Nokia Essential Wireless Headphones E1200 ANC

Contents

• Packaging Contents
• Powering On
• Pairing Mode
• Charging

Packaging Contents

The package includes:

• Nokia Essential Wireless Headphones E1200 ANC
• User guide / 用户指南/用戶指南/ユーザーガイド

Powering On

Press and hold the power button for 3 seconds.

Pairing Mode

Press and hold the power button for 3 seconds. The indicator light will turn red and blue, indicating pairing mode. On your mobile device, go to Bluetooth settings and select 'Nokia E1200 ANC' from the list of available devices.

Charging

When charging, the indicator light is solid red. When fully charged (100%), the red light turns off.

Controls

Music:

• Play/Pause: Press the power button once.
• Next Track: Press and hold the '+' button for 2 seconds.
• Previous Track: Press and hold the '-' button for 2 seconds.
• Volume Up: Press the '+' button.
• Volume Down: Press the '-' button.

ANC (Active Noise Cancellation):

• ANC On/Off: Press the ANC button.

Calls:

• Answer/End Call: Press the power button once.
• Reject Call: Press and hold the power button for 2 seconds.

Voice Assistant:

• Activate Voice Assistant: Press the power button twice.

Troubleshooting

Specifications

• Model: Nokia Essential Wireless Headphones E1200 ANC
• Bluetooth: Version 5.0
• Profiles: HFP, AVRCP, A2DP
• Effective range: Approx. 30ft (10m) line of sight
• Transmission frequency: 2400MHz to 2483.5MHz
• Output power: 10mW (max.)
• Supported audio format(s): SBC, AAC
• Wearing style: Wireless headphones
• Ear coupling: Circumaural
• Frequency response: 20Hz to 20kHz
• Transducer principle: Dynamic, closed
• Transducer size: 40mm
• Sound pressure level (SPL): 100dB (1kHz/1mW)
• Impedance: 32Ω
• Microphone principle: MEMS x 1
• Power supply: Built-in Lithium rechargeable batteries 700mAh/3.7V
• Operating time: 50hrs with ANC off, 24hrs with ANC on (music playback via A2DP with 70% volume)
• Charging time: Approx. 3 hours
• Weight: Approx. 228g
• Volume control: Yes

Reset

To reset the headphones, press and hold the power button and the ANC button simultaneously for 5 seconds.

Safety Guide

Important safety instructions:

• Read the user guide and warranty manual carefully before using the product.
• Keep this user guide with the product if passing it on to new users.
• Do not use the product if it is visibly damaged.
• Use the product only in environments where wireless Bluetooth® transmission is permitted.
• Preventing damage to health and accidents:
• Do not listen at high volumes for extended periods to prevent hearing injury.
• The product generates permanent magnetic fields that may interfere with medical implants like pacemakers and defibrillators (ICDs). Maintain a distance of at least 10cm (3.94 inches) between the magnetic components and implanted medical devices.
• Keep product parts, packaging, and accessories out of reach of children and pets to prevent choking hazards.
• Do not use the product in environments requiring special attention, such as in traffic.
• Preventing damage to the product and malfunctions:
• Keep the product dry and avoid exposure to extreme temperatures (hairdryers, heaters, prolonged sunlight) to prevent corrosion or deformation. Normal operating temperature is between 0°C and 40°C (32°F-104°F).
• Use only attachments, accessories, and spare parts provided or recommended by the manufacturer.
• Clean the product with a soft, dry cloth only.
• WARNING: In extreme cases, rechargeable batteries may leak if abused or misused, potentially causing explosion, fire, heat generation, or smoke/gas development. Dispose of defective products with built-in rechargeable batteries at special collection points or return them to your specialist dealer.
• Only use rechargeable batteries recommended by RichGo and the appropriate chargers.
• Charge the product/rechargeable batteries only at ambient temperatures between 10°C/50°F and 40°C/104°F.
• Switch off battery-powered products after use.
• Recharge the product/rechargeable batteries regularly (about every 3 months) if not using for extended periods.
• Do not heat the product/rechargeable batteries above 70°C/158°F. Avoid exposure to sunlight and do not throw the product/rechargeable batteries into fire.

Intended Use/Liability

RichGo is not responsible for any indirect or consequential loss, loss of profits, or loss of data. Warranty is void if the product has been modified or repaired by unauthorized persons, mishandled, used with incorrect voltage, damaged by natural disaster or accident, or tampered with. Warranty does not cover damage caused by impact, sand, or liquid, or operating failures. Installation and maintenance must follow manufacturer instructions. The warranty is void if the model number or item code has been erased or modified, or if the contents of the warranty policy have been modified without authorization. The warranty does not apply if the product has been used for commercial, display, demonstration, or rental purposes.

All replaced parts within the warranty period are the property of the manufacturer. Warranty covers only the hardware of the product’s main body. Accessories like cables, software, CDs, external covers, and user manuals are not covered.

Manufacturer Declarations

More information on legal compliance labels can be found at the end of this document.

Recycling: Please return used electronic products, batteries, and packaging materials to designated collection points to prevent uncontrolled waste disposal and promote material recycling. Electrical and electronic products contain valuable materials that can be recovered as materials and energy. The crossed-out wheelie bin symbol on your product, battery, literature, or packaging indicates that electrical and electronic products and batteries must be collected separately at the end of their working life. Do not dispose of these products as unsorted municipal waste; take them for recycling. Contact your local waste authority for information on your nearest recycling point.

China RoHS: The table indicates the presence of hazardous substances (Lead, Mercury, Cadmium, Hexavalent Chromium, PBB, PBDE) in the product's components. 'O' indicates the substance is below the regulatory limit, and 'X' indicates it exceeds the limit in at least one homogeneous material.

China Battery Warning: Do not disassemble, impact, crush, or throw batteries into fire. Do not place in high-temperature environments. If severe swelling occurs, do not continue to use. Do not use batteries after they have been immersed in water.

RichGo Technology (Shenzhen) Co. Ltd is a licensee of the Nokia brand for earphones and mobile accessories. Nokia is a registered trademark of Nokia Corporation. The BLUETOOTH® word mark and logos are registered trademarks owned by Bluetooth SIG, Inc. and any use of such marks by RichGo is under license.

For product support, please visit http://www.nokia.com/shop/support or call 4009993019 (CN).

Low Power Radio Frequency Equipment Technical Specification: Users must not alter frequency, increase power, or change the original design characteristics and functions of low power radio frequency equipment without approval. The use of low power radio frequency equipment must not affect flight safety and interfere with lawful communication. If interference occurs, it should be stopped immediately and improved until there is no interference. Lawful communication refers to radio communication operated in accordance with the Telecommunications Management Act. Low power radio frequency equipment must tolerate interference from lawful communication or industrial, scientific, and medical radio frequency equipment.

Clearing all pairings: To clear all pairings, press and hold the power button and the ANC button simultaneously for 5 seconds.

* Battery life depends on device settings, environment, usage, and many other factors.