Bristan Bathroom Accessories

Single Backplate Fitting

1. Establish the position for the accessory and mark out the fixing holes (Fig. 1). We recommend that the centre distance of the accessory assembly is checked prior to drilling.
2. Drill holes to suit and insert wall plugs if required.
3. Screw the fixing plates to the wall, with the back flat to the wall (Fig. 2).
4. Loosen off the pillar grub screw, but do not remove.

Example of Single backplate fitting, the part supplied with your product may vary.

Fig. 1: Shows two types of wall plates for fixing accessories: a "2 Hole Plate" (rectangular with two mounting holes) and a "3 Hole Plate" (rectangular with three mounting holes).

Fig. 2: Illustrates the wall mounting process. The left image shows a side view of a fixing plate being attached to a wall with screws and wall plugs. The right image shows a different style of fixing plate, possibly for a double fitting.

Depending on your accessory, the shape of the backplate (where supplied) may vary.

Double Backplate Fitting - Round Fixing Plate

1. Establish the position for the accessory and mark out the fixing holes (Fig. 1). We recommend that the centre distance of the accessory assembly is checked prior to drilling.
2. Drill holes to suit and insert wall plugs if required.
3. Screw the fixing plates to the wall, with the back flat to the wall (Fig. 2).
4. Loosen off the pillar grub screw, but do not remove.

Example of Double backplate fitting, the part supplied with your product may vary.

The diagram shows components for a double backplate fitting, including screws, wall plugs, fixing plates, and a curved accessory.

Double Backplate Fitting - Square Fixing Plate

1. Establish the position for the accessory and mark out the fixing holes (Fig. 1). We recommend that the centre distance of the accessory assembly is checked prior to drilling.
2. Drill holes to suit and insert wall plugs if required.
3. Screw the fixing plate to the wall, with the back flat to the wall (Fig. 2).
4. Loosen off the grub screw, but do not remove.

Example of Double Fixing

The diagram shows components for a double fixing, including screws, wall plugs, fixing plates, and a straight accessory.

Shelf

1. Fit shelf into the brackets and secure in position by tightening the plastic screws in the pillars.
2. Follow the Double Backplate Fitting - Square Fixing Plate steps (page 3).
3. Check shelf for security.

Example of Double Fixing

The diagram shows components for attaching a shelf, including brackets, screws, and the shelf itself.

Traditional Toilet Roll Holder

1. Establish the position for the accessory and mark out the fixing holes.
2. Check the position of the market holes with the holder base prior to drilling.
3. Drill holes to suit and insert wall plugs if required.
4. Secure the holder base to the wall using the fixings supplied.
5. Feed the toilet roll tube through the base and secure in place by screwing on the cap.

Example of Toilet Roll Holder

The diagram shows the components of a toilet roll holder, including the base, screws, wall plugs, and the roll tube.

Wire Baskets

1. Establish the position for the basket and mark out the fixing holes.
2. Check the position of the marked holes before drilling.
3. Drill holes to suit and insert wall plugs if required. Screw in the fixing plate with the back flat to the wall (Fig. 2).
4. Ensure that the brass threaded washers provided, sit between the accessory and the screw head, fit screws accordingly, see (Fig. 3).
5. Fit concealing caps over the screw heads and check basket for security.

Example of Wire Basket

Fig. 3: Shows individual components for fixing: a "Cap", a "Screw", and a "Threaded Washer".

Extending Mirror

1. Establish the position for the mirror and mark out the fixing holes (Fig. 1).
2. Drill holes to suit and insert wall plugs if required.
3. Screw the fixing plate to the wall, with the back flat to the wall (Fig. 2).
4. Loosen off the grub screw (but do not remove) and place the accessory over the fixing plate with the grub screw at the bottom.
5. Tighten up the grub screws until the pillar is secure against the wall.
6. Screw mirror down onto the extending bracket and check for security.

Towel Rail

1. Follow the appropriate fixing plate steps (p.2-3) depending on your product to secure the fixing plates to the wall.
2. Fit the towel rail to the end pillars and place them over the fixing plate with the grub screws at the bottom.
3. Tighten the grub screws until the pillars are secure against the wall.