USER MANUAL

Basin Countertop

Waste, trap and tap sold separately.

Illustration of two basin designs: a simple rectangular outline and a more detailed oval outline with a tap hole.

Please note: Image is for illustrative purposes only and may differ slightly to the actual product.

• Single-person assembly
• Tools required
• We always recommend using professional tradespeople to install your product.

Version: V3_12.10.21

Congratulations on your purchase

And welcome to our growing gang of savvy shoppers.

We're on a mission to bring you extraordinary bathroom products, for less. From modern to traditional style ceramics, plus the gorgeous fixtures, fittings and furniture to match. So, you can fall in love with your space every single day.

As one of the UK's largest independent bathroom stores, we've received countless awards; including the National Business Awards UK, the Digital Entrepreneur Awards and being placed on The Sunday Times Fast Track 100.

We hope your new product exceeds your highest expectations. However, if you experience any problems, please:

• Log in to your account and contact our customer services team via your self-serve portal – betterbathrooms.com/CustomerAccount/Login
• Contact us via betterbathrooms.com/content/contact-us

Important information

• Please read these instructions thoroughly and retain for future reference.
• Always check for pipes and cables before drilling.

Parts

• 1 x Basin

Tools required

Silicone, drill and hole cutter.

Installation

1. Proceed to cut holes for waste and tap as required, ensuring that the tap hole is positioned at a distance which does not cause interference with the basin.

   Illustration showing a drill bit creating a hole in a surface, with a basin outline below it.

2. Seal the inside and exposed edge after cutting to prevent water or moisture penetration.

   Illustration showing a sealant gun applying sealant around a cut hole on a surface, with arrows indicating the application direction.

Please note: Allow all sealant to dry for at least 24 hours before use ⏳ 24

3. Fit the basin waste to the basin as shown (and follow waste instruction).

   Illustration showing a basin with a waste fitting being inserted from the top into the basin's waste hole.

4. Apply a bead of silicone slightly from the edge of the basin.

   Illustration showing a close-up of a basin edge with a bead of silicone being applied.

5. Apply the silicone slightly in from the outer edge on the underside of the basin.

   Illustration showing two views of a basin edge. The left shows a correct application of sealant (neat bead). The right shows an incorrect application (sealant dripping).

   ✔️ Correct application

   ❌ Incorrect application

6. Place the basin into position with the waste through the drilled hole to allow connection to the waste trap (not supplied).

   Illustration showing a basin being lowered into a countertop, with the basin's waste pipe aligning with a pre-drilled hole in the countertop. An arrow indicates the waste pipe passing through the hole.

Please note: Allow all sealant to dry for at least 24 hours before use ⏳ 24

Cleaning

To maintain the surface finish of your product, wipe clean after every use, using a clean damp cloth. A mild detergent mixture can be used. Do not use abrasive cleaning agents or materials which can strip and scratch the surface; the use of these agents or materials can invalidate your guarantee.

For more information