interference in a residential installation. This equipment generates, uses, and can radiate radio frequency energy and, if not installed and used in accordance with the instructions, may cause harmful interference to radio communications.

However, there is no guarantee that interference will not occur in a particular installation. If this equipment does cause harmful interference to radio or television reception, which can be determined by turning the equipment off and on, the user is encouraged to try to correct the interference by one or more of the following measures:

• Reorient or relocate the receiving antenna.
• Increase the separation between the equipment and receiver.
• Connect the equipment into an outlet on a circuit different from that to which the receiver is connected.
• Consult the dealer or an experienced radio/TV technician for help.

This device complies with part 15 of the FCC Rules. Operation is subject to the following two conditions:

1. This device may not cause harmful interference.
2. This device must accept any interference received, including interference that may cause undesired operation.

FCC RF Radiation Exposure Statement

This equipment complies with FCC RF radiation exposure limits set forth for an uncontrolled environment. This device and its antenna must not be co-located or operating in conjunction with any other antenna or transmitter.

To comply with FCC RF exposure compliance requirements, this grant is applicable to only Mobile Configurations. The antennas used for this transmitter must be installed to provide a separation distance of at least 20 cm from all persons and must not be co-located or operating in conjunction with any other antenna or transmitter.

TP-Link USA Corporation has determined that the equipment shown as above has been shown to comply with the applicable technical standards, FCC part 15. There is no unauthorized change made in the equipment and the equipment is properly maintained and operated. Issue Date: 2020-07-06

Canadian Compliance Statement

This device contains licence-exempt transmitter(s)/receiver(s) that comply with Innovation, Science and Economic Development Canada's licence-exempt RSS(s). Operation is subject to the following two conditions:

1. This device may not cause interference.
2. This device must accept any interference, including interference that may cause undesired operation of the device.

L'émetteur/récepteur exempt de licence contenu dans le présent appareil est conforme aux CNR d'Innovation, Sciences et Développement économique Canada applicables aux appareils radio exempts de licence. L'exploitation est autorisée aux deux conditions suivantes :

1. L'appareil ne doit pas produire de brouillage;
2. L'appareil doit accepter tout brouillage radioélectrique subi, même si le brouillage est susceptible d'en compromettre le fonctionnement.

Radiation Exposure Statement:

This equipment complies with IC radiation exposure limits set forth for an uncontrolled environment. This equipment should be installed and operated with minimum distance 20cm between the radiator & your body.

Déclaration d'exposition aux radiations:

Cet équipement est conforme aux limites d'exposition aux rayonnements IC établies pour un environnement non contrôlé. Cet équipement doit être installé et utilisé avec un minimum de 20 cm de distance entre la source de rayonnement et votre corps.

Industry Canada Statement

CAN ICES-3 (B)/NMB-3(B)

Korea Warning Statements

당해 무선설비는 운용중 전파혼신 가능성이 있음.

NCC Notice

注意!

依據 低功率電波輻射性電機管理辦法

第十二條 經型式認證合格之低功率射頻電機,非經許可,公司、商號或使用者均不得擅自變更頻率、加大功率或變更原設計之特性或功能。

BSMI Notice

安全諮詢及注意事項

• Please follow the power type indicated on this product.
• Please cut off the power before cleaning the product. Do not use liquid, spray cleaners, or damp cloths for cleaning.
• Please pay attention to moisture, do not spill water or other liquids onto this product.
• Slots and openings are for ventilation to ensure reliable operation of the product and prevent overheating, do not block or cover the openings.
• Do not place this product near heat sources. Unless there is normal ventilation, do not place it in a confined space.
• Do not open the casing or repair it yourself. If the product is faulty, please contact the manufacturer or agent.

限用物質含有情況標示聲明書

Note 1: "Exceeding 0.1 wt %" and "exceeding 0.01 wt %” indicate that the percentage content of the restricted substance exceeds the reference percentage value of presence condition.

Note 2: "○" indicates that the percentage content of the restricted substance does not exceed the percentage of reference value of presence.

Note 3: The “-” indicates that the restricted substance corresponds to the exemption.

Safety Information

• The automatic operation feature is Type 1.B action according to UL 60730-1.
• The product is Pollution Degree 2, which is intended to be used in a household environment or similar.
• Keep the device away from water, fire, humidity, or hot environments.
• Do not attempt to disassemble, repair, or modify the device.
• Do not use the device where wireless devices are not allowed.
• The socket-outlet shall be installed near the equipment and shall be easily accessible.
• For passthrough devices, plug the power strips into the integrated electrical sockets of the devices, but devices of the same or another type not be stacked in normal use.
• Please read and follow the above safety information when operating the device. TP-Link cannot guarantee that no accidents or damage will occur due to improper use of the device. Please use this product with care and operate at your own risk.

Operating Temperature: 0 °C~ 40 °C (32°F ~ 104°F)

Storage Temperature: -40 °C~ 70 °C (-40°F ~ 158°F)

Operating Humidity: 10%~90%RH, Non-condensing

Explanation of the symbols on the product label

• 〰️ AC voltage
• ? Indoor use only
• μ Switch of micro-gap / micro-disconnection construction

RECYCLING

This product bears the selective sorting symbol for Waste electrical and electronic equipment (WEEE). This means that this product must be handled pursuant to European directive 2012/19/EU in order to be recycled or dismantled to minimize its impact on the environment. User has the choice to give his product to a competent recycling organization or to the retailer when he buys a new electrical or electronic equipment.