Savannah VX 3-Light Outdoor Sconce
Model: 40916CLBO
Brand: Maxim Lighting
Lamping: 3 x E12 40W (Not Included)
This document provides assembly instructions and care information for the Savannah VX 3-Light Outdoor Sconce by Maxim Lighting.
Before Getting Started
Read the instructions carefully prior to assembling the product.
When opening the package with a sharp tool like a box knife, be careful not to damage the components inside.
Carefully remove all packaging materials and retain for future use.
Keep all hardware parts and packaging out of reach of children.
Choose a clean, level, spacious assembly area. Avoid hard surfaces that may damage the product.
Ensure that you have all required contents for complete assembly.
Take care when lifting. Assemble the product in close proximity to where you intend to install it.
Do not overtighten the screws and bolts as this may damage the threads.
⚠️ Risk of suffocation! Keep packaging materials away from children.
Lamp Care Instructions
Carefully read through the instruction sheet before assembly and using the product.
⚡ Caution: Risk of electric shock! Disconnect from power source before assembling or cleaning.
Switch off, unplug, and allow the bulb to cool before replacing the bulb or cleaning.
Only use the recommended bulb type and do not exceed the maximum wattage, as it could cause fire.
Check the product cord to ensure it is free from tears or fraying.
? WET LOCATION: For outdoor use, caulk around the fixture with silicone sealant to prevent water intrusion. Leave a gap at the bottom to allow moisture to escape.
Cleaning & Maintenance
On polished finishes, using talc powder can reduce the appearance of fingerprints and other smudges.
For respective shade surfaces, use the appropriate cleansers, e.g., glass cleaner, stone polish, and wood polish.
Clean with a soft cloth and a mild detergent. Do not use abrasive or harsh cleaners.
Periodically (every 90-180 days), make sure that the screws are fully tightened.
Prolonged exposure to heat sources may cause glazing, melting, scorching, or color fading.
Parts List
| Part | Description | Quantity |
|---|---|---|
| A | Mounting bracket/backplate | 1 |
| B | #8-32 L25MM screws | 2 |
| C | Mounting screw | 1 |
| D | Wall mounting screws | 4 |
| E | Wire connectors | 4 |
| F | #8-32 L15MM screws | 8 |
| G | Decorative pipe/rod | 1 |
| H | Lamp sockets | 3 |
| I | Lantern body/frame | 1 |
| J | Glass panel | 1 |
| K | Glass panels | 2 |
| L | Mounting bracket/arm | 4 |
| M | Bottom frame/base | 1 |
| N | #8-32 L6MM screws | 4 |
Assembly Instructions
A line drawing depicts an outdoor lantern sconce with a decorative finial at the top, a tiered cap, a clear glass enclosure, and a base.
Step 1: Mounting the Backplate
Attach the mounting bracket (A) to the wall using screws (C and D). Ensure it is securely fastened.
Step 2: Wiring
Connect the wires from the fixture to your home's wiring. Connect the ground wire (green wire) to the ground terminal. Connect the positive wire (L) to the hot wire and the neutral wire (N) to the neutral wire. Use the provided wire connectors (E) for secure connections.
Step 3: Attaching the Lantern Body
Attach the lantern body/frame (I) to the mounting bracket (A) using screws (F). Insert the glass panels (J and K) into the designated slots within the frame. Attach the bottom frame/base (M) to the lantern body using screws (N). Ensure the decorative pipes (G) are correctly positioned.
Outdoor Installation Note
For outdoor use, caulk around the fixture with silicone sealant to prevent water intrusion. Leave a gap at the bottom to allow moisture to escape.
