1. Overview
Thank you for choosing REXING!
Rexing hopes you love your new products. For assistance or suggestions, please contact Rexing.
? care@rexingusa.com
? (877) 740-8004
The Rexing support team will respond as soon as possible.
Check us out here
- ? facebook.com/rexingusa/
- ? instagram.com/rexingdashcam/
- ? rexingusa.com/support/registration/
- ? rexingusa.com/support/product-support/
QR code for Facebook support.
QR code for Instagram support.
QR code for Rexing website.
QR code for Product Support.
2. What's in the box?
The package includes the following items:
- 1. Rexing V5 Plus Dash Cam
- 2. Rexing V5 Rear Camera with Extension Cable (20ft)
- 3. In-Car Power Cable (12ft)
- 4. 3M Adhesive Mount
- 5. USB Cable
- 6. Cable Management Tool
- 7. Quick Start Guide
- 8. Safety Guide
Diagram description: A visual layout of all the components included in the box, numbered 1 through 8.
3. Camera Overview
Description of the dash cam's buttons and ports:
Diagram description: A top view of the dash cam showing buttons labeled 1 through 5, and rear ports labeled 6 through 9. A reset button is also visible.
- 1. Power Button / Screen Toggle Button
- 2. Menu Button / Mode Button
- 3. Up Navigation Button / Emergency Lock Button
- 4. Down Navigation Button
- 5. OK (Confirm) Button / Record Button
- 6. USB Charging Port
- 7. Micro SD Card Slot
- 8. Rear Camera Port
- 9. Cabin-facing camera
Screen Icons
Description of the dash cam's LCD screen interface:
Diagram description: A representation of the dash cam's LCD screen displaying various status icons and information. Key elements include:
- Microphone status: MIC (ON) ?
- Recording status: Recording (ON) ?
- Battery status: Battery Charging ?
- Recording indicator: Flashing Blue While Recording ?
- GPS signal status: GPS Signal ?️
- Video Resolution: e.g., 1080P × 3
- Recording status indicator: Red dot
- Wi-Fi signal status: Wi-Fi Signal ?
- Current clip recording time
- Wi-Fi network details: SSID: WYK CARDV WIFI XXXXXX, PWD: 12345678
- Date: Current Date (MM/DD/YYYY)
- Time: Time (24h)
- Speed: GPS Speed (e.g., 000 mph)
4. Installation
Step 1: Install the Dash Cam
Place the 3M tape on the mount. Orient the mount square to the roof and hood line of the vehicle. Firmly press the mount onto the windshield. Wait at least 20 minutes before mounting the camera.
Diagram description: An illustration showing the correct orientation for mounting the dash cam onto the windshield.
Step 2: Insert the Memory Card
The Rexing V5 Plus accepts Micro SD memory cards (Class 10/UHS-1 or higher) up to 256GB. Ensure the device is powered down before inserting or removing a memory card. Gently push the memory card in until it clicks, then allow the spring release to eject it.
Diagram description: An illustration demonstrating how to insert a Micro SD card into the dash cam.
Step 3: Power on the Camera and Format the Memory Card
Connect the charger to the car cigarette lighter and the camera. To ensure proper recording, format any new memory card within the camera using the format function. Always back up important data before formatting.
To format the memory card:
- Insert your memory card.
- Turn on the device by connecting to a power source.
- Press OK to stop recording.
- Press the MENU button twice to enter the System Setup Menu.
- Use the ▲ and ▼ buttons to navigate to the "Format" setting.
- Press the OK button to confirm the selection.
The camera will shut down after 3 seconds. It should begin recording automatically the next time it is powered on.
Diagram description: Illustrations showing the camera connected to power, and screenshots of the "General Settings" menu with options like "Format SD-Card", "Reset Setup", and confirmation prompts ("Format Card?", "All data will be deleted.").
Step 4: Mount the Rear Camera
Mount the rear camera as shown in the illustration. Use the rear camera cable to connect it to the V5 Plus camera.
Diagram description: Illustrations showing the placement of the rear camera and routing of its cable within a car, indicating "front", "cabin", and "rear" positions for cable management.
Step 5: Installing the Camera onto the Windshield
Place the camera on the mount and carefully route the power cable around the windshield, tucking it under the trim. Plug the Car Charger Cable into a 12V DC power outlet or the car cigarette lighter. Connect the car charger to the camera. The camera will auto-start recording once powered on.
Diagram description: Illustrations showing the routing of the power cable along the windshield and dashboard, and plugging the car charger into the vehicle's power outlet.
5. Basic Operation
Device Power
The device automatically powers on when plugged into a 12V accessory socket or cigarette lighter and the vehicle is started. To turn the device on manually, press and hold the Power button until the welcome screen appears. The camera will automatically start recording when powered on.
Diagram description: Illustration of the dash cam with the Power button highlighted and labeled "Press and hold the Power button to turn the device on manually".
Menu Settings
Power on the camera. If the camera is recording, press the OK button to stop recording. Hold the MENU button and toggle to the desired mode. Press the MENU button once to enter the settings menu for a Mode. Press the MENU button twice to enter the System Settings (Set up).
Video Recording
The camera automatically starts recording when the device receives charge. The LED lights and red dot will blink when recording. Press the OK button to stop recording.
Diagram description: Dash cam screen showing recording status and camera buttons. Text below reads "The camera automatically starts recording when powered on".
EMR Mode
To use the Emergency Record Mode, hold the ▲ button to manually record a 20-second video that is automatically saved and locked. View EMR recordings by pressing the menu/playback button.
Video Playback
Playback of videos can be done on the device or a computer. To playback a video on the device, toggle to the Playback mode. Use the ▲ and ▼ buttons to toggle to the desired video. Press the OK button to play. During playback, use the OK button for pause, ▲ for rewind, and ▼ for fast forward.
To playback a video on the computer, use an SD card adapter or connect the device directly using the USB cable. To use an SD card adapter, remove the memory card and insert it into an SD card adapter, then place the adapter in the computer.
Diagram description: Illustrations showing a memory card being inserted into an SD card adapter, and a USB connector being plugged into a computer. A button labeled "Mass Storage" is also shown.
Connect USB connector to computer.
Select Mass Storage.
Wi-Fi Connect
Download the "Rexing Connect" app from the App Store or Google Play Store.
Instructions:
- To access and exit the app, hold down the OK Button.
- Open Wi-Fi settings on your phone, find "SSID" from the list, and tap to connect. (Default password: 12345678)
- Open the Rexing Connect app and tap "Connect" to enter the real-time video streaming page.
Diagram description: Illustrations of the dash cam, phone Wi-Fi settings screen, and the Rexing Connect app interface showing the "Connect" button.
Once connected, the dash cam screen will display "WiFi Connected". Using the Rexing Connect app, you can view a live preview, start/stop recording, and save captures to your mobile device.
For further instructions on Wi-Fi Connect, visit www.rexingusa.com/wifi-connect/.
GPS Logger
Access GPS information while playing back recordings using the GPS Video player (available for Windows and Mac at rexingusa.com). The dash cam automatically searches for the GPS signal when connected to the power source. Press the MENU button twice and go to System Settings. Toggle the GPS Speed Unit setting to select your preferred speed unit.
After a GPS signal is found, the screen icon turns from red to green. It records the speed and location of your vehicle as you drive.
- 0.00km/h GPS function active ?️ (Green icon)
- 0.00km/h GPS Signal (not connected) ?️ (Red icon)
Parking Monitor
Connect the dash cam to the Smart Hardwire Kit (sold separately) to activate the parking monitor function. Visit support.rexingusa.com to watch a video tutorial.
Taking Photos
To take a photo, stop video recording and hold down the ▼ button. To view a photo, stop video recording and hold the MENU button to enter Playback Mode. Use the ▲ and ▼ buttons to toggle through your photos.
To delete a photo, stop video recording, toggle to Playback Mode, find the photo, press the MENU button to toggle the Delete option, then press the OK Button and select "Delete Current" or "Delete All".
Diagram description: Illustrations showing the dash cam screen for photo viewing (displaying file name, resolution, video type, camera ID, date, and time) and the deletion options ("Delete One", "Delete All", "Protect").
Warranty & Support
Warranty
The Rexing V5 Plus Dash Cam comes with a full 12-month warranty. Register your product on the official site (www.rexingusa.com/support/registration/) to extend the warranty to 18 months.
Support
For any questions regarding your product, contact Rexing at ? care@rexingusa.com or call ? (877) 740-8004. Queries are typically answered within 12-24 hours.
Your opinion matters
Rexing is committed to improving its products, services, and user experience. Constructive feedback and suggestions are welcome.
Connect with Rexing today at ? care@rexingusa.com.
Thank you for choosing Rexing!
Compliance Information
FCCID: 2AW5W-V5C
This device complies with part 15 of the FCC Rules. Operation is subject to the following two conditions: (1) This device may not cause harmful interference, and (2) this device must accept any interference received, including interference that may cause undesired operation.
Changes or modifications not expressly approved by the party responsible for compliance could void the user's authority to operate this equipment.
REXING
FC ROHS CE ♻️ ⚡
MADE IN CHINA
