Pedrollo 4-BLOCK Series 4" Submersible Electric Pumps
Electrobombas sumergibles monobloque de 4"
General Description
The 4-BLOCK series by Pedrollo are 4-inch submersible monoblock electric pumps made of stainless steel. They are designed for installation with an integrated capacitor and thermal motor protector. These pumps feature a patented hydraulic system with independent floating impellers, making them highly resistant to sand (up to 200 g/m³). Their hydraulic systems exceed minimum efficiency index (MEI) requirements set by the ErP directive. They offer maximum performance for their type and come with a standard 20-meter power cable.
Applications: Recommended for supplying clean water, even with sand content, from wells. Their efficiency, reliability, and ease of installation make them suitable for domestic, civil, and agricultural sectors, including automatic water distribution with pressure tanks and irrigation.
Key Features:
- Stainless steel construction
- Sand resistance up to 200 g/m³
- High efficiency hydraulic system
- Integrated capacitor and thermal motor protection
- Suitable for continuous duty (S1)
- Available for vertical and horizontal operation
- Standard 20m power cable (30m available on request)
Performance Range (Campo de Prestaciones) - 60 Hz
The following tables and curves illustrate the performance characteristics of the 4-BLOCK series pumps at 60 Hz.
4-BLOCK 2 Performance Curve
(Diagram showing Head (H) in meters vs. Flow Rate (Q) in l/min and m³/h for models 4BLOCKm 2/4, 2/6, 2/8, 2/11)
4-BLOCK 2 Specifications Table
Tipo | Potencia (P2) | m³/h | 0 | 0.6 | 1.2 | 1.8 | 2.4 | 3 | 3.6 | 4.5 | |
---|---|---|---|---|---|---|---|---|---|---|---|
Monofásico | kW | HP | l/min | 0 | 10 | 20 | 30 | 40 | 50 | 60 | 75 |
4-BLOCKm 2/4 | 0.37 | 0.50 | 45 | 43.5 | 41.5 | 38.5 | 35 | 31 | 25.5 | 15 | |
4-BLOCKm 2/6 | 0.55 | 0.75 | 67.5 | 65.5 | 62 | 58 | 53 | 46 | 38 | 22.5 | |
4-BLOCKm 2/8 | 0.75 | 1 | 90 | 87 | 83 | 77 | 70 | 61.5 | 50.5 | 30 | |
4-BLOCKm 2/11 | 1.1 | 1.5 | 124 | 120 | 114 | 107 | 97 | 85 | 69.5 | 41 |
4-BLOCK 4 Performance Curve
(Diagram showing Head (H) in meters vs. Flow Rate (Q) in l/min and m³/h for models 4BLOCKm 4/3, 4/4, 4/5, 4/7)
4-BLOCK 4 Specifications Table
Tipo | Potencia (P2) | m³/h | 0 | 1.2 | 1.8 | 2.4 | 3 | 3.6 | 4.2 | 4.8 | 5.4 | 6 | 7.2 | |
---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|
Monofásico | kW | HP | l/min | 0 | 20 | 30 | 40 | 50 | 60 | 70 | 80 | 90 | 100 | 120 |
4-BLOCKm 4/3 | 0.37 | 0.50 | 34.5 | 33 | 32 | 31 | 29.5 | 28 | 26.4 | 24.2 | 21.7 | 18.7 | 11 | |
4-BLOCKm 4/4 | 0.55 | 0.75 | 45.5 | 43.5 | 42.5 | 41 | 39.5 | 37.5 | 35 | 32.5 | 29 | 24.9 | 15 | |
4-BLOCKm 4/5 | 0.75 | 1 | 57 | 54.5 | 53 | 51.5 | 49.5 | 47 | 44 | 40.5 | 36 | 31 | 18.5 | |
4-BLOCKm 4/7 | 1.1 | 1.5 | 80 | 77 | 75 | 72 | 69 | 65.5 | 61.5 | 56.5 | 50.5 | 43.5 | 26 |
4-BLOCK 6 Performance Curve
(Diagram showing Head (H) in meters vs. Flow Rate (Q) in l/min and m³/h for models 4BLOCKm 6/2, 6/3, 6/4, 6/6)
4-BLOCK 6 Specifications Table
Tipo | Potencia (P2) | m³/h | 0 | 1.5 | 3 | 4.5 | 6 | 7.5 | 9 | 10.2 | |
---|---|---|---|---|---|---|---|---|---|---|---|
Monofásico | kW | HP | l/min | 0 | 25 | 50 | 75 | 100 | 125 | 150 | 170 |
4-BLOCKm 6/2 | 0.37 | 0.50 | 19 | 18.5 | 17.8 | 16.8 | 15.2 | 13.2 | 10.4 | 7.5 | |
4-BLOCKm 6/3 | 0.55 | 0.75 | 28.5 | 28 | 26.7 | 25.2 | 22.9 | 19.7 | 15.6 | 11.5 | |
4-BLOCKm 6/4 | 0.75 | 1 | 38 | 37 | 35.5 | 33.5 | 30.5 | 26.3 | 20.8 | 15.5 | |
4-BLOCKm 6/6 | 1.1 | 1.5 | 57 | 55.5 | 53.5 | 50.5 | 45.5 | 39.5 | 31.5 | 23 |
4-BLOCK 8 Performance Curve
(Diagram showing Head (H) in meters vs. Flow Rate (Q) in l/min and m³/h for models 4BLOCKm 8/2, 8/3, 8/4)
4-BLOCK 8 Specifications Table
Tipo | Potencia (P2) | m³/h | 0 | 2.4 | 3.6 | 4.5 | 6 | 7.5 | 9 | 10.5 | 12 | 13.5 | |
---|---|---|---|---|---|---|---|---|---|---|---|---|---|
Monofásico | kW | HP | l/min | 0 | 40 | 60 | 75 | 100 | 125 | 150 | 175 | 200 | 225 |
4-BLOCKm 8/2 | 0.55 | 0.75 | 20.5 | 19.5 | 19.2 | 18.7 | 17.6 | 16.2 | 14.5 | 12.3 | 9.6 | 6.5 | |
4-BLOCKm 8/3 | 0.75 | 1 | 30.5 | 29.5 | 29 | 28 | 26.4 | 24.3 | 21.7 | 18.4 | 14.4 | 9.5 | |
4-BLOCKm 8/4 | 1.1 | 1.5 | 40.5 | 39.5 | 38.5 | 37.5 | 35 | 32.5 | 29 | 24.6 | 19.2 | 13 |
Note: Performance tolerance according to EN ISO 9906 Grade 3B.
Construction Characteristics (Características Constructivas)
The pumps are constructed with high-quality materials for durability and performance.
- 1 Impeller body and pump casing: AISI 304 stainless steel with thread according to ISO 228/1.
- 2 Pump bearing: EPDM.
- 3 Impellers: Delrin®.
- 4 Diffusers: Noryl™.
- 5 Stage housing: AISI 304 stainless steel.
- 6 Pump shaft: AISI 304 stainless steel.
- 7 Cable protector: AISI 304 stainless steel.
- 8 Filter: AISI 304 stainless steel.
- 9 Coupling support: Technopolymer and brass.
- 10 Motor shaft: AISI 431 stainless steel.
- 11 Motor casing: AISI 304 stainless steel.
- 12 Mechanical seal: Seal: ST4-16, Shaft: Ø 16 mm. Materials: Ceramic / Graphite / NBR.
- 13 Capacitor: Built-in motor capacitor.
- 14 Electric motor: Specially dimensioned submersible motor, suitable for continuous service, in a rewound oil bath (non-toxic oil). Monophasic 220 V - 60 Hz. Integrated thermal motor protection in the winding. Continuous service S1. Insulation class F. Protection IP X8.
- 15 Compensation diaphragm.
- 16 Power cable: DRINCABLE® HRC type, approved for use in drinking water by the "ACS" body according to XP P 41-250, approval no. 18 MAT NY 156. Standard length 20 meters.
Dimensions and Weights (Dimensiones y Pesos)
Tipo | Boca DN | DIMENSIONES mm | kg | ||||
---|---|---|---|---|---|---|---|
Ø | h | 1~ | |||||
4-BLOCKm 2/4 | 4 | 560 | 10.4 | ||||
4-BLOCKm 2/6 | 6 | 596 | 11.2 | ||||
4-BLOCKm 2/8 | 8 | 656 | 12.7 | ||||
4-BLOCKm 2/11 | 11 | 766 | 15.7 | ||||
4-BLOCKm 4/3 | 3 | 551 | 10.3 | ||||
4-BLOCKm 4/4 | 4 | 576 | 10.8 | ||||
4-BLOCKm 4/5 | 5 | 621 | 12 | ||||
4-BLOCKm 4/7 | 1 1/4" | 7 | 100 | 721 | 14.8 | ||
4-BLOCKm 6/2 | 2 | 539 | 10.0 | ||||
4-BLOCKm 6/3 | 3 | 571 | 10.6 | ||||
4-BLOCKm 6/4 | 4 | 622 | 11.9 | ||||
4-BLOCKm 6/6 | 6 | 735 | 14.3 | ||||
4-BLOCKm 8/2 | 2 | 539 | 10.0 | ||||
4-BLOCKm 8/3 | 3 | 591 | 11.3 | ||||
4-BLOCKm 8/4 | 4 | 672 | 13.1 |
Power Consumption (Consumos)
Tipo | TENSIÓN | |
---|---|---|
Monofásico | 220 V | |
4-BLOCKm – 0.37 kW | 4.0 A | |
4-BLOCKm – 0.55 kW | 4.7 A | |
4-BLOCKm – 0.75 kW | 6.6 A | |
4-BLOCKm – 1.1 kW | 8.3 A |
Palletization (Paletización)
TIPO | GROUPAGE | CONTAINER |
---|---|---|
n° bombas | n° bombas | |
Monofásico | ||
4-BLOCKm 2 | 55 | 80 |
4-BLOCKm 4 | 55 | 80 |
4-BLOCKm 6 | 55 | 80 |
4-BLOCKm 8 | 55 | 80 |
Typical Installation
(Diagram showing a typical installation setup for the submersible pump in a well, including static and dynamic water levels, and a schematic of the pump assembly.)