Ciro Wiring Adapter for Indian Motorcycle

Important Safety Information

⚠️ WARNING: This indication alerts you to the fact that ignoring the contents described herein can result in potential serious injury or death if not followed.

? CAUTION: This indication alerts you to the fact that ignoring the contents described herein can or will result in material damage and/or personal injury.

ℹ️ ATTENTION: This indication alerts you to the fact if you ignore this detail you will affect the performance or functionality of the product.

Product Overview and Warranty

All Ciro products are designed for "easy assembly" and/or "plug and play". Ciro recommends installation by a competent mechanic using standard mechanical procedures to assure a safe and successful installation. Please read and understand these instructions completely prior to starting installation.

Ciro products are designed and manufactured under very strict quality control. Ciro warrants that products sold to the original purchaser shall be free from any defects in materials and workmanship for a period of 3 (three) years from the date of purchase, and a limited lifetime warranty against LED failure. Ciro will have no obligation if the customer cannot show proof of purchase. Warranty will not be granted unless the part is properly installed, unmodified, and maintained. Ciro will not be liable for any consequential and incidental damages, including labor, or non-Ciro products. Please visit Ciro3d.com for our complete warranty policy.

Installation Instructions

1. Park the motorcycle on a level surface and ensure the motorcycle has time to cool down.

2. ? CAUTION: Prepare a work area and remove side covers and seat per the factory owner's manual. Be careful to protect painted surfaces. Unplug electrical harness connectors as needed.

3. Locate the OEM harness connector and unplug it. (Refer to Fig. 1)

   Figure 1 Description: This image shows the original equipment manufacturer (OEM) harness connector on the motorcycle, positioned towards the front of the bike. It is a black multi-pin electrical connector.

4. Install the new harness adapter by plugging it into the OEM harness connector. (Refer to Fig. 2)

   Figure 2 Description: This image illustrates the new harness adapter being connected to the OEM harness. It indicates the 'Right Side' and 'Left Side' of the motorcycle where these connections are made.

5. NOTE: When connecting to lights, look for the brown wire indicating the right side and the purple wire for the left side. (Refer to Fig. 3)

   Figure 3 Description: This is a close-up view of the electrical connectors and wires. It specifically highlights the colored wires within the harness. The brown wire is identified for the right side connection, and the purple wire is identified for the left side connection.

6. For additional installations, consult your specific product instruction sheet.