NYSJÖN Mirror Cabinet Assembly Instructions

Important Safety Information

WARNING! Serious or fatal crushing injuries can occur from furniture falling down. To prevent this furniture from falling down, it must be used with the wall attachment device(s) provided.

Screws(s) and plug(s) for the wall are not included. Assess the suitability of the wall to ensure that it will withstand the forces generated. Use screw(s) and plug(s) suitable for your walls and the intended load. If you are uncertain, seek professional advice. Read and follow each step of the instructions carefully.

Parts Included

The following parts are included in the package:

• 8x Dowel (103693)
• 8x Cam lock (102509)
• 4x Screw (110018)
• 2x Screw (10048881)
• 2x Washer (105494)
• 4x Bracket (123492)
• 8x Rod (101375)
• 2x Wall bracket (10032274)
• 2x Back panel support (10043569)
• 2x Door stop (106266)
• 2x Shelf support (101475)
• 1x Bag of nails (319503)
• 1x Door buffer (105494)
• 2x Cap (102509)
• 2x Base plate (10048881)
• 1x Screwdriver

Assembly Steps

1. Attach the wall brackets (10032274) to the side panels using screws (10048881) and cam locks (102509).
2. Insert the rods (101375) into the side panels.
3. Attach the bottom panel using screws (110018) and cam locks (102509).
4. Slide the back panels into the grooves of the side panels.
5. Attach the top panel using screws (102509) and cam locks (102509).
6. Insert the shelf supports (101475) into the desired positions.
7. Place the shelves onto the shelf supports.
8. Attach the doors using the provided hinges and screws.
9. Install the door buffers (105494) on the inside of the cabinet doors.
10. Attach the base plates (10048881) to the bottom of the cabinet.
11. Mount the cabinet to the wall using appropriate screws and plugs for your wall type. Ensure the cabinet is level using a spirit level.
12. Attach the door handles.

Care and Maintenance

Wipe clean with a damp cloth. Wipe dry with a clean cloth.