USER MANUAL

Product

The following basin wastes are covered by this manual:

• ARIMB018 - Matt Black Slotted Sprung Basin Waste
• ARIBB020 - Brushed Brass Slotted Basin Waste
• CHSBW001 - Chrome Slotted Basin Waste
• ARIMW005 - Matt White Slotted Basin Waste
• ARIVRG005 - Vapour Rose Gold Slotted Basin Waste
• ARIMB019 - Matt Black Unslotted Sprung Basin Waste
• ARIBB021 - Brushed Brass Unslotted Basin Waste
• CHUBW001 - Chrome Unslotted Basin Waste
• ARIMW006 - Matt White Unslotted Basin Waste
• ARIVRG006 - Vapour Rose Gold Unslotted Basin Waste

Assembly Notes:

• Single-person assembly
• It is always recommended to use professional tradespeople to install your product.

Version: V2_3/9/2022

Congratulations on your purchase

And welcome to our growing gang of savvy shoppers.

Better Bathrooms is on a mission to bring you extraordinary bathroom products, for less. From modern to traditional style ceramics, plus gorgeous fixtures, fittings, and furniture to match, allowing you to fall in love with your space every single day.

As one of the UK's largest independent bathroom stores, Better Bathrooms has received numerous awards, including the National Business Awards UK, the Digital Entrepreneur Awards, and recognition on The Sunday Times Fast Track 100.

Important information

We hope your new product exceeds your expectations. However, should any problems occur, please:

• Log in to your account and contact our customer services team via your self-serve portal: betterbathrooms.com/CustomerAccount/Login
• Contact us via: betterbathrooms.com/content/contact-us

Installation Guidelines:

• Please read these instructions thoroughly and retain for future reference.
• Installation must be carried out in compliance with The Water Fittings Regulations and Scottish Water Byelaws.
• The system must be flushed prior to installation. Failure to do so may clog the filter, resulting in a small discharged water volume or uncontrolled temperature.
• Pressures must be equal for optimum performance.
• Do not connect hot and cold water supply lines in reverse, as this could result in hot water flowing from the cold line and cause scalding.
• The feed-water temperature should not exceed 85°C. Exceeding this temperature may cause scalding, shorten the service life of faucets, or damage the faucet.
• After installation, ensure the faucet is securely mounted and checked for leaks.

Parts / Diagrams

The document shows the individual parts of the basin waste assembly, numbered 1 through 8, corresponding to the parts list table. Part 1 is the clicker dome, 2 is the O-ring, 3 is the piston kit, 4 is the drain body, 5 and 6 are rubber washers, 7 is a plastic gasket, and 8 is the locknut.

Dimensions

Two diagrams illustrate the dimensions of the basin waste. Both show a circular top with a clicker mechanism. The overall height is indicated as 90mm (with a range of 90-110mm), and the diameter of the top is 66mm. The thread size is G1¼. The diagrams also show the depth of the drain body as 58mm.

Tools required

• Seal tape
• Spanner

Installation

Slotted/Unslotted Basin Waste

Note: Silicone sealant can be used.

Diagram shows the installation sequence for the basin waste. It illustrates inserting the drain body (part 1) from above the basin, followed by a rubber washer (part 2), plastic gasket (part 3), and securing with the locknut (part 4).

• Unscrew the locknut (part 4), and remove the plastic gasket (part 3) and rubber washer (part 2).
• Insert the drain body (part 1) from above the basin.
• For the slotted basin waste, ensure the slot aligns with the overflow on the basin.
• Install the rubber washer (part 2), plastic gasket (part 3), and tighten with the locknut (part 4).
• To fill the basin, press down the clicker dome to close the waste, and press again to release the water.
• Check all the joints for leaks.

Troubleshooting

Maintenance and Cleaning

To maintain the surface of your product, wipe with a clean damp cloth and wipe dry. Do not use any abrasive cleaning agents or materials. If any harsh chemicals come into contact with the surface of the product, rinse and wipe clean immediately.