ACTIVESHOP Azzurro F18 Pedicure Dust Collector User Manual
Model: Azzurro F18
Importer: ACTIVESHOP Sp. z o.o., ul. Graniczna 8b, bud DC 2A 54-610 Wrocław, Poland | www.activeshop.com.pl | Rev. A/05/2024
Product Overview
The ACTIVESHOP Azzurro F18 is a professional-grade dust collector designed for use in beauty salons. It is intended for use by qualified cosmetic personnel to ensure safe and effective operation during pedicure procedures.
Dimensions and Components
Diagram 1: Front View
Width: 190 mm
Height: 300 mm
Depth: 65 mm
Diagram 2: Side View
Depth: 64 mm
Key Components:
- Dust Bag (Maisiņš)
- Mounting Bracket (Absorbenta stiprinājums)
- Handle (Rokturis)
Operation Instructions
To set up the dust collector:
- Release the knob on the mounting bracket.
- Insert the square tube of the dust absorber into the bracket.
- Tighten the knob to secure the tube.
To operate the fan:
- Press the switch button to start the fan.
- Press the switch button again to stop the fan.
Safety Precautions
- This device is professional equipment for beauty salons and should only be operated by qualified cosmetic personnel to prevent undesirable consequences during procedures.
- Do not disassemble or use the device for purposes other than those specified in this manual. All maintenance and repairs must be performed by an authorized ACTIVESHOP service technician.
- Do not install or use the device near liquids, in damp areas, or with wet hands to prevent liquids from entering the device.
- In case of liquid ingress, strange smells, smoke, unusual noises, damaged power cord, or if the device has tipped over or its casing is damaged, immediately disconnect from the power outlet and contact an authorized ACTIVESHOP service center.
- Do not place objects on the cables. Ensure the device is not placed where the power cable can be stepped on.
- For safety, always disconnect the power cord from the socket when finished using the device.
- Do not insert anything into the device's openings. If a foreign object enters an opening, unplug the device and contact the distributor or manufacturer.
- Do not place the device on unstable trolleys, shelves, or vehicles, as it may be damaged if it falls.
- To ensure the device's longevity, allow a one-minute interval between switching the power button on and off.
- Ensure the power source complies with the specifications on the data plate. Non-compliance may lead to incorrect functioning, damage, or burnout.
Important Notes:
- If the power cord is damaged or other malfunctions occur, contact the authorized service center to avoid danger.
- This device can be used by children aged 8 and above, and by persons with reduced physical or mental capabilities, or lack of experience and knowledge, provided they are supervised or have received instructions on safe use and understand the risks.
- The equipment is not a toy. Do not allow children to play with the device.
- Do not leave the device unattended if children or persons unfamiliar with its operation are nearby.
- This electrical device is not a toy. Incorrect use or contact can endanger health or cause death. Use and store the device in a location inaccessible to children.
Device Disposal
Dispose of used electrical devices, accessories, and packaging at recycling centers in accordance with environmental protection principles. Electrical devices must not be disposed of in household waste containers. Follow the regulations for the disposal of such equipment.
To protect the environment, in accordance with Directive 2012/19/EU on waste electrical and electronic equipment (WEEE), used electrical devices must be collected separately and handed over to collection points for waste electronic and electrical equipment.
Used and old devices contain fully recyclable components and must be handed over for recycling. Therefore, they should be delivered to the appropriate collection points or to ACTIVESHOP.
Storage and Transportation
The device must be transported in its original packaging within a temperature range of -20 °C to +50 °C. Store the device in a well-ventilated room with relative humidity not exceeding 75%. The operating temperature range is +10 °C to +40 °C. During storage and transportation, do not throw, drop, subject the device to mechanical shock, or expose it to atmospheric effects.