Pfister Bronson™ Toilet Paper Holder
Model: BPH-BS1
Installation Guide
For Warranty & Care Information or Ordering Replacement Parts: 1-800-PFAUCET (732-8238) | pfisterfaucets.com/support
Important Safety Information
WARNING: To reduce the risk of injury or property damage, read all instructions before installing. Wear safety goggles. Call a professional if you are uncertain about installing this product.
Required Tools
- Level
- Pencil
- Phillips Screwdriver
- Tape
- Safety Goggles
- Power Drill
- 3/16" or 1/8" Drill Bits
Parts Included
- Part A: Toilet Paper Holder (1)
- Part B: Screws (4)
- Part C: Wall Anchors (2)
- Part D: Screws (4)
- Part E: Installation Template (1)
- 2mm Hex Wrench (1)
Installation Steps
Step 1: Preparation
1A: Use Template
Use the provided template (Part E) as a guide. Ensure the template is horizontally leveled on the wall before marking. The template indicates mounting points for the brackets.
Step 2: Bracket Installation
2A: Drywall Installation
Drill four 3/16" holes at the marked locations. Insert two wall anchors (Part C) into the holes.
2B: Drywall Bracket Attachment
Attach the mounting brackets to the wall using four screws (Part B or D) into the anchors. Ensure the brackets are secure and do not jiggle.
2C: Studs/Wood/Cabinet Installation
Drill four 1/8" holes at the marked locations into studs or wood. Attach the mounting brackets using four screws (Part B or D). Ensure the brackets are secure and do not jiggle.
Step 3: Paper Holder Installation
3A: Attach Holder
Slide the toilet paper holder (Part A) onto the installed wall brackets. You may need to loosen the set screw on the holder before attaching it to the brackets.
3B: Secure Holder
Use the 2mm Hex Wrench to tighten the set screw on the holder, securing it to the brackets.
Spare Parts
Part Code | English Finish | Español Finish | Français Finish |
---|---|---|---|
C | Polished Chrome | Cromo Pulido | Chrome Poli |
K | Brushed Nickel | Niquel Cepillado | Nickel Brosse |
Y | Tuscan Bronze | Bronce Toscano | Bronze Le Toscan |
Part Number: 931-155
Cleaning Instructions
Use only a soft damp cloth to clean and shine. Using polish, detergents, abrasive cleaners, organic solvents, or acid may cause damage. Using anything other than a soft damp cloth will nullify the warranty.
Warranty Information
Pfister® offers a Limited Lifetime Mechanical & Finish Warranty for residential use. Commercial applications have limited warranty durations. Proof of purchase may be required. For warranty service, contact Pfister at 1-800-PFAUCET (732-8238) or visit pfisterfaucets.com/support. Limitations and exclusions apply, including no liability for incidental or consequential damages. The warranty does not cover damage from improper maintenance, misuse, abuse, alterations, accidents, or acts of God.