Pfister Park Avenue™ 016-FEO Diverter Trim
Quick Installation Guide
Installation Support: 1-800-PFAUCET (732-8238)
Website: pfisterfaucets.com/support
Installation Videos Available: pfisterfaucets.com/videos
Safety Information
⚠️ WARNING
To reduce the risk of injury or property damage, read all instructions before installing the product. Wear safety goggles ?. The product must be installed in accordance with all state & local plumbing & building codes. This product may require two people to install. Call a professional if you are uncertain about installing this product.
Tools and Parts
Required Tools
- Caulking or Sealant ?
- Safety Goggles ?
- Flashlight ?
- Cloth ?
Parts in the Box
The following parts are included:
- Part A
- Part B
- Part C
- Part D
Note: Items shown are not to scale.
Installation Instructions
Step 1: Install Flange & Handle Assembly
Apply caulking or sealant to gaps if needed, according to manufacturer's instructions. This step involves assembling parts B, C, and D. The diagram shows these parts being brought together, with an indication for sealant application around the base.
(Diagram Description: Shows parts B, C, D being prepared for installation, with a visual cue for applying sealant.)
Step 2: Attach Handle
Place part A (the handle/lever) vertically in the primary diverter position (Position 1). The diagram shows part A being attached to the assembly from Step 1.
(Diagram Description: Shows part A being connected to the assembled base, oriented vertically for the primary diverter function.)
Additional Information
An Extension Kit (Part Number 970-089) is available and offers an additional 7/8" if valves are roughed in too deep.
For Additional Installation Help:
Phone: 1-800-PFAUCET (732-8238)
Website: pfisterfaucets.com
