Nokia Essential Wireless Headphones E1300
User Guide
Powering On
Press and hold the power button for 3 seconds.
Pairing Mode
To enter pairing mode, press and hold the power button for 3 seconds. On your device, navigate to ⚙️ Settings > ? Bluetooth > My Devices and select 'Nokia E1300'.
Charging
Connect the headphones to a power source. A solid white light ⚪ indicates charging. The white light turns off ⚫ when charging is complete (100%).
Troubleshooting
| Problem | Reason | Solutions |
|---|---|---|
| Does not power on / Does not respond | Battery is low | Charge the headphones for 2 - 3 hours and reconnect. |
| No sound after pairing | Incorrect pairing | Pair the headphones again or reset the headphones. |
| Turns off automatically | Battery is low | Charge the headphones for 2-3 hours. |
| Failing to charge | Error with power supply | Perform a hardware reset. |
| No light during charging | Error with power supply | Check that the charging cable is plugged in. Ensure that the wall switch is on using a wall charger. |
| Hearing an echo | Volume is too loud or the environment is too noisy | Adjust the volume or change your location. |
| Noise in-call / Sound occasionally drops | Noisy environment or distance between earphones and mobile device is too far | Change your location or bring your headphones and mobile device closer together. |
| Sound is too soft | Low volume | Increase the volume. |
| Pairing unsuccessful / Cannot find the pairing name | Too many pairing records or not paired properly | Remove at least one pairing from your device's pairing list, reset and pair the headphones again. |
Controls
Music Controls
- Play/Pause: Double tap the touch area ▷II
- Next Track: Press and hold the right touch area for 2 seconds ⏭️
- Previous Track: Press and hold the left touch area for 2 seconds ⏮️
Call Controls
- Answer/End Call: Double tap the touch area ?
- Reject Call: Press and hold the touch area for 2 seconds ?
Voice Assistant
- Activate: Triple tap the touch area ?️
Specifications
| Wearing style | Wireless headphones |
| Ear coupling | Circumaural |
| Frequency response | 20Hz to 20kHz |
| Transducer principle | Dynamic, closed |
| Transducer size | 40mm |
| Sound pressure level (SPL) | 102dB(1kHz/1mW) |
| Impedance | 32Ω |
| Microphone principle | MEMS x 1 |
| Power supply | Built-in Lithium rechargeable batteries 400mAh/3.7V |
| Operating time | 40hrs (music playback via A2DP with 70% of the volume) with rechargeable batteries of the headphones* |
| Charging time | Approx. 1.5hrs |
| Weight | Approx. 215g |
| Volume control | Yes |
| Bluetooth | |
| Version | Bluetooth specification version 5.3 |
| Profiles | HFP, AVRCP, A2DP |
| Effective range | Line of sight approx. 30ft (10m) |
| Transmission frequency | 2400MHz to 2483.5MHz |
| Output power | 10mW (max.) |
| Supported audio format(s) | SBC |
| *Battery life depends on device settings, environment, usage and many other factors. | |
Reset
Clearing all pairings:
- Press and hold the power button for 3 seconds to turn on the headphones.
- Press and hold both touch areas simultaneously for 5 seconds to reset the headphones and clear all pairings.
Safety Guide
Important Safety Instructions
- Read the user guide and warranty manual carefully before first use.
- Do not listen at high volumes for extended periods to prevent hearing injury.
- Keep magnetic components at least 10cm (3.94 inches) away from medical implants like pacemakers and ICDs.
- Keep product, accessories, and packaging out of reach of children and pets to prevent choking hazards.
- Do not use in environments requiring special attention, such as traffic.
Preventing Product Damage and Malfunctions
- Keep the product dry and avoid extreme temperatures (0°C-40°C / 32°F-104°F).
- Use only manufacturer-provided or recommended accessories.
- Clean with a soft, dry cloth.
Safety Instructions for Lithium Rechargeable Batteries
⚠️ WARNING: Misuse or abuse of rechargeable batteries can lead to hazards like explosion, fire, heat generation, or smoke. Dispose of defective products with batteries at special collection points.
- Use only recommended batteries and chargers.
- Charge batteries only at ambient temperatures between 10°C/50°F and 40°C/104°F.
- Switch off battery-powered products after use. ⚫ OFF
- Recharge batteries regularly (approx. every 3 months) if not used for extended periods.
- Do not heat batteries above 70°C/158°F, avoid direct sunlight, and do not throw batteries into fire.
Intended Use / Liability
These headphones are designed for wireless audio communication via Bluetooth. Any use not specified in the product guide is considered misuse. The manufacturer is not responsible for damages resulting from misuse, unauthorized modifications, or incompatible accessories. Warranty may be voided under certain conditions, including unauthorized repair, mishandling, or damage from natural disasters.
Manufacturer Declarations & Recycling
Return used electronic products, batteries, and packaging to dedicated collection points to prevent uncontrolled waste disposal and promote material recycling. Electrical and electronic products contain valuable materials that can be recovered. The crossed-out wheelie bin symbol indicates that products and batteries must be collected separately at the end of their life for recycling.
China RoHS
The table indicates the presence of hazardous substances (Lead, Mercury, Cadmium, Hexavalent Chromium, PBB, PBDE) in component materials, with 'O' indicating compliance with limits and 'X' indicating exceeding limits.
China Battery Warning
Warning: Do not disassemble, impact, squeeze, or throw into fire. Do not place in high temperature environments. Do not use if severe swelling occurs. Do not use if battery is immersed in water. (*Only applicable to SEBT4).
