BE COOL BCSN40CMZ Mist Fan

Description of the Unit

The BE COOL BCSN40CMZ is a mist fan designed exclusively for the ventilation of dry rooms. It is intended for private use only and is not suitable for commercial use. The fan simulates a natural breeze and can be operated via the control panel on the unit or with the provided remote control.

Key Components:

• Front protective grille
• Fan blade
• Fog plate
• Fog tube
• Control panel and display
• LED light
• Standpipe
• Stand
• Motor
• Water tank

Safety Instructions

General Safety:

• Read all instructions carefully before installation, operation, or maintenance.
• Protect yourself and others by following safety instructions. Failure to do so could result in personal injury, property damage, or loss of warranty coverage.
• Keep children away from packaging materials as there is a danger of choking if swallowed.
• Do not use the appliance if the power supply cable is damaged. It must be replaced by the manufacturer or an authorized service center.
• Ensure the electrical socket is not defective or loose and is reliably earthed.
• Avoid using extension cords as they can overheat and cause a fire.
• Do not adapt or modify the appliance. Use only manufacturer-recommended spare parts and accessories.
• If the unit has a defect, switch it off and contact your dealer or the customer hotline.
• Children under 8 and persons with reduced physical, mental, sensory, or spiritual capabilities, or lack of experience and knowledge, should only use the appliance under supervision and with proper instruction.
• Do not operate the unit unattended. Always switch it off when leaving the room.
• Children must not play with the appliance.
• Do not twist or bend the mains cable.
• Do not use the appliance with wet hands.
• Do not use the unit outdoors.
• Never operate the unit in rooms where gas, oil, or sulphur are present.
• Do not use the unit near water or high humidity (e.g., damp basements, swimming pools, bathtubs, showers). Ensure no water enters the unit.
• Do not place objects on the unit.
• Place the unit on a stable and level surface.
• Never cover the unit.
• Never insert fingers, pens, or other objects into the unit. Ensure air inlet and outlet are not blocked.
• Always switch off the appliance before unplugging it from the mains.
• Do not pull on the mains cable to disconnect the appliance. Always pull the plug.
• Do not handle the plug with wet hands to avoid electric shock.
• Unplug the appliance when not in use, before cleaning, maintenance, or moving it.
• Keep the unit in good condition by maintaining and cleaning it. Contact the customer hotline/service center for maintenance questions.
• Store the appliance in a safe, dry place out of reach of children when not in use.

Electrical Connection:

• Before connecting to the mains, check that the type of current and mains voltage correspond to the specifications on the appliance type plate.

Assembly

Follow these steps for assembly:

1. Remove all parts from the packaging.
2. Place the main body on the fan frame and tighten the lock nut at the bottom of the frame. Ensure the notch on the frame locks with the hole on the fan body (See Fig. A).
3. Align the screw hole on the rod with the screw hole on the fan body, insert the motor, and fix it with the screw.
4. Place the rear grille on the motor (handle pointing upwards) and tighten the grille fixing screw clockwise.
5. Remove the black sleeve on the motor spindle. Place the fan blade on the motor spindle and tighten it with the wing screw (anticlockwise).
6. Loosen the screw on the protective ring. Attach the protective ring to the front grille. Place the front grille over the rear grille with the logo horizontally and adjust the protective ring on the rear and front grille so it is properly seated between the locking tabs.
7. Ensure both rear and front grille edges are inserted into all molded locking tabs, then tighten the screw on the guard ring.
8. Attach the fog tube properly to the fog outlet on the front grille. Ensure correct attachment to prevent leaks.

Filling the Water Tank

• Avoid moving the fan when it is filled with water.
• The maximum capacity of the water tank is 2.6 liters.
• Pour water into the storage tank by pulling the tanks upwards and unscrewing the tank lid (See Fig. B).
• ATTENTION: Ensure the product is disconnected from the power supply before filling or refilling the water tank.
• Use only water in the water tank. Do not add chemicals, oils, or other additives.
• Use only cold or lukewarm water (not warmer than 40°C).

Operation

Place the fan on a dry and stable surface and plug it into the socket. A short "PEEP" sound indicates power supply.

Control Panel and Remote Control

The fan can be operated via the control panel or the remote control.

Control Panel / Remote Control Functions:

• 1. ON/OFF: Switches the fan on or off. Features a memory function for previous settings.
• 2. OSC (Oscillation): Activates or stops the left and right pan function.
• 3. TIMER (1-8 hours): Sets the timer for automatic shut-off. The timer indicator lights up, and the display shows the selected hour.
• 4. MODE: Selects operating modes:
• Normal Mode: Constant speed, oscillation can be switched on/off.
• Nature Mode: Simulates a natural breeze with cyclical on/off pattern.
• Sleep Mode: Simulates a gentle breeze suitable for nighttime use.
• 5. SPEED: Adjusts fan speed to Low/Medium/High. Speed levels are indicated by symbols on the display.
• 6. LED: Turns the front LED lights on or off. Press and hold for 3 seconds to switch on/off.
• 7. MIST: Activates the mist function when the water tank is sufficiently filled. Press again to switch off. The fan will automatically switch off mist if the water level is too low.

Remote Control Usage:

• Ensure the fan is connected to power.
• Point the remote control at the sensor (indicated by a symbol) on the front of the control panel.
• Press the desired button.
• Handle the remote control carefully; do not drop it. Dispose of batteries properly at the end of their life.
• The unit has an infrared sensor. Ensure the remote is pointed at the sensor and the signal path is not blocked.
• A beep sounds each time a button is pressed.

Cleaning

• Always disconnect the mains plug before cleaning.
• Do not immerse the unit in water or spray it with liquids.
• Do not use solvents or chemical cleaning products.
• Store the fan in a dry place when not in use.
• At the end of the season, wipe off dust. If necessary, dismantle the grille and clean the fan with a soft, damp cloth.
• Remove and clean the water tank with lukewarm water. Ensure it is completely dry before replacing.
• Drain any remaining water from the appliance using the water drain (marked with an arrow).

Technical Information

Contact Information

For further information and service, contact:

Schuss Home Electronic GmbH
Scheringgasse 3, A-1140 Wien
Tel: +43 (1) 97 0 21 – 0
Website: www.becool.at

Warranty

BE COOL provides a 2-year warranty period from the date of purchase, valid in Austria. For warranty claims, contact the customer hotline or your dealer. Repairs not performed by authorized service centers will void the warranty.

The warranty does not cover:

• Consequential damage due to improper use.
• Normal wear and tear.
• Damage due to failure to follow operating instructions.
• Commercial use.
• Mechanical damage from external influences (drops, impacts, improper use).
• Improper handling.
• Unauthorized service center opening.
• Damage from improper handling of condensate drain valves or water tanks.
• Unfulfilled consumer expectations.
• Damage due to force majeure (water, lightning, overvoltage).
• Tampering with the type designation or serial number.
• Services outside of authorized workshops, including transport costs and risks.

A flat fee may be charged for service calls where no fault is found or for operator errors.

The 2-year warranty is valid only upon presentation of the purchase receipt and the warranty certificate, which must include the device type and serial number.

Statutory warranty rights are not affected by this warranty.