Contixo R3 Smart Puppy User Manual
Please read this manual before using. Please retain this information for future reference.
R3 Smart Puppy Setup
The R3 Smart Puppy requires 4 x AA batteries.
To interact with the puppy, touch its mouth. The power button is located on the puppy.
*If actions are performed incorrectly, place R3 in an upright position.
Remote Setup
The remote control requires 2 x AAA batteries.
Remote Functions:
- Toggle Voice Control
- Show all Actions
- Enter Programming Mode: Select other action buttons and press this button again to playback selected actions in sequence.
R3 Puppy Smart Commands
Voice Instructions:
- Sing a Song
- Stand at Attention
- Sit Down
- Handstand
- Lean Over
- Say Hello
- Push-ups
Button Commands:
- Show All Functions
- Go Forward
- Stop [pause-symbol]
- Stand at Attention [standing-figure]
- Increase Volume [+]
- Decrease Volume [-]
- Handstand [handstand-figure]
- Push-ups [pushup-figure]
- Music 1 [music-note-1]
- Music 2 [music-note-2]
- Music 3 [music-note-3]
- Sit Down [sitting-figure]
- Say Hello [waving-figure]
- Touch [hand-touching-figure]
- Crouch Down [crouching-figure]
- Wrath [angry-face-figure]
- Sitting and Standing [sitting-standing-figure]
- Enter Programming Mode/Run Program [gear-figure]
*After 80 seconds without operation, R3 will go into sleep mode.
Contact Information
E-Mail: support@contixo.com
Website: www.contixo.com
©2021 Contixo Inc. All rights reserved. Contixo®, the Contixo logo and associated characters, trademarks and design elements are owned and licensed by Contixo Company.
