USER MANUAL

Product Overview

• Waste, trap and tap sold separately.
• Basin and pedestal supplied in separate boxes.

[Image Description: A diagram showing a wall-mounted semi-pedestal basin, a type of bathroom sink designed to be fixed to the wall with a supporting pedestal.]

Multi-person assembly

Tools required.

We always recommend using professional tradespeople to install your product.

Version: V1_1/12/23

Welcome and Company Information

And welcome to our growing gang of savvy shoppers.

We're on a mission to bring you extraordinary bathroom products, for less. From modern to traditional style ceramics, plus the gorgeous fixtures, fittings and furniture to match. So, you can fall in love with your space every single day.

As one of the UK's largest independent bathroom stores, we've received countless awards; including the National Business Awards UK, the Digital Entrepreneur Awards and being placed on The Sunday Times Fast Track 100.

We hope your new product exceeds your highest expectations. However, if you experience any problems, please:

• Log in to your account and contact our customer services team via your self-serve portal: betterbathrooms.com/CustomerAccount/Login
• Contact us via: betterbathrooms.com/content/contact-us

Important Information

• Please read these instructions thoroughly and retain for future reference.
• Manufactured to BS EN14688 Sanitary appliances - wash basins.
• Please ensure that the product is checked for damage prior to installation; any damage reported after installation will not be covered.

CE

Tools Required

Drill, drill bit, spanner, hammer, and silicone.

Installation

IMPORTANT! Below is the suggested method of installation to a solid wall; if the wall type is different, you will require a different fixing type (fixings not supplied).

[Diagram Description: Shows wall fixings including a wall plug, screw, plastic washer, and nut. The screw goes through the washer and nut, and into the wall plug.]

Please note: Before commencing any installation, check for wires and pipes that will not be damaged during drilling.

Installing basin to the wall

1. Offer the basin to the wall, checking that it is level, then drill the wall in the required location.

   [Diagram Description: Illustrates drilling a hole into a wall for the basin fixing.]

   Please note: If you are drilling into a tile, it is recommended to tape the wall in the area to be drilled to prevent slipping.

2. Insert the wall plug into the drilled hole then tap it to the finished wall surface.

   [Diagram Description: Shows a wall plug being inserted into a drilled hole and tapped flush with the wall surface.]

3. Insert the fixing bar and tighten into the wall using a spanner or grips.

   [Diagram Description: Shows a fixing bar being screwed into the wall plug.]

4. Hold the basin over the fixing bar then place the washers over the fixing bar as shown in the installation method diagram at the beginning.

   Please note: You will require two people for this section of the installation.

   [Diagram Description: Shows the basin being positioned over the fixing bar, with washers being placed onto the bar.]

5. Connect the nut and tighten into position using a spanner; do not overtighten.

   [Diagram Description: Shows a nut being attached to the fixing bar and tightened with a spanner.]

6. Check that the basin is stable then seal along the back edge.

   [Diagram Description: Shows sealant being applied to the back edge of the basin where it meets the wall.]

   Please note: Allow all sealant to dry for at least 24 hours before use basin pedestal.

   [24 hours for installation]

Pedestal Installation

[Diagram Description: A detailed diagram showing the pedestal being positioned against the wall and marked for fixing. It also shows measuring the pedestal's thickness to determine the bracket position.]

Place the pedestal against the wall in the required position ensuring this position will meet the basin.

Mark the outer edge of the pedestal.

Lift the pedestal away and measure the thickness of the pedestal, mark this dimension in from the previous mark. This will give the position for the fixing bracket.

Securing the Pedestal Brackets

[Diagram Description: Shows placing brackets onto marks, drilling screw positions, and securing brackets to the wall.]

Place the brackets onto the marks and through the hole mark the screw position.

Depending on your wall type you will need:

• If fitting to a solid wall: Drill holes and insert plugs (Check for pipes). Secure brackets using screw and washer provided.
• If fitting to a plasterboard wall: Suitable fitting will be required. Screw the brackets to the wall using a suitable fitting (not supplied).

Once the brackets are secured, place the pedestal over the brackets.

Align holes in the side walls of the pedestal with the holes in the fixing bracket.

Fit the screw cups into the holes on the pedestal.

Fit the screw through the cup and into the brackets and tighten the screw.

Finally, fit the screw cover.

Please note: Allow all sealant to dry for at least 24 hours before use.

[24 hours for installation]

Cleaning

To maintain the surface finish of your product, wipe clean after every use, using a clean damp cloth. A mild detergent mixture can be used. Do not use abrasive cleaning agents or materials which can strip and scratch the surface; the use of these agents or materials can invalidate your guarantee.

For more information

• Visit: betterbathrooms.com
• Email: customerservices@buyitdirect.co.uk
• Call: 0330 390 3062
• Write to: Trident Business Park, Neptune Way, Huddersfield, HD2 1UA

better bathrooms

Part of the BuyltDirect Group