NOX 70-100 700-1000W LED Floodlight

Overview

The M-Elec NOX70-100 is a state-of-the-art LED floodlight, representing the latest development in their iconic floodlight range. It features a unique offset bracket designed for ease of installation and a super slim body. The NOX V4 series is recognized for its superior brightness. The product is supported by a generous 7-Year Warranty, with an M-World 3-Year OSW (On-Site Warranty).

Applications

This floodlight is suitable for various commercial applications, including:

• General area lighting, providing illumination up to 37 meters in height from a 31-meter installation height.
• Sportsfield lighting.

Features

• Durable aluminum die-cast body with AkzoNobel performance coating.
• 180° adjustable bracket for flexible positioning.
• Fully gasketed lens and driver plate cover to protect against environmental elements.
• Power consumption is selectable between 700W, 800W, 900W, and 1000W.
• Available in both White and Warm White color temperature options.
• Features 1-10V dimming capability for adjustable light output.
• Rated IP65 for dust and water resistance.
• Rated IK10 for high impact resistance.
• An optional 165° adjustable spigot bracket accessory is available for specialized mounting.

Compliance

The product complies with SAA, IP65, IK10, and C-TICK standards.

Technical Information

*Total power consumed including driver. **Average life is calculated on expected average lifespan.

Light Distribution and Dimensions

The document includes a Candela Diagram and Isolux Plot, illustrating the light distribution pattern of the floodlight. A table details the illuminance levels at various distances:

Vertical Spread: 62.7°, Horizontal Spread: 62.8°.

Product Dimensions

The floodlight unit measures approximately 645mm (width) x 800mm (height) x 166mm (depth). Mounting bracket dimensions are detailed for installation, including a bracket length of 403mm, a width of 222.5mm, and a depth of 49mm, with a 12mm offset from the mounting surface. The bracket also features a 32.5mm adjustment point.

Installation Guide

Follow these steps for installation:

1. Switch mains power off to the fitting.
2. Remove the bracket from the fitting, ensuring to retain all screws.
3. Install the fitting using appropriate equipment and components (e.g., expansion bolts for masonry).
4. Mount the fitting back onto the bracket using the original screws and components.
5. Connect wires correctly, ensuring all connections are housed in a suitable enclosure.
6. Restore power to the fitting and test its operation.

The wiring diagram illustrates the connection of Line, Neutral, and Earth to the LED drivers, which then power the LED modules. Each driver has outputs for VO+, VO-, DIM+, and DIM-.

Accessory Installation

NOX70-100 Spigot Bracket

This accessory is compatible with the NOX70-100 floodlight.

Flat Surface Bracket Installation

The flat surface bracket installation involves four steps, as depicted in diagrams. It is designed for mounting onto flat surfaces or poles with a maximum diameter of 90.17mm (approximately 3.15 inches).

Power Selection

To select the desired wattage (700W, 800W, 900W, or 1000W), ensure the power is off before making adjustments. Unscrew the power selector cap, then toggle DIP switches 1, 2, and 3 to the corresponding positions for the desired wattage. Screw the cap back on after selection. Repeat these steps for the second DIP switch. It is crucial that both DIP switches are set to the same wattage for accurate power output and lux levels.

Please Note

• Read all instructions carefully before attempting to install the fitting. Retain this guide for future reference.
• Always disconnect power before installing or servicing the unit.
• This fitting is designed for outdoor use and should not be installed in areas with limited ventilation or high ambient temperatures.
• Do not extend low voltage cables from the power supply output.
• Ensure all components are not subjected to mechanical stress.
• Exercise caution to avoid damaging or destroying conductive paths on the circuit board.
• Adhere to all relevant electrical and safety standards, including AS3000.
• Correct electrical polarity must be observed. Incorrect polarity may destroy the product and is not covered under warranty.
• Damage caused by corrosion is not considered a material defect claim; users are responsible for providing suitable protection against corrosive agents like moisture and condensation.
• If the external flexible cable or cord of this luminaire is damaged, it must be replaced exclusively by the manufacturer, their authorized service agent, or a similarly qualified person to prevent hazards.
• The light source contained within this luminaire shall only be replaced by the manufacturer, their authorized service agent, or a similarly qualified person.

Contact & Warranty Information

For inquiries, contact M-Elec at T. 1300 222 445 or visit www.melec.com.au. Data is subject to change at any time.

For detailed information about warranties, please visit melec.com.au/legal/warranties.