Ciro3D: Motorcycle Accessories & Parts
Ciro3D: Motorcycle Accessories & Parts
Installation Guide for Ciro models including: P1098135 Throttle Wing For Chicane Grips, P1098135, Throttle Wing For Chicane Grips, Wing For Chicane Grips, For Chicane Grips, Chicane Grips, Grips
Chicane™ Throttle Wing – Ciro
Ciro Throttle Wing For Chicane Grips - RevZilla
Ciro Throttle Wing For Chicane Grips - Cycle Gear
File Info : application/pdf, 1 Pages, 296.61KB
DocumentDocumentchicaneTM throttle wing WARNING This indication alerts you to the fact that ignoring the contents described herein can result in potential serious injury or death if not followed. CAUTION This indication alerts you to the fact that ignoring the contents described herein can or will result in material damage and/or personal injury. ATTENTION This indication alerts you to the fact if you ignore this detail you will affect the performance or functionality of the product. All Ciro products are designed for "easy assembly" and/or "plug and play". We recommend a competent mechanic install our products, using standard mechanical procedures to assure a safe and successful installation. Read completely and understand the instructions prior to starting installation. NOTE: Ciro products are designed and manufactured under very strict quality control. Ciro warrants that products sold to the original purchaser shall be free from any defects in materials and workmanship for a period of 3 (three) years from the date of purchase, and a limited lifetime warranty against LED failure. Ciro will have no obligation if the customer cannot show proof of purchase. Warranty will not be granted unless the part is properly installed, unmodified and maintained. Ciro will not be liable for any consequential and incidental damages, including labor, or non-Ciro products. Please visit Ciro3d.com for our complete warranty policy. Included Items: Fig.1 Installation Instructions: 1. Park motorcycle on a level surface and ensure engine has time to cool before beginning installation. 2. Remove hex screw at end of grip and remove end cap. Set the screw aside it will be reused. Fig. 1 3. Place throttle wing on end of grip and secure with saved hex screw. Tighten securely. Fig. 2 Fig.2 G0054002, REV.- For the latest version of installation instructions visit www.ciro3d.com Page 1 of 1