BE COOL BC13WTU2302AK Tower Fan

Introduction

Congratulations on your purchase of a BE COOL product! This manual provides essential information for the installation, operation, and maintenance of your BC13WTU2302AK tower fan. Please read it carefully to ensure safe and optimal use.

Important Safety Information

WARNING – RISK OF INJURY

• Always follow the safety instructions to protect yourself and others. Failure to do so may result in fire, electric shock, or personal injury.
• Keep packaging materials away from children as there is a risk of suffocation.
• If the power cable is damaged, it must be replaced by the manufacturer or an authorized service point to avoid risks.
• Ensure the power outlet is not defective or loose and is properly earthed.
• Avoid using extension cables as they can overheat and cause fires.
• Do not modify the device or use non-manufacturer-recommended parts, as this will void the warranty.
• Keep children away from the device and do not allow them to play with it.
• Do not use the device with wet hands.
• Do not use the device outdoors.
• Never use the device in rooms where gas, oil, or sulfur are present.
• Keep the device away from water or strong moisture, such as in damp cellars, near swimming pools, bathtubs, or showers. Ensure no water enters the device.
• Do not place objects on the device.
• Place the device on a stable and level surface.
• Never cover the device.
• Do not insert fingers, pens, or other items into the device. Ensure air inlets and outlets are never blocked.
• Always switch the device off before unplugging it.
• Do not pull the power cable to unplug; always pull the plug.
• Do not touch the plug with wet hands to avoid electric shock.
• Pull the plug when not in use, for cleaning, servicing, or moving the device.
• Keep the device clean and maintained. Contact the manufacturer's hotline for maintenance questions.
• Store the device in a safe, dry place out of reach of children when not in use.
• Keep children and animals away from plastic bags and films.
• Should the battery leak, avoid contact with battery acid. Wear protective gloves and rinse affected areas with clean water, seeking medical attention if necessary.
• Keep hair, jewelry, or clothing away from the product to prevent entanglement in the rotor blades.
• Use only original accessories to prevent damage.
• Do not insert pointed objects into the product.
• Protect the product from heat, open fire, direct sunlight, sub-zero temperatures, prolonged moisture, wetness, and shocks.
• In case of damage or malfunction, switch off the product immediately and do not use it if damaged.
• Never use corrosive or abrasive cleaning agents.
• Do not immerse the fan in water or other liquids.

WARNING! EXPLOSION HAZARD!

Improper battery replacement can lead to explosion. Replace only with the same or equivalent type. Do not throw the appliance into fire, short circuit it, or take it apart.

Intended Use

The product is designed for cooling air and is suitable for smaller areas. It is not a substitute for an air conditioner and is intended for private, residential use, not commercial use.

Device Description

The tower fan consists of a base, an aluminum tube, and the main unit. Key components include the outlet grid, inlet grid, LED screen, touch control panel, remote control keypad, and a handle.

Remote Control: The remote control operates functions like ON/OFF, Oscillation, Speed, and Timer.

Assembly

1. Join the two base parts together using the prefabricated holes.
2. Screw the threaded base into the assembled base parts from below.
3. Screw the screws into the provided threaded holes.
4. Turn the aluminum tube clockwise into the base.
5. Screw the unit clockwise onto the aluminum tube. Alternatively, the unit can be screwed directly onto the base without the aluminum tube.
6. The unit is now fully assembled and ready for use.

Commissioning

• Place the appliance on a flat, dry surface (not in wet rooms).
• Insert the plug into a standard 220-240V socket.
• If using the rechargeable battery, charge it fully (approx. 10 hours).
• Functions can be controlled via the remote control or the unit's control panel.
• When using the remote control, point it directly at the unit for proper operation.

Functions

• ON/OFF: Press the power button to turn the unit on or off.
• Wind Level: The fan starts at the lowest wind level. Press the +/- buttons to change the wind level.
• Oscillation: Press the oscillation button to turn oscillation On/Off. The fan will swing left and right.
• Night Mode: Press the night mode button to activate this mode. Press again to change the wind level in night mode.
• Timer: Press the timer button to activate the automatic switch-off timer. Press repeatedly to select the time (2, 4, 6, or 8 hours) after which the unit will switch off.
• Air Purification: This function runs automatically in all modes, adjusting its strength based on ambient air quality.

Display Indication

• Normal Mode: Displays the selected wind strength.
• Oscillating Mode: Displays the selected wind strength while oscillating.
• Timer Mode: Alternates between current wind strength and the time until automatic switch-off.
• Night Mode: Displays the selected wind strength.

Cleaning

• Caution: Disconnect the appliance from the power socket and ensure it has stopped completely before cleaning.
• Use a soft cloth for cleaning. For stubborn dirt, use warm soapy water.
• Do not use solvents, scouring agents, metal utensils, or hard brushes, as they can damage the plastic housing.
• Do not immerse the fan in water or other liquids. Avoid dripping water onto the motor housing.

Technical Information

Warranty

BE COOL provides a 2-year warranty from the date of purchase, valid in Austria only. This warranty covers free repair or replacement of the device. It does not cover normal wear and tear, damage due to non-compliance with the manual, commercial use, external damage, improper use, or unauthorized repairs. For service, contact the customer hotline or your dealer. A flat rate of €60 may apply for operating errors or if no fault is found.

To claim warranty service, the original invoice and warranty certificate must be presented.

Contact Information

Schuss Home Electronic GmbH

Scheringgasse 3, A-1140 Wien

Tel: +43 (1) 97 0 21

Website: www.becool.at

Recycling and Disposal

Recycling: Packaging materials can be recycled. Dispose of them in sorted waste.

Disposal: Electrical and electronic equipment (WEEE) must be disposed of separately at designated collection points, not in unsorted waste, to protect resources and the environment.

Battery Disposal: Batteries and accumulators contain hazardous substances and must not be disposed of in household waste. Dispose of used batteries at municipal collection centers. Symbols on batteries indicate their contents (e.g., Li for Lithium, Al for Alkali, Mn for Manganese).

Declaration of Conformity

This article complies with the basic requirements, regulations, and directives of the EU. A detailed declaration of conformity can be found at: https://www.schuss-home.at/downloads