Nokia Essential Wireless Headphones E1200ANC User Guide
Package Contents
The package includes the Nokia Essential Wireless Headphones E1200ANC, a charging cable, and a user guide.
Getting Started
Powering On
Press and hold the [Power Button] for 3 seconds.
Pairing Mode
Press and hold the [Power Button] for 7 seconds until the indicator light flashes red/blue. On your device, navigate to Bluetooth settings, search for 'Nokia E1200ANC', and select it to pair.
Charging
Connect the charging cable to the headphones. A solid red light indicates charging. The red light turns off when the headphones are fully charged (100%).
Controls
The headphones feature intuitive controls for music playback, calls, and Active Noise Cancellation (ANC).
Music Controls
Play/Pause: Press the [Power Button] once. Next Track: Press and hold the [+] button for 2 seconds. Previous Track: Press and hold the [-] button for 2 seconds. Volume Up: Press the [+] button. Volume Down: Press the [-] button.
Call Controls
Answer/End Call: Press the [Power Button] once. Reject Call: Press and hold the [Power Button] for 2 seconds.
ANC (Active Noise Cancellation)
Toggle ANC: Press the [ANC Button]. The headphones support ANC On and ANC Off modes.
Voice Assistant
Activate Voice Assistant: Press and hold the [ANC Button] for 2 seconds.
Troubleshooting
If you encounter issues with your headphones, refer to the following table:
| Problem | Reason | Solution |
|---|---|---|
| Does not power on / Does not respond | Battery is low | Charge the headphones for 2-3 hours and reconnect. |
| No sound after pairing | Incorrect pairing | Pair the headphones again or reset them. |
| Turns off automatically | Battery is low | Charge the headphones for 2-3 hours. |
| Failing to charge / No light during charging | Error with power supply | Perform a hardware reset. Check that the charging cable is plugged in. Ensure the power source is on. |
| Hearing an echo | Volume is too loud or the environment is too noisy | Adjust the volume or change your location. |
| Noise in-call / Sound occasionally drops | Noisy environment or distance between earphones and mobile phone is too far | Change your location or bring your headphones and mobile phone closer together. |
| Sound is too soft | Low volume | Increase the volume. |
| Pairing unsuccessful / Cannot find the pairing name on the device | Too many pairing records or not paired properly | Remove at least one pairing from your device's list, reset, and pair again. |
Resetting Your Headphones
To clear all previous pairings and restore default settings, perform a reset. This typically involves holding the power button for an extended period (e.g., 7 seconds, then 3 seconds) or following specific instructions if a reset button or cable is involved.
Specifications
Technical Specifications
- Model: Nokia Essential Wireless Headphones E1200ANC
- Wearing Style: Wireless headphones
- Ear Coupling: Circumaural
- Frequency Response: 20Hz to 20kHz
- Transducer Principle: Dynamic, closed
- Transducer Size: 40mm
- Sound Pressure Level (SPL): 100dB(1kHz/1mW)
- Impedance: 32Ω
- Microphone Principle: MEMS x 1
- Power Supply: Built-in Lithium rechargeable batteries (700mAh/3.7V)
- Operating Time: Up to 50 hours (ANC off), 24 hours (ANC on) with music playback at 70% volume.
- Charging Time: Approx. 3 hours
- Ingress Protection: Anti-dust and splash proof (IP44)
- Weight: Approx. 228g
- Volume Control: Yes
Bluetooth Specifications
- Version: Bluetooth 5.0
- Profiles: HFP, AVRCP, A2DP
- Effective Range: Approx. 30ft (10m) line of sight
- Transmission Frequency: 2400MHz to 2483.5MHz
- Output Power: Max. 10mW
- Supported Audio Formats: SBC, AAC
Safety Information
Important Safety Instructions
Read the user guide and warranty manual carefully before first use. Pass the guide on with the product. Inspect the product for defects before use and stop immediately if any are found. Use only where Bluetooth transmission is permitted.
Preventing Damage to Health and Accidents
Do not listen at high volumes for extended periods to prevent hearing injury. The product's magnetic fields may interfere with medical implants like pacemakers; maintain at least 10 cm (3.94 inches) distance. Keep product, accessories, and packaging away from children and pets to prevent choking hazards. Do not use in environments requiring special attention (e.g., traffic).
Preventing Damage to the Product and Malfunctions
Keep the product dry and avoid extreme temperatures (heat sources, sunlight) to prevent deformation or malfunction. Normal operating temperature is 0°C to 40°C (32°F to 104°F). Use only manufacturer-provided or recommended accessories. Clean with a soft, dry cloth.
Safety Instructions for Lithium Rechargeable Batteries
WARNING: Misuse or abuse of rechargeable batteries can lead to explosion, fire, heat generation, or smoke/gas development. Dispose of defective products with batteries at special collection points or return to a dealer. Use only recommended batteries and chargers. Charge only between 10°C/50°F and 40°C/104°F. Switch off battery-powered products after use. Recharge regularly (every 3 months) if not in use for extended periods. Do not heat batteries above 70°C/158°F, avoid sunlight, and do not throw into fire.
Intended Use and Liability
These headphones are designed for wireless audio communication via Bluetooth, such as music playback and calls. Any use not specified in the product guide is considered misuse. The manufacturer is not liable for damage caused by misuse, incorrect accessories, battery depletion, or exceeding Bluetooth range. Users must comply with country-specific regulations.
Manufacturer Declarations and Recycling
Information on legal compliance labels is available at the end of this document. Return used electronic products, batteries, and packaging to designated collection points to prevent uncontrolled waste disposal and promote recycling. Electrical and electronic products contain valuable materials that can be recovered. The crossed-out wheelie bin symbol indicates separate collection and recycling is required at the end of the product's life.
China RoHS
The document includes a table detailing the presence of hazardous substances (Lead, Mercury, Cadmium, Hexavalent Chromium, PBB, PBDE) in product parts, adhering to SJ/T 11364 standards.
Product Support
For product support, visit http://www.nokia.com/shop/support or call 4009993019 (CN).
