Grownsy ZB-A200 Water-Free Bottle Warmer User Manual
Thank You
Sincerely Thank you
Thank you so much for purchasing from us and placing your trust in our brand. Grownsy - Parent's best helper. Grownsy committed to creating modern and thoughtful baby products that let parents enjoy the ideal products that show love and care. Customer satisfaction is our first priority. For any product issues, please don't hesitate to contact us.
For any questions or issues, please email us:
We will go above and beyond to resolve any customer issue within 24 hours.
Best Regards,
Randall
Founder of GROWNSY
P.s. we mean it when we say we are grateful for every single customer, and that's why would love to send you $40 Gift Card!
Visit grownsyofficial.com/gift
[Image: US Dollar Bills]
Introduction
Please read this user manual carefully before using and save it for future reference.
Grownsy Water-Free bottle warmer
[Diagram: Grownsy Water-Free bottle warmer showing: Top lid, Warming Chamber, Operation Area, the shell, Warmer base]
Specifications
| Name | Water-Free bottle warmer |
|---|---|
| Product Model | ZB-A200 |
| US Version | 120V~60Hz |
| Rate power | 230W |
| Recommended bottle warmer size | Diameter ≤ 80mm/3.15inch |
| Recommended Material | Glass, plastic, silicone, metal, high |
| Product Size | 0.77*5.1*3.77inch |
Instructions
[Diagram: Bottle warmer with a bottle placed inside, and a power plug connected to a wall socket. The diagram illustrates the placement of the top lid and the bottle.]
- Place the top lid on the bottle warmer before use, as shown in the figure below. (Note: Do not place the top lid if the diameter of the bottle is greater than 3 inch [~7.6cm]).
- Plug in the power and make sure the current is greater than 10A ?.
- Place the bottle in the CENTER of the warming chamber and gently press the bottle so that the bottom of the bottle can touch sensor. Make sure the bottle is in the center so milk can be evenly heated. Gently press the bottle to ensure contact between the bottle and the sensor.
[Diagram: Control panel of the bottle warmer with labels pointing to different buttons and indicators.]
Control Panel Description:
- Time setting Button
- Bottle material Button
- LED display
- Plus Button [+]
- Minus Button [-]
- Operation Area
- Bottle material Indicator
- Working Mode
- Warm milk button
- On/Off Button ?
- Press the 'On/OFF' ? button to turn on.
- Press the 'material' button to select the material of the bottle.
- Press the 'Warming' button to select mode.
There are 3 modes: > 30Z, ≤ 30Z and 48 hours constant warming:
- When the milk volume > 30Z, select >30Z
- When the milk volume ≤ 30Z, select ≤30Z
- Choose constant warming function: If don't need to food immediately
7. Press '-' or '+' to set target temp.
If the milk is not warm enough, you can take the bottle out 1-2 minute later after mode turn to 48H. Milk will reach desired temp and keep warm in this mode.
Always check the temperature before you feed your baby. Gently shake the bottle or milk storage container and check the temperature of the milk by sprinkling a few drops on the inside of your wrist.
How to use DIY function
DIY Function is designed for condition when you need to set heating time according to your own wish. Press the DIY button to set heating time, and use "+" or "-" to adjust time, the adjustment range is 5-45 minutes, and it will "beep" 5 times when time is up.
[Table: Reference time setting for DIY function]
| Milk volume | Refrigerated | Frozen |
|---|---|---|
| 1-3oz | 5-8min | 10-25min |
| 3-6oz | 8-12min | 20-30min |
| 6-8oz | 12-16min | 30-40min |
Final temp may vary based on different milk, initial temp or room temp. When you find the milk is not warm enough, you can place the bag back into the appliance for extra warming.
Caution: If you leave the cap in the bottle warmer when the time indicated in the setting table, the milk may become overheated. ⚠️
This smart bottle warmer has memory function. It will remember your setting of last time to save your trouble to set again for next warming.
Precautions
- Never add water into this warmer.
- Make sure plug in single-phase source above 10A ?, and unplug during maintenance and transportation.
- Stop using the product if there is any abnormality such as peculiar smell, noise, smoke, etc.
- Never use the product in places with high temperature, humidity.
- The product must be placed on a horizontal place.
- Unplug when there is no need to use, wipe the Warming Chamber and dry it.
- Never use volatile solvents such as soap, detergent, gasoline, alcohol, etc. for cleaning.
- Keep away from this machine during working to prevent burning.
- Never wash this product for Cleaning.
- Please ensure that the distance between the bottle warmer and the wall is greater than 20cm to maintain air intake.
- If the power cord is damaged, immediately contact GROWNSY service.
- Keep children away from this product.
[Diagram: A warning symbol indicating not to touch the warming chamber while working to prevent scalding.]
Warning: Do not touch warming chamber while working to prevent scalding. ⚠️
Cleaning and Maintenance
- The rest of the accessories can be washed while the bottle warmer can only be wiped for cleaning.
- Never use volatile solvents such as soap, detergent, gasoline, alcohol, etc. for cleaning.
- Never use hard materials such as metal balls to wipe the machine to avoid scratches.
- Please save it carefully. If there no need for use.
Customer Service
GROWNSY strives for user-friendly products for newborn and household items. We don't only create a product, but also an item that filled with care love from us to our customers.
If you have any issues at all, please contact us: directly (service@grownsyofficial.com) and we will help you out.
Register Your Free Warranty
At GROWNSY® we only use the highest quality products standard - but please don't forget to register for your FREE one year warranty just in case...
