Instruction Manual
Ride On Bumper Car
Ver. 2
Models: SKY6328 + SKY6329 + SKY6330 + SKY6331
Brand: BCP (Best Choice Products)
Important Safety Information
⚠️ WARNING: To reduce the risk of injury, adult supervision is required. Never use on roadways, near motor vehicles, on or near steep inclines or steps, swimming pools or other bodies of water; always wear shoes, and never allow more than one rider.
For: 1.5-6 Years Old & Up to 66 LBS
Adult Assembly Required
? Charge for 18 hours before initial use. After initial charge, follow the normal recommended charging time.
Visit us at: bestchoiceproducts.com
Safety Precautions
Please retain these instructions for future reference. Before using the vehicle, the child should understand the vehicle controls and safety issues, and demonstrate the capability to handle and operate its controls. It is the responsibility of the adult to educate the child and supervise the vehicle's use. Read the following safety warnings to any child using the vehicle before riding.
Note: For best performance, only use this vehicle on flat and hard surfaces.
Age Range: 18 months to 6 years old
Weight Capacity: 66 lbs.
The following safety hazards may result in serious injury or death:
- This product contains small parts. Keep children away during assembly. Ensure all packaging material and parts are removed from underneath the vehicle body.
- Never open the battery. Batteries contain lead and lead compounds (acids) that are toxic and corrosive, and known to the State of California to cause cancer and reproductive harm.
- Limbs, hair, and clothing can get caught in moving parts. Always wear shoes, keep limbs away from moving parts, and do not wear loose clothing while operating this vehicle.
- This vehicle does not have brakes or braking capability. Do not leave a child unattended during operation. Do not use this in a location that may require braking capability, as this could result in loss of control, which may cause serious injury or death.
- Use of this vehicle near streets, motor vehicles, steps, bodies of water, sloped surfaces, hills, wet areas, flammable vapors, in alleys, at night, or in the dark could result in an unexpected accident.
- Use of this vehicle in unsafe conditions such as snow, rain, loose dirt, mud, sand, or gravel may result in an unexpected accident such as tipping over, and could damage the electrical system or battery.
- Do not operate this vehicle in an unsafe manner. Examples include but are not limited to: pulling the vehicle with another vehicle or similar device, pushing the user, traveling at an unsafe speed.
⚠️ WARNING: To reduce the risk of injury, adult supervision is required. Never use on roadways, near motor vehicles, on or near steep inclines or steps, swimming pools or other bodies of water and always wear shoes.
- Maximum of one child is allowed in the vehicle at a time.
- Always sit in the seat when using this vehicle.
- Keep your hands, hair, and clothes away from moving parts.
- Children under 18 months of age cannot use the vehicle.
- Only drive on level ground.
- Do not drive the vehicle into loose dirt, mud, sand, fine gravel, or on wet surfaces.
Battery Warnings
The following safety hazards may result in serious injury or death:
- Use of a battery or charger other than the supplied rechargeable battery and charger may cause a fire or explosion. Only use the supplied battery and charger.
- Use of the rechargeable battery and charger for any other product may result in overheating, fire, or explosion. Never use the supplied rechargeable battery and charger with another product.
- Explosive gases are created during charging. Charge the battery in a well-ventilated area. Do not charge the battery near heat or flammable materials.
- Contact between the positive and negative terminals may result in fire or explosion. Avoid direct contact between the terminals. Picking up the battery by the wires or charger can cause damage to the battery and may result in a fire. Always pick up the battery by its case or handles.
- Liquids on the battery may cause fire or electric shock. Always keep all liquids away from the battery and keep the battery dry. Contact or exposure to battery leakage (lead acid) may cause serious injury. If contact or exposure occurs, immediately call your physician. If the chemical is on the skin or in the eyes, flush with cool water for 15 minutes. If the chemical was swallowed, immediately give the person water or milk. Do not give water or milk if the patient is vomiting or has a decreased level of alertness. Do not induce vomiting.
- Battery posts, terminals, and related accessories contain lead and lead compounds (acid) – chemicals known to the State of California to cause cancer, reproductive harm, and are toxic and corrosive. Never open the battery.
- Tampering or modifying the electric circuit system may cause a shock, fire or explosion and permanently damage the system. Exposed wiring and circuitry in the charger may cause electric shock. Always keep the charger housing closed.
Warnings Regarding Batteries:
- RISK OF FIRE: Do not bypass fuse. This may overload and damage the electrical system. Replace only with original size and type.
- Do not mix alkaline, standard (carbon zinc) and rechargeable (nickel hydride) batteries.
- Do not mix old and new batteries.
- Non-rechargeable batteries should not be charged.
- Rechargeable batteries should be charged under adult supervision only.
- Exhausted batteries should be removed.
- The supply terminals should not be short-circuited.
- Do not put batteries next to or in a heat source (fire, electronic heating device, etc.).
- Do not hit batteries against hard objects.
- Do not submerge batteries in water.
- Batteries should be inserted with the correct polarity.
Specifications
Feature | Details |
---|---|
Overall Dimensions | 27.5"(L) x 27.5"(W) x 15.7"(H) |
Weight | 17.5 lbs. |
Weight Capacity | 66 lbs. |
Age Range | 18 months - 6 years old |
Speed | Approx. 1.2 MPH |
Initial Charge Time | 18 hours |
Charging Time | 8 - 12 hours |
Run Time | 1 - 2 hours |
Battery Type | 6V 4.5AH |
Motor | DC 6V |
Charger | Input: 100V - 240V AC Output: DC 6V500MA |
Material | PP Plastic, Iron |
Tools Required
- ? Phillips Screwdriver
- ? 2 AAA 1.5V Batteries
Parts Included
- A: CAR BODY (1 PC): The main chassis and body of the ride-on car.
- B: ROTATING CASTER (1 PC): A swiveling wheel assembly for maneuverability.
- C: CHARGER (1 PC): An AC adapter for charging the vehicle's battery.
- D: REMOTE CONTROL (1 PC): A wireless remote for parental control or operation.
Icons: 66 LBS CAPACITY, 1 PERSON ASSEMBLY, UP TO 15 MIN. ASSEMBLY
Product Assembly
- Step 1: Place the car body (Part A) onto a flat, level surface with the bottom facing upward. Insert the rotating caster (Part B) into the corresponding slot on the car body.
[Diagram Description: Shows the car body upside down with a caster being inserted into a mounting point.]
- Step 2: Within the seat area, connect the two red couplers to direct power from the battery to the circuit board.
Note: Make sure the connection is secure before attempting to switch the power on.
[Diagram Description: Illustrates connecting red power connectors from the battery to the circuit board.]
Product Diagram and Operation
Note: Control the forward and reverse of the left and right drive motors with their corresponding joystick. Hold down the power button for three seconds to turn this item on or off.
Controls:
- RIGHT JOYSTICK
- LEFT JOYSTICK
- POWER SWITCH
- HORN BUTTON
- LIGHT SWITCH
- CHARGING PORT
[Diagram Description: A top-down view of the car's interior showing the placement of joysticks, buttons, and the charging port.]
Operating Instructions:
- Push both joysticks forward to go forward in a straight line.
- Push both joysticks back to go reverse in a straight line.
- To turn right, push the left joystick forward without moving the right joystick.
- To turn left, push the right joystick forward without moving the left joystick.
- To rotate counterclockwise, push the right joystick forward and the left joystick backward.
- To rotate clockwise, push the left joystick forward and the right joystick backward.
Resetting Fuse:
This product contains an automatic, resetting fuse. If the current exceeds a certain rating, the recoverable fuse will automatically shut down to prevent damage. This shutdown period will last between 5 and 60 seconds before power is restored. Please allow at least this much time before seeking technical support.
[Diagram Description: Shows a fuse box with two fuses.]
Remote Control
Controls:
- FORWARD (▲)
- REVERSE (▼)
- SPEED (S)
- STOP (P)
- TURN RIGHT (▶)
- TURN LEFT (◀)
LED Indicator:
- LOW SPEED
- MEDIUM SPEED
- HIGH SPEED
[Diagram Description: Top view of the remote control showing button labels and LED indicator states.]
Linking the Remote Control:
- Install 2 AAA Batteries into the remote control.
- Turn the power switch on the vehicle to "off."
- Press and hold both the Forward (▲) & Reverse (▼) buttons for 3 seconds. The LED indicators will flash.
- Turn the vehicle on. The red indicator lights will stop flashing, indicating a successful link.
- If the indicator lights continue to flash (indicating an unsuccessful link), remove, and reinsert batteries and repeat steps 1 to 4.
Inserting Batteries in Remote:
- Use a small Philips Head Screw Driver to remove the battery cover of the remote control.
- Insert Two AAA 1.5V batteries as shown in the diagram.
- Close the battery cover and screw driver to tighten the screw.
[Diagram Description: Shows the battery compartment of the remote control with polarity markings (+/-) for AAA batteries.]
Charging Instructions and Warnings
- The charging socket is located under the seat. Insert one end of the charger (Part C) into the charging socket and plug the other end into a wall outlet.
- Charge the battery at least 18 hours before initial use.
- On average, you will need to charge the battery between 8 and 12 hours. Do not charge the battery for more than 20 hours. Failure to charge the battery as directed could cause permanent damage to the battery and void the warranty.
- Damage to the battery may occur if it is allowed to drain completely. Do not allow the battery to drain completely.
- Check the battery and charger (supply cord, connector) for wear and damage before charging.
- Do not charge the battery if damage has occurred.
- Only an adult who has read and understood the safety warnings should handle, charge, and recharge the battery.
Attention:
- A: Please connect the power connector (picture 1) before assembling the seat. Then press the Start button as shown in picture 2. Otherwise, the car will not start because of no power supply.
- B: After charging, please unplug the charger first, then press the Start button as shown in picture 2. Otherwise, the car will not start because of no power supply.
[Diagram Description: Shows the charging port location under the seat and a wall outlet with the charger plugged in. Also shows two attention diagrams illustrating connection and start button sequences.]
Caring for Your Ride-On
- Park the vehicle indoors or cover it with a tarp to protect it from wet weather.
- Do not leave the vehicle in the sun for long periods of time, as fading may occur.
- Store in shade or cover with a tarp.
- Do not wash the vehicle with a hose.
- Do not wash the vehicle with soap.
Troubleshooting
Issue | Solution |
---|---|
The motor does not rotate | 1. Allow 5-20 seconds then restart. 2. Reconnect foot switch. 3. Check for loose connections. 4. Plug the plug in. |
Car only moves forward or backward | 1. Check the connection lines. 2. Turn the toy on and off again, and rotate the individual joysticks. |
Slow Speed | 1. Charge the battery. 2. Driving circuit board requires professional repair. |
The battery is not recharging | 1. Clear the contacts of the charging port and cable. 2. Replace the charger. |
Wheel is rotating, car is not moving | 1. Make sure all 3 wheels are in contact with the ground. |
Car is unstable moving on and off | 1. Maximum weight limit exceeded; reduce load. 2. The surface you are traveling on is not level; change locations. |
California Proposition 65
⚠️ WARNING: Battery posts, terminals, and related accessories can expose you to chemicals including lead and lead compounds, which are known to the State of California to cause cancer and birth defects or other reproductive harm, and are toxic and corrosive. Wash hands after handling. For more information go to www.P65Warnings.ca.gov.
FCC Compliance Statement
This device complies with part 15 of the FCC rules. Operation is subject to the following two conditions: (1) This product may not cause harmful interference, and (2) this device must accept any interference received, including interference that may cause undesired operation.
Note: This equipment has been tested and found to comply with the limits for a Class B digital device, pursuant to part 15 of the FCC Rules. These limits are designed to provide reasonable protection against harmful interference in a residential installation.
This equipment generates, uses, and can radiate radio frequency energy and, if not installed and used in accordance with the instructions, may cause harmful interference to radio communications. However, there is no guarantee that interference will not occur in a particular installation.
If this equipment does cause harmful interference to radio or television reception, which can be determined by turning the equipment off and on, the user is encouraged to try to correct the interference by one or more of the following measures:
- Reorient or relocate the receiving antenna.
- Increase the separation between the equipment and receiver.
- Connect the equipment to an outlet on a circuit different from that to which the receiver is connected.
- Consult the dealer or an experienced radio/TV technician for help.
WARNING: Any changes or modifications to this unit not expressly approved by the party responsible for compliance could void the user's authority to operate the equipment.
Responsible party (contact for FCC matters only):
Quality Control Dept.
15101 Red Hill Ave.
Tustin, CA 92780
Help Center & Warranty
Question about your product? We're here to help. Visit us at: help.bestchoiceproducts.com
- ? Chat Support
- ❓ Product Inquiry
- ❓ Orders FAQ
- ? Product Assembly
- ? Returns & Refunds
Product Warranty Information:
All items can be returned for any reason within 60 days of receipt and will receive a full refund, provided the item is returned in its original product packaging and includes all accessories from its original shipment. All returned items will receive a full refund back to the original payment method. Returned items will not be charged a re-stocking fee.
All returned items require an RA (Return Authorization) number, which can only be provided by a Best Choice Products Customer Service Representative when the return request is submitted. Items received without an RA may not be accepted or may increase your return processing time. Once an item has been received by Best Choice Products, refunds or replacements will be processed within 5 business days.
All returns must be shipped back to the Best Choice Products Return Center at the customer's expense. If the reason for return is a result of an error by Best Choice Products, then Best Choice Products will provide a pre-paid shipping label via email. Boxes for return shipping will not be provided by Best Choice Products, and it is the customer's responsibility to either use the original shipping boxes or purchase new boxes.
Pictures may be required for some returns to ensure an item is not damaged prior to its return. Items returned are not considered undamaged until they are received by Best Choice Products and verified as such. All damages to items are the customer's responsibility until the item has been received by and acknowledged by Best Choice Products as undamaged.
⚠️ WARNING: Manufacturer and seller expressly disclaim any and all liability for personal injury, property damage or loss, whether direct, indirect, or incidental, resulting from the incorrect attachment, improper use, inadequate maintenance, unapproved modification, or neglect of this product.