Maxim Lighting Scout 1-Light Swing Arm Sconce
Product Name: Scout 1-Light Swing Arm Sconce
Item Number: 10096WWDTN
Brand: Maxim Lighting
Light Source: 1xE26 Medium Base 9W LED (Included)
Origin: Made in China
Important: Please consult a qualified electrician for hanging fixture and wiring.
Before Getting Started
- Read all instructions carefully before assembly and use.
- Use caution when opening the package with sharp tools to avoid damaging components.
- Carefully remove and retain all packaging materials for future use.
- Keep all hardware parts and packaging out of reach of small children.
- Assemble the product in a clean, level, and spacious area. Avoid hard surfaces that may cause damage.
- Ensure you have all required contents for complete assembly.
- Lift the product carefully and assemble it in close proximity to its intended position.
- Do not overtighten screws and bolts, as this may damage the threads.
- Do not allow children to play with this product.
- ⚠️ [Risk of suffocation!] Keep any packaging materials away from children.
Lamp Care Instructions
- Read these instructions carefully before assembly and using the product.
- ⚡ [Risk of shock]. Disconnect the lamp from the power source before assembling or cleaning.
- Before replacing a bulb or cleaning, switch off the lamp, unplug it, and allow the bulb to cool down.
- Only use the recommended bulb type and do not exceed the maximum wattage, as this could cause a fire.
- Do not plug in the product if the cord is torn or frayed.
Cleaning & Maintenance
- For polished finishes, applying talc powder can help reduce the appearance of fingerprints and smudges.
- For shade surfaces, use appropriate cleansers such as glass cleaner, acrylic polish, or wood polish.
- Clean with a soft cloth and a mild detergent. Do not use abrasive cleaners.
- Periodically (every 90 days), check and ensure that all screws are fully tightened.
- Prolonged exposure to heat sources may cause glazing, melting, scorching, or fading of the material.
Contents
Ensure the package contains the following components:
| Label | Component | Quantity |
|---|---|---|
| A | BODY | x1 |
| B | MOUNTING BRACKET | x1 |
| C | SCREW #8-32 x1" | x2 |
| D | WIRE NUTS | x3 |
| E | SUPPORT SCREW #8-32 x1/2" | x3 |
| F | STEM | x2 |
| G | SHADE | x1 |
| H | NUT (Used to lock the shade) | x1 |
| I | SOCKET RING | x1 |
| J | 9W E26 FT120V BULB (Included) | x1 |
Assembly Instructions
Step 1
Do not connect the wire in the back plate. Instead, use the provided plug to connect the fixture to a power outlet.
Diagram Description: Shows the assembled lamp with its power cord and plug being inserted into a wall electrical outlet.
Step 2
Attach the MOUNTING BRACKET (B) to the wall using SCREWS (#8-32 x1") (C).
Diagram Description: Close-up view showing the MOUNTING BRACKET (B) being secured to a wall surface with two SCREWS (#8-32 x1") (C). Arrows indicate the screwing motion.
Step 3
Mount the main BODY (A) onto the wall bracket. Attach the STEM (F) sections, and then the SHADE (G) assembly by securing it with the SOCKET RING (I) and NUT (H) onto the bulb (J). Use SUPPORT SCREWS (E) as needed for stability.
Diagram Description: Shows the main BODY (A) attached to the wall. The adjustable arm (F) is extended. The SHADE (G) is shown being fitted over the bulb socket, with the SOCKET RING (I) and NUT (H) used to secure it. Arrows indicate rotation and attachment points.
