Maxim Lighting Honey 2-Light Sconce (Model 21412)
Item/Model Number: 21412
Product Description
This document provides installation, care, and maintenance instructions for the Maxim Lighting Honey 2-Light Sconce.
Lamping: Requires 2 x E26 base bulbs, up to 60W each (bulbs not included).
Origin: Made in China.
Safety and Installation Precautions
Before Getting Started
- Read all instructions carefully before assembly.
- Use caution when opening the package with sharp tools to avoid damaging components.
- Carefully remove and retain all packaging materials for future use.
- Keep all hardware parts and packaging out of reach of children.
- Assemble in a clean, level, and spacious area, avoiding hard surfaces that may damage the product.
- Ensure you have all required contents for complete assembly.
- Lift carefully and assemble the product in close proximity to its intended installation location.
- Do not overtighten screws and bolts, as this may damage the threads.
- Do not allow children to play with this product.
- ⚠️ Risk of suffocation! Keep packaging materials away from children.
Electrical Safety
- ⚠️ Caution: Risk of shock! Disconnect from the power source before assembling or cleaning.
- Turn off, unplug, and allow the bulb to cool before replacing or cleaning.
- Use only the recommended bulb type and do not exceed the maximum wattage to prevent fire hazards.
- Check the product cord to ensure it is free from tears or fraying before use.
- Professional Installation Recommended: Please consult a qualified electrician prior to installation.
Parts List
| Part | Description | Quantity |
|---|---|---|
| A | Fixture body with mounting points for shades | x1 |
| B | Glass Shade (Model GLS21411CR) | x2 |
| C | Mounting Bracket | x1 |
| D | Electrical Wires (Neutral, Positive, Green Ground Wire) | x3 |
| E | Mounting Screws (#8/32" x 1") | x2 |
| F | Set Screws (#5/32" x 0.5") | x2 |
| G | Decorative Caps/Covers | x2 |
Assembly Instructions
Follow these steps for assembly:
- Attach the mounting bracket (C) to the electrical junction box at the installation site.
- Connect the electrical wires (D) from the fixture to the corresponding wires in the junction box: connect the neutral wire (N) to the neutral wire, the positive wire (L) to the hot wire, and the green ground wire to the ground connection.
- Secure the fixture body (A) to the mounting bracket (C).
- Screw the glass shades (B) onto the bulb sockets.
- Place the decorative caps (G) onto the bottom of the shades.
- Insert the recommended bulbs (not included).
Lamp Care and Maintenance
- For polished finishes, applying talc powder can help reduce the appearance of fingerprints and smudges.
- For respective shade surfaces, use appropriate cleaners: glass cleaner for glass, stone polish for stone, and wood polish for wood.
- Clean the fixture with a soft cloth and a mild detergent. Do not use abrasive or harsh cleaners.
- Periodically (every 90-180 days), check and ensure that all screws are fully tightened.
- Avoid prolonged exposure to heat sources, as this may cause glazing, melting, scorching, or color fading of the materials.
