Rexing V5 Plus Dash Cam Quick Start Guide
Brand: Rexing
Model: V5 Plus
The information in this manual is subject to change without notice. Rexing All Rights Reserved
1. Overview
Thank you for choosing REXING!
We hope you love your new products as much as we do. If you need assistance, or have any suggestions to improve it, please contact us.
? (877) 740-8004
Our support team will respond you as soon as possible. Always a surprise in Rexing.
Check us out here
2. What's in the box?
The following items are included in your Rexing V5 Plus package:
- 1. Rexing V5 Plus Dash Cam
- 2. Rexing V5 Rear Camera with Extension Cable (20ft)
- 3. In-Car Power Cable (12ft)
- 4. 3M Adhesive Mount
- 5. USB Cable
- 6. Cable Management Tool
- 7. Quick Start Guide
- 8. Safety Guide
3. Camera Overview
Identify the different parts of your Rexing V5 Plus dash cam:
- 1. [Reset Button]
- 2. [Power Button / Screen Toggle Button]
- 3. [Menu Button / Mode Button]
- 4. [Up Navigation Button / Emergency Lock Button]
- 5. [Down Navigation Button]
- 6. [OK (Confirm) Button / Record Button]
- 7. USB Charging Port
- 8. Micro SD Card Slot
- 9. Rear Camera Port
- 10. Cabin-facing camera
Screen Icons
The dash cam screen displays various icons and information:
- MIC (ON): Indicates the microphone is active.
- Recording (ON): Shows that video recording is in progress.
- Battery Charging: Indicates the device is charging.
- Flashing Blue While Recording: LED indicator for active recording.
- GPS Signal: Shows the status of the GPS connection.
- Video Resolution: Displays the current recording resolution (e.g., 1080P x 3).
- Recording Status: General indicator for recording state.
- Wi-Fi Signal: Indicates the status of the Wi-Fi connection.
- Recording Time (Current Clip): Shows the duration of the current recording segment.
- Current Date (MM/DD/YYYY): Displays the current date.
- Time (24h): Displays the current time in 24-hour format.
- GPS Speed: Shows the vehicle's speed if GPS is active.
4. Installation
Step 1: Install the Dash Cam
Place the 3M tape on the mount and properly orient the mount square to the roof and hood line of the vehicle. ? Important! Ensure the T-interlock on the mount is oriented in the correct direction. Firmly press the Mount onto the windshield. Wait at least 20 minutes before mounting the camera. Orient the mount as shown in the illustration.
Step 2: Insert the Memory Card
The Rexing V5 Plus accepts [Class 10/UHS-1 or higher] Micro SD memory cards up to 256GB. You will need to insert a memory card before you can begin recording. Before inserting or removing a memory card, first ensure you've powered down the device. Gently push the memory card in until you hear a click, and allow the spring release to push the card out.
Step 3: Power on the Camera and Format the Memory Card
Power on the camera by connecting the charger to the car cigarette lighter and camera. To ensure the V5 Plus records to your memory card properly and without error. Before you start using a new memory card, you must format the card within the camera using the format function. Always backup important data stored on the memory card before formatting.
To format the memory card, make sure you have inserted your memory card, then turn on the device by connecting to a power source. Press the [OK Button] to stop recording. Then press the [MENU Button] twice to enter the System Setup Menu. Use the [Up Button] and [Down Button] buttons and toggle to the Format setting. Press the [OK Button] to confirm the selection.
You may now disconnect from power. The camera will shut down after 3 seconds. The camera should begin recording automatically the next time it is powered on.
(Screenshots show the General Settings menu with options like Format SD-Card, Reset Setup, FW Version, GPS Status, and a confirmation dialog for formatting.)
Step 4: Mount the Rear Camera
Mount the rear camera as shown below. Use the rear camera cable to connect the rear camera to the V5 Plus camera. The diagram illustrates placement for front, cabin, and rear views within a vehicle.
Step 5: Installing the Camera onto the Windshield
Place the camera on the mount and carefully route the power cable around the windscreen and tuck in under the trim. Plug the Car Charger Cable into a 12V DC power outlet or the car cigarette lighter. Connect the car charger to the camera. The camera will auto-start recording once powered on.
5. Basic Operation
Device Power
The device is automatically powered on when plugged into a 12V accessory socket or cigarette lighter and receives a charge (i.e., the vehicle is started). To turn the device on manually, press and hold the [Power Button] until the welcome screen appears. The camera will automatically start recording when powered on.
Menu Settings
Power the camera On. If the camera is recording, press the [OK Button] to stop recording. Hold the [MENU Button] and toggle to the desired mode. Press the [MENU Button] once to enter the settings menu for a Mode. Press the [MENU Button] twice to enter the System Settings (Set up).
Video Recording
The camera will automatically start recording when the device receives charge. The LED lights and red dot will blink when the device is recording. Press the [OK Button] to stop recording.
EMR Mode
To use the Emergency Record Mode, hold the [Up Button] to manually record a 20-second video that is automatically saved and locked. View EMR recordings by pressing the menu/playback button.
Video Playback
Playback of videos can be done on the device or a computer.
On the device: Toggle to the Playback mode. Use the [Up Button] and [Down Button] buttons to toggle to the desired video. Press the [OK Button] to play. During playback, use the [OK Button] (pause), [Up Button] (rewind), and [Down Button] (fast forward) buttons to control the video playback.
On a computer: Either use an SD card adapter or connect the device to the computer directly using the USB cable.
Using an SD card adapter: Remove the memory card and insert it into an SD card adapter. Place the adapter in the computer.
Using a USB cable: Connect the USB Cable to the device and the computer. After the device powers up, press the [OK Button] to select Mass Storage. On the computer, navigate to the device drive. The videos are stored at: \CARDV\MOVIE. Select the video to playback.
Wi-Fi Connect
Download the Rexing Connect app from the App Store/Google Play Store.
- To access and exit the app, hold down the [OK Button].
- Open Wi-Fi settings on your phone, find "SSID" from the list, tap to connect. (Default password: 12345678)
- Open the Rexing Connect app, tap "Connect" to enter the realtime video streaming page.
Once connected, the dash cam screen will switch to the camera view and will display "WiFi Connected" message. Using the Rexing Connect app, you can view a live preview of the dash cam screen, start / stop recording, as well as view and save your captures with your mobile device.
For further instruction regarding the Wi-Fi Connect feature, please visit www.rexingusa.com/wifi-connect/.
GPS Logger & Parking Monitor
GPS Logger
You can access GPS information while playing back your recordings using the GPS Video player (For Windows and Mac, available at rexingusa.com). The dash cam will automatically search for the GPS signal once it's connected to the power source. Press the [MENU Button] twice and go to System Settings. Toggle the GPS Speed Unit setting, and select your favorite speed unit.
After a GPS signal is found, the screen icon will turn from red to green. It will record the speed and location of your vehicle as you drive.
- 0.00km/h ? GPS function active
- 0.00km/h ? GPS Signal (not connected)
Parking Monitor
Connect the dash cam to the Smart Hardwire Kit (need to purchase separately) to activate the parking monitor function. Please visit support.rexingusa.com to watch a video tutorial.
Taking Photos
To take a photo, stop video recording and hold down the [Down Button]. To view a photo, stop video recording and hold the [MENU Button] to enter Playback Mode. Press the [Up Button] and [Down Button] buttons to toggle through your photos.
To delete a photo, stop video recording, toggle to Playback Mode, and then toggle through the videos and photos to the one you want to delete. Press the [MENU Button] to toggle the Delete option. Press the [OK Button] and select Delete Current or Delete All.
Warranty & Support
Warranty
The Rexing V5 Plus Dash Cam comes with a full 12-month warranty. If you register your product on our official site (https://www.rexingusa.com/support/registration/), you can extend the warranty to 18 months.
Support
If you have any questions regarding your product, please do not hesitate to contact us at care@rexingusa.com, or call us at (877) 740-8004. Queries are typically answered within 12-24 hours.
Your opinion matters
Rexing is firmly committed to always improving our products, services, and user experience. If you have any thoughts on how we can do even better, we welcome your constructive feedback and suggestions. Connect with us today at care@rexingusa.com.
Thank you for choosing Rexing!
FCC Compliance
FCCID: 2AW5W-V5C
This device complies with part 15 of the FCC Rules. Operation is subject to the following two conditions: (1) This device may not cause harmful interference, and (2) this device must accept any interference received, including interference that may cause undesired operation.
Changes or modifications not expressly approved by the party responsible for compliance could void the user's authority to operate this equipment.
Certifications: FC, ROHS, CE
Manufactured in: CHINA
