ACTIVESHOP Azzurro F18 Nail Dust Collector
User Manual
Product Information
This document provides user instructions for the ACTIVESHOP Azzurro F18 nail dust collector, designed for use in pedicure treatments.
Importer: ACTIVESHOP Sp.z o.o.
ul. Graniczna 8b, bud DC
2A 54-610 Wrocław, Poland
Website: www.activeshop.com.pl
Revision: A/05/2024
CE Mark ? (Conformity mark indicating compliance with EU regulations)
Dimensions
The device has the following approximate dimensions:
- Top View: Width 190 mm, Height 300 mm
- Side View: Depth 65 mm, Height of absorber attachment 64 mm
[Diagram Description: A technical drawing showing the top and side views of the nail dust collector with dimensions indicated.]
Parts and Operation
Key Components:
- Vrečka: The dust collection bag.
- Pritrditev absorberja: The absorber attachment mechanism.
- Gumb: The knob used to secure the absorber attachment.
[Diagram Description: An illustration showing the dust collector with labels pointing to the dust bag, the absorber attachment, and the securing knob.]
Assembly and Operation:
- Release the knob (Gumb) and insert the square absorber tube into the fitting (Pritrditev absorberja).
- Tighten the knob to secure the attachment.
- Press the switch button to start the fan.
- Press the switch again to stop the fan.
Safety Measures
General Safety:
- This device is professional equipment intended for use in cosmetic salons by trained personnel to avoid adverse effects during treatments.
- Do not disassemble or use the device for purposes other than those specified in this manual. All maintenance and repair work must be performed by an authorized service provider (ACTIVESHOP Sp. z o.o.).
- Do not install or operate the device near liquids, in wet areas, or with wet hands to prevent liquid ingress.
- In the following cases, immediately unplug the device and contact authorized service:
- (a) Liquid has entered the device.
- (b) The device emits an unusual smell, smoke, or strange noises.
- (c) The power cord is damaged.
- (d) The device has tipped over or its casing is damaged.
- Do not place any objects on the cables. Ensure the device is not placed where the power cable can be stepped on.
- For safety, unplug the power cord from the outlet each time you finish working with the unit.
- Do not insert anything into the device's openings. If a foreign object enters an opening, unplug the device and contact the distributor or manufacturer.
- Do not place the device on an unstable trolley, shelf, or vehicle, as it may be damaged if it falls.
- To ensure a stable lifespan for the device, it is recommended to wait one minute between power on/off cycles (when switching between on and off, or vice versa).
- The power supply must meet the specifications on the rating plate. Failure to do so may result in device malfunction, damage, or burnout.
Cautionary Notes:
- In case of damage to the power cord or other faults, contact an authorized service center to avoid hazards.
- This device may be used by children aged 8 years and older, and by persons with reduced physical, sensory, or mental capabilities or lack of experience and knowledge, provided they are supervised or have received instruction on safe use and understand the associated risks.
- The equipment is not intended for children's play. Do not allow children to play with the device.
- Do not leave the device unattended when children or persons without adequate knowledge of its use are nearby.
- This electrical appliance is not a toy. Improper use or contact with the electrical appliance can endanger health or cause death. Therefore, the device must be used and stored out of reach of children.
Disposal of the Device
Used electrical devices, wiring, and packaging should be disposed of at recycling centers in accordance with environmental protection principles. Electrical devices must not be disposed of in household waste bins. Follow the regulations for the disposal of such equipment.
To protect the environment, in accordance with Directive 2012/19/ES on waste electrical and electronic equipment, electrical equipment must be collected separately and handed over at collection points for used electrical and electronic equipment.
Used and old appliances contain components that can be fully recycled, so they must be submitted for recycling. They should be handed over at appropriate collection points or to ACTIVESHOP Ltd.
[Symbol Description: A crossed-out wheeled bin ?️, indicating that the product should not be disposed of with regular household waste.]
Storage and Transport
The device must be transported at temperatures between -20 °C and +50 °C, only in its original packaging.
Store the device in a well-ventilated area with a relative humidity not exceeding 75%.
Operating temperature range: +10 °C to +40 °C.
During storage and transport, do not throw, drop, or expose the device to mechanical impacts or atmospheric factors.
