Blaupunkt IRVINE 140: In-Car Multi-Media Player with Bluetooth & Radio Receiver

Product Overview

The Blaupunkt IRVINE 140 is an in-car multi-media player featuring Bluetooth connectivity and a radio receiver. It is designed to enhance your driving experience with versatile audio playback options.

Manufacturer: BP Americas Corp.

Address: 9590 NW 40 St. Road Doral FL33178

Website: www.blaupunkt.com

⚠️ WARNING: Cancer and Reproductive Harm. For more information, visit www.P65Warnings.ca.gov.

Warranty: 1 year from date of purchase (90 days on labor only).

Basic Functions

Power ON/OFF: Press the power button to turn the unit on or off.

Mode Selection: Press the [MODE] button repeatedly to cycle through available operation modes: RADIO, DISC, USB, SD, AUX, and BLUETOOTH (BT).

Bluetooth Mode: In Bluetooth mode, the [MODE] button can also be used to end an incoming call.

Radio Mode

Seek Stations: Press and hold the [BND] button (or equivalent seek button) to search for stations in descending order. Press once to automatically surf stations in descending order.
Ascending Stations: Press and hold the [BND] button (or equivalent seek button) to search for stations in ascending order. Press once to automatically surf stations in ascending order.
Band Selection: Press the [BAND] button to cycle through FM bands (FM1, FM2, FM3).
Answering Calls: In Bluetooth mode, press the [BAND] button to answer incoming calls.
Preset Memory Stations (1-6): Briefly press preset buttons 1 through 6 to cycle through each programmed station for 5 seconds. To automatically seek and memorize stations, press and hold the [APS] button for 2 seconds. The unit will then assign discovered stations to keys M1-M6.

CD/USB/SD Mode

Previous Track / Rewind: Press the [TRACK] button (or equivalent previous button) to go back to the last track. Press and hold to rewind the current track.
Next Track / Fast-Forward: Press the [TRACK] button (or equivalent next button) to skip to the next track. Press and hold to fast-forward the current track.
Pause/Play: Press the [PAUSE/PLAY] button to pause, play, or resume audio playback. Turning the volume knob will also resume playback.
Browse/Key Number 2: Press the browse button to play 10-second clips of each song. In Radio Mode, press to select the preset station assigned to key number 2.
Repeat/Key Number 3: Press the repeat button to repeat a single song. Press repeatedly to toggle through repeat options. In Radio Mode, press to select the preset station assigned to key number 3.
Random Play/Key Number 4: Press the random play button to shuffle through tracks. In Radio Mode, press to select the preset station assigned to key number 4.
D-/Key Number 5: In CD/USB/SD Mode, press the [D-] button to display the previous folder (if available). In Radio Mode, press to select the preset station assigned to key number 5.
D+/Key Number 6: In CD/USB/SD Mode, press the [D+] button to display the previous folder (if available). In Radio Mode, press to select the preset station assigned to key number 6.

USB/SD Card Playback

Insert a USB or SD card into its respective port. Media will automatically begin to play. If Auto Play does not start, press the [MODE] button to select the USB/SD Card Playback Mode. Supports max USB/SD cards up to 16 GB.

Bluetooth Pairing

Enable Bluetooth on your device.
Scan for available devices.
Select "IRVINE 140" or a similar name when it appears on your device.
Enter the code "0000" when prompted.

Other Functions

SEL (Tone Adjustment)/Volume Control: Increase volume by turning the volume knob to the right. Press [SEL] repeatedly to access settings for Bass (BAS), Treble (TRE), Balance (BAL), Fader (FAD), Loudness (LOUD ON/OFF), Preset EQ (POP, ROCK, CLASSIC, EQ OFF), Local & Distant (LOCAL/DX), and Stereo & Mono (STEREO/MONO). Audio settings can also be adjusted using the volume knob.
LCD Display: Shows the status of the current operation.
Muting Control: Press the [MUTE] button (represented by a speaker icon with a line through it) to turn sound muting on or off.
EQ (Equalization): Press the [EQ] button repeatedly to select the desired preset equalization mode.
Clock Display & Adjustment: Press [DISP] to recall the time display. To set the clock, press and hold [DISP] until the hour digits blink. Use the volume knob ([VOL+/-]) to adjust the hour, then press [SEL/MENU] to confirm. The minute digits will then blink; use the volume knob to adjust the minute, and press [DISP] again to resume normal time display.

Remote Control Key Guide

The remote control provides access to most of the unit's functions.

Battery Replacement: Refer to the back of the remote handset for battery replacement instructions. Use only the same or equivalent type of battery.

Battery Disposal: Dispose of batteries responsibly, following environmental guidelines. Do not expose batteries to excessive heat or fire, as this may cause an explosion.

Remote Handset - General Operation

Power: Press to turn the unit on or off.
Mode Selection: Press repeatedly to select the desired mode.
Volume Control: Press [VOL+] / [VOL-] to adjust the volume level.
Mute Control: Press to turn sound mute on or off.
Audio Control & Function Selector: Press [SEL/MENU] repeatedly to cycle through audio and function control modes (Volume, Bass, Treble, Balance, Fader, Loudness, Preset EQ, Local/Distant, Stereo/Mono). Use [VOL+/-] to adjust settings. (Local/Distant and Stereo/Mono are available in FM radio mode).
Preset Equalization Control: Press [EQ] repeatedly to select the desired preset equalization mode.
Loudness Control: Press and hold [LOUD] to turn loudness control on or off.
Clock Display & Adjustment: Press [DISP] to view the time. Press and hold [DISP] to enter clock setting mode. Adjust hours and minutes using [VOL+/-] and confirm with [SEL/MENU]. Press [DISP] again to exit setting mode.

The remote handset features a numeric keypad (0-9), function buttons like MODE, CLR, APS, VOL+/-, SEL, MENU, EQ, DISP, LOUD, BAND, SRC, TRACK, and directional buttons.

Troubleshooting

Problem	Cause	Solution
Unit will not turn on (no power)	Yellow wire is not connected or is the incorrect voltage. Red wire is not connected or is the incorrect voltage. Black wire is not connected. Fuse is blown.	Check connections for proper voltage (11-14.4VDC). Check the connection to the ground. Replace the fuse.
Unit has Power (but no sound)	Speaker wires are not connected. One or more speaker wires are touching each other, or they are touching the chassis ground.	Check the connections at the speakers. Insulate all bare speaker wires from each other and the chassis ground.
Unit blows fuses	Yellow or red wire is touching the chassis ground. Speaker wires are touching the chassis ground. The rating of the fuse is incorrect.	Check for a pinched wire. Check for a pinched wire. Use a fuse with the correct rating.
Excessive skipping	The unit is not mounted correctly, or the backstrap is not secure.	Check the mounting sleeve and the backstrap support.

NOTE: This equipment has been tested and found to comply with the limits for a Class B digital device, pursuant to Part 15 of the FCC Rules. These limits are designed to provide reasonable protection against harmful interference in a residential installation. This equipment generates, uses, and can radiate radio frequency energy and, if not installed and used in accordance with the instructions, may cause harmful interference to radio communications. However, there is no guarantee that interference will not occur in a particular installation. If this equipment does cause harmful interference to radio or television reception, which can be determined by turning the equipment off and on, the user is encouraged to try to correct the interference by one or more of the following measures:

Reorient or relocate the receiving antenna.
Increase the separation between the equipment and receiver.
Connect the equipment into an outlet on a circuit different from that to which the receiver is connected.
Consult the dealer or an experienced radio/TV technician for help.

Specifications

System Parameters

Working Voltage: DC 10.8V-14.8V
Working Current: MAX 10A
Memory Current: <10mA
Working Temperature: -20°F to +20°F
Storage Temperature: -30°F to +80°F

Audio Parameters

Sound Non-balance: ≤2dB
Channel Separation: ≥ 56dB
Frequency Response: 20Hz-20KHz(±3dB)

Radio Parameters

Frequency Range: FM: 87.50MHz ~ 107.9 MHz, AM: 530KHz ~ 1710KHz
Storage Number: FM: 18 Radio Stations, AM: 12 Radio Stations
Search Method: Manual/Auto

Amplifier Parameters

Test Voltage: 14.4V
Power Output: 4 x 30W
Speaker Impedance: 4-8Ω

Wiring Diagram

The unit features two main wiring harness connectors, labeled A and B.

Connector A (15A-):

A1-3: No connection
A4: Battery direct connection for memory, +12V (Yellow wire)
A5: Remote only for motor car antenna (Blue wire)
A6: No connection
A7: Ignition switch, +12V (Red wire)
A8: Battery/Chassis GND (Black wire)

Connector B:

B1: Speaker out Right Rear+ (Purple wire)
B2: Speaker out Right Rear- (Purple/Black wire)
B3: Speaker out Right Front+ (Gray wire)
B4: Speaker out Right Front- (Gray/Black wire)
B5: Speaker out Left Front+ (White wire)
B6: Speaker out Left Front- (White/Black wire)
B7: Speaker out Left Rear+ (Green wire)
B8: Speaker out Left Rear- (Green/Black wire)

Additionally, the unit has:

Radio antenna input: Standard connector for antenna.
Left audio output: (White connector)
Right audio output: (Red connector)
Subwoofer output: (Green connector)
MIC: External microphone jack.

Application to Control the Unit via Bluetooth of Mobile Phone

Users can download the "EwayLink" application to their mobile phone to control the main unit via Bluetooth.

For Android devices: Search for "ewaylink" on the Play Store, download, and install.

For iOS devices: Search for "ewaylink" on the App Store, download, and install.

After installation, open the "EwayLink" application. Ensure Bluetooth is connected to the car unit.

The mobile application interface provides control over various functions:

Settings Menu: For Bluetooth setup and connection.
Exit Application: To close the app.
Operation Mode Selection: To choose between modes like Radio, USB, etc.
Audio Settings: Adjust bass, treble, balance, and fader.
Mute Control: Turn sound mute on or off.
Volume Control: Slide to set the sound output level.
Playback Control: Playback and pause control.
Track/Channel Selection: Shift track/channel up/down.
Radio Band Selection: Select radio bands.
Display: Shows the current operating mode and playback details.

Remarks: The operation via this application is limited to certain modes and controls.

	Blaupunkt CARMEL 140: In-Car Multi-Media Player & Radio Receiver User Guide Discover the features and functions of the Blaupunkt CARMEL 140 in-car multi-media player. This guide covers Bluetooth, radio, USB/SD playback, and mobile app control for your vehicle's audio system.
	Blaupunkt Daytona 140 USB Media Player Operating Instructions Comprehensive operating instructions for the Blaupunkt Daytona 140 USB Media Player, covering installation, operation, features like radio, USB, SD card, and Bluetooth, along with troubleshooting tips.
	Blaupunkt Philadelphia 835 Multimedia Navigation Operating Instructions Comprehensive operating instructions for the Blaupunkt Philadelphia 835 multimedia navigation system, covering device and remote controls, safety information, radio operation, navigation features, media playback (DVD, CD, USB, SDHC, iPod/iPhone), Bluetooth connectivity, sound settings, basic system configurations, and useful information.
	Blaupunkt Car Multimedia Series 330 Operating Instructions This document provides operating instructions for the Blaupunkt Car Multimedia Series 330. It covers device controls, remote control functions, radio mode, USB/microSDHC media playback, Bluetooth mode, external audio/video sources, external monitor, and sound/basic settings.
	Blaupunkt Salto 4011 Car Radio User Manual and Installation Guide Comprehensive guide for the Blaupunkt Salto 4011 car radio, covering installation, operation, features like radio, disc, USB, SD, AUX, and Bluetooth, along with troubleshooting and technical specifications.
	Blaupunkt Heidelberg CD50 Car Radio/CD Player Operating and Installation Manual Comprehensive operating and installation manual for the Blaupunkt Heidelberg CD50 car audio system, covering radio, CD player, CD changer, volume, tone, equalizer, clock, and installation procedures.
	Blaupunkt Dakota BP800PLAY Car Multimedia System User Manual Comprehensive user manual for the Blaupunkt Dakota BP800PLAY car multimedia system, detailing installation, operation, radio functions, media playback (USB/microSDHC), Bluetooth connectivity, Apple CarPlay, Android Auto, sound settings, basic configurations, and warranty information.
	Blaupunkt Dakota DJ50, Modena CD50, Sylt CD50 Car Audio System Operating Instructions Comprehensive operating instructions for the Blaupunkt Dakota DJ50, Modena CD50, and Sylt CD50 car audio systems. This guide covers installation, operation of radio, CD player, and CD changer functions, audio settings, clock, and specifications.