Moticam X4 Quick Start Guide

Introduction

Thank you for purchasing this Moticam. This camera is a delicate instrument and should be handled with care. When not in use, please store the camera in a safe place with the dust cap attached. Do not let the camera get in contact with water or expose it to extreme temperatures (below 0 or above 50 degrees Celsius). To receive the highest level of service, please retain your receipt as proof of purchase and register your camera online at www.motic.com today.

Should you have any questions, please do not hesitate to contact our customer service.

Included Parts

• A: Moticam Case: The main housing for the Moticam camera.
• B: Dust Cap: A protective cap to cover the lens when the camera is not in use.
• C: C-Ring: An adapter ring, potentially used between the camera and a C-mount adapter for microscope attachment.
• D: Focusable Lens: A lens that allows for manual focusing of the camera's image.
• E: Eyepiece Adapter (2): Adapters designed to fit the Moticam camera onto microscope eyepieces.
• F: USB Cable and Charger: Used to power the Moticam camera.
• G: Calibration Slide: A slide used for calibrating measurement functions within the imaging software.
• H: Macro Tube: A component used to facilitate macro photography or close-up imaging.
• I: Motic Images Plus Application CD: Contains the software for viewing, capturing, and analyzing images from the Moticam.

How to Use Your Moticam X4

Using the Camera on an Eyepiece

Diagram shows the Moticam X4 camera (A) with focusable lens (D) and eyepiece adapter (E) attached, being mounted onto a microscope eyepiece.

1. Remove the Dust Cap (B) from the camera (A) and attach the focusable lens (D).
2. Choose the right size eyepiece adapter (E) and attach this to the focusable lens.
3. Attach this assembly to your microscope's eyepiece by tightening the centering screws on the eyepiece adapter.
4. Connect the USB power supply to the camera. When the light on the camera is on, it means the camera is working and transmitting images, and you can connect to it through WiFi.
5. Connect to the Moticam X4 WiFi signal. Please see the instructions on page 11.

Using the Camera as a Macro Camera

Diagram shows the Moticam X4 camera (A) with focusable lens (D) and macro tube (H) attached, ready to be placed over an object for close-up viewing.

1. Remove the Dust Cap (B) from the camera (A) and attach the focusable lens (D).
2. Attach the Macro Tube (H) onto the lens.
3. Place this assembly over the item you wish to view and ensure there is adequate lighting. If necessary, a desk lamp is a good solution.
4. Connect the USB power supply to the camera. When the light on the camera is on, it means the camera is working and transmitting images, and you can connect to it through WiFi.
5. Connect to the Moticam X4 WiFi signal. Please see the instructions on page 11.

Using the Camera on a Trinocular Microscope

Diagram illustrates the Moticam X4 camera (A) with a C-Mount adapter attached, being connected to the trinocular port of a microscope. The C-Ring (C) may be shown as an intermediary part.

1. Remove the Dust Cap (B) from the camera (A) and attach the microscope's C-Mount adapter. Note: The C-Mount adapter is specific to your microscope. For Motic microscopes, consult the relevant Motic Accessory list and choose an appropriate adapter for your Moticam. Depending on the type of adapter and microscope, the C-Ring (C) may be necessary between the camera and the C-mount adapter.
2. Connect the USB power supply to the camera. When the light on the camera is on, it means the camera is working and transmitting images, and you can connect to it through WiFi.
3. Connect to the Moticam X4 WiFi signal. Please see the instructions on page 11.

Connecting and Using with Devices

Connecting to the Moticam X4 WiFi Signal

1. Each Moticam X4 transmits its own WiFi signal to which you can directly connect your WiFi Device.
2. The Moticam X's SSID signal name is printed on a label on the camera. To log into your camera, simply connect your WiFi device to that signal. The password for the network by default is 12345678.

Using with Android or iOS Devices

For best performance, it is recommended to use WiFi devices, such as tablets, with a screen not smaller than 7 inches. For iOS devices, use iOS 5 or higher. For Android devices, use Version 4.0 or higher.

1. To operate and use the camera on your tablet, download the free App called MotiConnect. For iPad, find it on the AppStore. For Android devices, find it on Google Play.
2. You can also use certain web browsers such as Chrome, Firefox, or Safari to view, measure, and capture without the need for the App. To view the camera stream on your browser, type in the IP number shown on the camera's label (e.g., 192.168.1.151). In your browser, type 192.168.1.151:8080 to connect directly to the camera.
3. The camera supports both MJPG and H.264 output. By default, the camera is set to H.264 for fast FPS transmission to the MotiConnect App. To view the live image on both MotiConnect and a Web browser, change the output mode to MJPG in the MotiConnect App settings.

Using with a WiFi-Enabled Computer

The Moticam X4 can also be used with the Motic Images Plus software for computers. If you have a WiFi-enabled laptop, go to www.motic.com and download the Motic Images Plus 3.0ML software by registering as a user with the DM serial number found on the box.

To view the camera in the product's MI Devices interface:

1. Connect your computer to the Moticam X's WiFi signal.
2. Enter the password.
3. Open the MI Devices interface by clicking the camera icon within Motic Images Plus.
4. Select Moticam X4 from the drop-down menu and click Open.