Installation Steps
Follow these steps to install your Tabor Waterfall Wall Mounted Basin Mono:
Step 1: Valve Body Installation
The concealed valve body is prepared for mounting within the wall. Ensure water supply connections (indicated by [connection C]) and the flexible hose connection (indicated by [hose connection H]) are accessible.
Step 2: Mounting Plate and Supply Connection
Attach the wall mounting plate securely. Connect the water supply hose to the valve body using the provided fittings.
Step 3: Trim and Handle Assembly
Fit the decorative trim plate over the valve body. Attach the control handle mechanism to complete the assembly.
Step 4: Final Assembly
The wall-mounted basin mixer tap is now fully assembled and ready for final connection and testing.
Technical Specifications
Detailed dimensions and connection information for the Tabor Waterfall Wall Mounted Basin Mono.
| Dimension | Value |
|---|---|
| Overall Width | 200 mm |
| Faceplate Height | 100 mm |
| Projection from Wall | 180 mm |
| Spout Height | 96 mm |
| Spout Reach | 75 mm |
| Handle Width | 50 mm |
| Handle Height | 20 mm |
| Inlet/Outlet Connection | G1/2 |
| Wall Mounting Depth | 27 mm - 40 mm |
Important Information
Water Pressure Requirements
Please check that your water pressure is suitable for this product before installation. Details can be found on the Better Bathrooms website. Recommended minimum working pressure: 0.5 bar. Maximum working pressure: 3 bar.
Installation Compliance
All installation work must be carried out to comply with The Water Supply (Water Fittings) Regulations and Byelaws in Scotland.
Cleaning and Maintenance
To maintain the product finish, wipe using a clean damp cloth. Do not use abrasive cleaning materials or cleaning agents.
