Product Overview
The Azzurro F-18A is a professional-grade dust absorber designed for use in beauty salons and pedicure environments. Its primary function is to capture dust and particles generated during pedicure treatments, ensuring a cleaner and healthier working environment.
The bag design allows it to be attached to the leg rest or directly to the treatment chair.
Technical Specifications
Specification | Value |
---|---|
Rated Voltage | 220-240 V, 50/60 Hz |
Power Consumption | 38 W |
Turbine Speed | 2800/3200 RPM |
Filtered Airflow | 345/406 m³ per hour |
Noise Level | 51/58 dB |
Dimensions (Internal) | 13.5 cm |
Dimensions (External) | 19 cm |
Usage Instructions
The shock absorber construction allows the unit to be attached to the leg rest or directly to the treatment chair.
To operate the device:
- Press the switch button once to start the fan.
- Press the switch button again to stop the fan.
Safety Measures
This is a professional device intended for use in beauty salons by qualified personnel. Improper use can lead to undesirable effects or hazards.
- Do not disassemble or attempt to use the device for purposes other than those specified in this manual. All maintenance and repairs must be performed by authorized ACTIVESHOP Sp. z o.o. service technicians.
- Do not install or use the device near liquids, in damp areas, or with wet hands to prevent liquid ingress.
- In case of liquid ingress, strange smells, smoke, unusual noises, a damaged power cord, or if the device is overturned or damaged, immediately disconnect it from the power outlet and contact authorized service.
- Do not place any objects on the cables. Ensure the device is not placed where the power cable can be tripped over.
- For safety, unplug the power cord from the outlet when not in use.
- Do not insert any objects into the device's openings. If a foreign object enters an opening, unplug the device and contact the distributor or manufacturer.
- Do not place the device on unstable trolleys, shelves, or vehicles, as it may fall and be damaged.
- To ensure a stable service life, it is recommended to wait one minute between switching the device on and off, or vice versa.
- Ensure the power supply matches the specifications on the data plate. Failure to do so may result in malfunctions, damage, or fire.
Important Warnings:
- If the power cord is damaged or other malfunctions occur, contact an authorized service center to avoid danger.
- This device may be used by children aged 8 years and above, and by persons with reduced physical or mental capabilities, or lack of experience and knowledge, provided they are supervised or have received instruction on safe use and understand the associated risks.
- The equipment is not intended for play by children. Do not allow children to play with the device.
- Do not leave the device unattended if children or persons unfamiliar with its operation are nearby.
- This electrical device is not a toy. Improper use or contact can endanger health or lead to death. Therefore, the device must be used and stored out of reach of children.
Device Disposal
Dispose of used electrical devices, accessories, and packaging at recycling centers in accordance with environmental protection principles. Electrical devices must not be disposed of in household waste bins. Comply with regulations for the disposal of such equipment. To protect the environment, as per Directive 2012/19/EK on waste electrical and electronic equipment, used electrical equipment must be collected separately and handed over to collection points for waste electronic and electrical equipment.
Used and old devices contain fully recyclable components and must be submitted for recycling. Therefore, they should be handed over to appropriate collection points, as well as to ACTIVESHOP.
Storage and Transportation
The device must be transported at temperatures between -20 °C and +50 °C, only in its original packaging. Store the device in a well-ventilated room where relative humidity does not exceed 75 %. The operating temperature range is from +10 °C to +40 °C. During storage and transportation, the device must not be thrown, dropped, subjected to mechanical shocks, or atmospheric influences.