Maxim Lighting

Before Getting Started

Read the instructions carefully prior to assembling the product.

When opening the package with a sharp tool like a box knife, be careful not to damage the components inside.

Carefully remove all packaging materials and retain for future use.

Keep all hardware parts and packaging out of reach of children.

Choose a clean, level, spacious assembly area. Avoid hard surfaces that may damage the product.

Ensure that you have all required contents for complete assembly.

Take care when lifting. Assemble the product in close proximity to where you intend to install it.

Do not over-tighten screws and bolts as this may damage the threads.

Do not let children play with this product.

⚠️ Risk of suffocation! Keep packaging materials away from children.

Lamp Care Instructions

Carefully read through the instruction sheet before assembly and using the product.

⚡ Caution: Risk of shock! Disconnect from power source before assembling or cleaning.

Switch off, unplug and allow bulb to cool before replacing bulb or cleaning.

Only use the recommended bulb type and do not exceed the maximum wattage as it could cause fire.

Check the product cord to be sure it is free from tears or fraying.

Location and Cleaning

WET LOCATION: For outdoor use, caulk around the fixture with silicone sealant to prevent water intrusion. Leave a gap at the bottom to allow moisture to escape.

Cleaning & Maintenance

On polished finishes, using talc powder can reduce the appearance of fingerprints and other smudges.

For respective shade surfaces, use appropriate cleansers, e.g., glass cleaner, stone polish, & wood polish.

Clean with a soft cloth and a mild detergent. Do not use abrasive or harsh cleaners.

Periodically (every 90-180 days) make sure that the screws are fully tightened.

Prolonged exposure to heat sources may cause glazing, melting, scorching, or color fading.

Parts List

Assembly Instructions

The assembly involves mounting the fixture to a wall, connecting electrical wires, and attaching the shade.

Step 1: Mounting Bracket Installation

Attach the mounting bracket (C) to the wall using appropriate screws. Ensure electrical wires (Ground wire, Neutral (N), Positive (L)) are accessible through the bracket.

Step 2: Electrical Connections

Connect the fixture's wires to the house wiring using the provided wire connectors (F). Typically, this involves connecting the ground wire to ground, neutral to neutral, and hot/live to hot/live. A rubber washer (D) is shown in relation to the mounting screws.

Step 3: Fixture Attachment

Secure the fixture body (A) to the mounting bracket using screws (E).

Step 4: Shade Installation

Attach the glass shade (B) to the fixture body (A).