Pedrollo PLURIJET 80-100 & 80X-100X Self-Priming Multi-Stage Pumps Datasheet

Introduction

The Pedrollo PLURIJET 80-100 and PLURIJET 80X-100X are self-priming multi-stage pumps designed for pumping clean water, even in cases where air is present, and for liquids that are not chemically aggressive towards the pump's materials. They are recommended for domestic and civil applications due to their silence, reliability, and low energy consumption.

Key applications include pressurizing and distributing water in combination with pressure tanks, recovery of rainwater, and irrigation systems.

? Clean water
? Domestic use
? Civil use

Performance and Application Limits

Performance Range

Flow rate up to 130 l/min (7.8 m³/h)
Head up to 52 m

Application Limits

Manometric suction lift up to 9 m (HS)
Liquid temperature: between -10 °C and +60 °C for PLURIJET 80-100; between -10 °C and +40 °C for PLURIJET 80X-100X
Ambient temperature up to +40 °C
Max. working pressure 6 bar
Continuous service S1

Standards and Certifications

Construction and Safety Standards

EN 60335-1
EN 60034-1
IEC 60335-1
IEC 60034-1
CEI 61-150
CEI 2-3

CE Mark, EAC Mark

Certifications

Company with management system certified DNV ISO 9001: QUALITY

Installation and Use

Installation should be undertaken in well-ventilated closed areas or areas protected from bad weather.

Patents and Options

Patents - Trade Marks - Models

PLURIJET® Registered Trade Mark n. 3974301

Options Available on Request

Other voltages or 60 Hz frequency

Characteristic Curves and Performance Data

The characteristic curves graph displays Head (H) in meters on the Y-axis against Flow Rate (Q) in liters per minute (l/min) and cubic meters per hour (m³/h) on the X-axis. Multiple curves illustrate the performance of various PLURIJET models, showing that head decreases as flow rate increases. Auxiliary scales for US gpm and Imp gpm are also provided.

TIPO	POTENZA (P2)	Q (l/min)	Q (m³/h)	H (metri)
Monofase / Trifase	kW / HP
PLURIJETm 3/80 / PLURIJET 3/80	0.48 / 0.65	40	0.3 - 7.2	38 - 5
PLURIJETm 3/80X / PLURIJET 3/80X	0.48 / 0.65	40	0.3 - 7.2	38 - 5
PLURIJETm 4/80 / PLURIJET 4/80	0.55 / 0.75 (IE2)	52	0.3 - 7.8	50 - 10
PLURIJETm 4/80X / PLURIJET 4/80X	0.55 / 0.75 (IE2)	52	0.3 - 7.8	50 - 10
PLURIJETm 3/100 / PLURIJET 3/100	0.55 / 0.75	38	0.3 - 7.2	36 - 5
PLURIJETm 3/100X / PLURIJET 3/100X	0.55 / 0.75	38	0.3 - 7.2	36 - 5
PLURIJETm 4/100 / PLURIJET 4/100	0.75 / 1 (IE3)	50	0.3 - 7.8	49 - 5
PLURIJETm 4/100X / PLURIJET 4/100X	0.75 / 1 (IE3)	50	0.3 - 7.8	49 - 5

Tolerance of characteristic curves in compliance with EN ISO 9906 Grade 3B.

Standard Installation

The standard installation diagram illustrates a pump system. It shows a water source, a suction pipe leading to the pump, a non-return valve installed in the suction line, and the pump itself. The 'HS = Suction height' is indicated.

Construction Details

The following table details the components and construction characteristics of the PLURIJET pumps. Note that impeller material differs between the 80-100 and 80X-100X series.

POS.	COMPONENT	CONSTRUCTION CHARACTERISTICS
1	PUMP BODY	Stainless steel AISI 304 complete with threaded ports in compliance with ISO 228/1
2	BODY BACKPLATE	Stainless steel AISI 304
3	IMPELLERS	Stainless steel AISI 304 (PLURIJET 80-100 series) / Noryl (PLURIJET 80X-100X series)
4	DIFFUSERS	Noryl complete with anti-wear ring
5	MOTOR SHAFT	Stainless steel AISI 431
6	MECHANICAL SEAL	Seal Model: AR-13, Shaft Diameter: Ø 13 mm. Materials: Ceramic (Pump), Graphite (Stationary ring), NBR (Elastomer)
7	BEARINGS	PLURIJET 3/80, 3/100, 4/80, 4/100: 6202 ZZ - C3/6201 ZZ PLURIJET 3/80X, 3/100X, 4/80X, 4/100X: 6203 ZZ/6203 ZZ
8	CAPACITOR (Single-phase)	PLURIJETm 3/80: 12.5 µF - 450 VL (230V) / 25 µF - 250 VL (110V) PLURIJETm 4/80: 14 µF - 450 VL (230V) / 25 µF - 250 VL (110V) PLURIJETm 3/100: 20 µF - 450 VL (230V) / 60 µF - 300 VL (110V) PLURIJETm 4/100: 20 µF - 450 VL (230V) / 60 µF - 300 VL (110V) PLURIJETm 3/80X: 12.5 µF - 450 VL (230V) / 25 µF - 250 VL (110V) PLURIJETm 4/80X: 14 µF - 450 VL (230V) / 25 µF - 250 VL (110V) PLURIJETm 3/100X: 20 µF - 450 VL (230V) / 60 µF - 300 VL (110V) PLURIJETm 4/100X: 20 µF - 450 VL (230V) / 60 µF - 300 VL (110V)
9	ELECTRIC MOTOR	PLURIJETm: single-phase 230 V - 50 Hz with thermal overload protector. PLURIJET: three-phase 230/400 V - 50 Hz. Motor efficiency class: IE2 (up to P2=0.55 kW), IE3 (from P2=0.75 kW). Insulation: class F, Protection: IP X4.

An exploded view diagram shows numbered components corresponding to the table above.

Dimensions, Weight, Absorption, and Palletization

PLURIJET 80-100 Series

Dimension diagram shows pump with labeled dimensions (DN1, DN2, a, f, h, h1, h2, h3, t, n2, W, s).

Dimensions and Weight (PLURIJET 80-100)

MODEL	PORTS	DIMENSIONS mm								kg
Single-phase	Three-phase	DN1	DN2	a	f	h	h1	h2	h3	t	n2	W	s	1~	3~
PLURIJETm 3/80	PLURIJET 3/80			113	367									7.8	7.8
PLURIJETm 4/80	PLURIJET 4/80	1"	1"	138	392	182	132	51	183	182	120	87	9	9.2	8.7
PLURIJETm 3/100	PLURIJET 3/100			113	367									8.5	7.9
PLURIJETm 4/100	PLURIJET 4/100	1"	1"	138	410	202 *	132	51	183	182	120	87	10	11.7	11.7

(*) h=221 mm for single-phase versions at 110 V

Absorption (PLURIJET 80-100)

TIPO	TENSIONE (Monofase)			TENSIONE (Trifase)
TIPO	230 V	240 V	110 V	230 V	400 V	690 V	240 V	415 V	720 V
PLURIJETm 3/80	3.3 A	3.1 A	6.4 A	PLURIJET 3/80	2.5 A	1.5 A	0.9 A	2.4 A	1.4 A	0.8 A
PLURIJETm 4/80	3.9 A	3.8 A	7.8 A	PLURIJET 4/80	3.4 A	2.0 A	1.2 A	3.3 A	1.9 A	1.1 A
PLURIJETm 3/100	3.9 A	3.8 A	7.8 A	PLURIJET 3/100	3.4 A	2.0 A	1.2 A	3.3 A	1.9 A	1.1 A
PLURIJETm 4/100	6.0 A	5.8 A	12.0 A	PLURIJET 4/100	4.5 A	2.6 A	1.5 A	4.3 A	2.5 A	1.4 A

Palletization (PLURIJET 80-100)

MODEL	GROUPAGE	CONTAINER
Single-phase	Three-phase	n. pumps	n. pumps
PLURIJETm 3/80	PLURIJET 3/80	84	108
PLURIJETm 4/80	PLURIJET 4/80	72	108
PLURIJETm 3/100	PLURIJET 3/100	84	108
PLURIJETm 4/100	PLURIJET 4/100	72	108

PLURIJET 80X-100X Series