Before You Begin
This section outlines the tools required, important safety information, and a list of all hardware and parts for assembling the IKEA HÅLLBAR furniture frame.
Tools Required:
- Screwdriver with cross-head bit ✛
- Screwdriver with flat-head bit ⎓
Safety Precautions:
Do not stand on the assembled frame ❌. Do not use the frame as a ladder ❌.
Need Help?
If you encounter difficulties during assembly, please consult the instructions or contact IKEA for assistance ?.
Hardware and Parts:
Key Dimensions:
Measurements indicated for reference: 27 mm, 30 mm, 32 mm.
Step 1: Assemble Main Frame
Connect the side rails to the end pieces of the frame. The diagram shows components locking into place with an audible 'click' [click].
Visual description: Four connection points are shown where frame sides join end sections, forming a rectangular base.
Step 2: Insert Crossbars
Place the two crossbars into the assembled main frame.
Visual description: Two horizontal bars are positioned within the rectangular frame structure, running parallel to the side rails.
Step 3: Secure Main Frame
Use four screws (4x 107399) to secure the main frame components together.
Visual description: Screws are inserted into pre-drilled holes at key junctions to fasten the frame structure.
Step 4: Attach Side Panels
Attach the side panels or supports to the frame. This step involves securing these panels using screws.
Visual description: Side panels are affixed to the main frame structure. Diagrams reference specific measurements (27mm, 30mm, 32mm) for alignment.
Step 5a: Attach Brackets (Type 1)
Attach the first type of brackets to the frame using two screws (2x 109049) for each bracket.
Visual description: Brackets are mounted onto the frame, secured by screws into designated holes.
Step 5b: Attach Brackets (Type 2)
Attach the second type of brackets to the frame using two screws (2x 100325) for each bracket.
Visual description: A different set of brackets is mounted onto the frame, secured by screws into designated holes.
Step 6: Attach Vertical Supports
Attach the vertical supports to the frame. The diagram indicates these parts lock into place with a 'click' [click].
Visual description: Two vertical elements are attached to the sides of the frame, likely for stability or further attachment points.
Step 7: Place Top Frame
Position the top frame onto the assembled structure.
Visual description: The uppermost frame component is placed on top of the assembled unit, completing the basic structure.
Final Information
An information icon ⓘ is displayed, typically indicating a final check or important note regarding the assembly.
Copyright © Inter IKEA Systems B.V. 2019. Document Reference: AA-2161775-4. Last Updated: 2025-01-22.
