HYTOBP P17 PRO Drone

Prohibited Operations

To comply with aeronautical radio station electromagnetic environmental requirements, this product prohibits the use of model remote controls and drones within 10 kilometers on either side of the runway centerline and 15 kilometers at both ends of the runway, as well as along civil aviation routes. Additionally, cease use of model remote controls and drones when national competent authorities issue radio control orders or within designated regions.

Disclaimer and Safety Instructions

Read all content in this manual carefully before use and save it for future reference to ensure comfortable and safe operation.

Disclaimer

• Read the instructions, disclaimers, and safety instructions provided with this product before use to protect your rights and interests.
• This product is not suitable for individuals under 14 years of age. Those under 14 should use it under the supervision and guidance of experienced adults.
• By using this product, users acknowledge and accept all terms and content of the product manual, disclaimer, and safety instructions.
• Users must strictly adhere to the instructions and safety guidelines. HYTOBP is not liable for any personal injury, accidents, property damage, legal disputes, or adverse events resulting from violations of safety instructions or uncontrollable factors.
• HYTOBP is not responsible for any direct or indirect violations of laws and regulations resulting from the use of this product.

Safety Instructions

• This product is not suitable for individuals under 14 years of age or those lacking full civil capacity.
• Due to its high-speed rotating propeller and powerful flight capabilities, this product carries risks during operation. Do not approach or touch the product while it is running.
• Avoid flying near airports, railways, highways, skyscrapers, and power lines.
• Stay away from environments with high electromagnetic interference, such as mobile phone base stations and high-power transmission devices.
• Do not fly near manned aircraft.
• Do not use this product in adverse conditions such as rain, lightning, dust, fog, snow, strong winds, or low temperatures.
• The product is not waterproof; do not use it near water.
• Maintain a safe distance of approximately 10 meters between the drone and humans or animals.
• Ensure the drone flies within the operator's visual range.
• Do not hover or fly over crowds, and avoid startling others.
• Do not use the product near areas where children are playing.
• Do not use the product to chase or interfere with normal transportation operations.
• In non-emergency situations, do not shut down the motor while the product is in the air.
• Users must not operate this product under the influence of alcohol, fatigue, medication, or physical discomfort.
• Before each use, inspect the product for component firmness, body and propeller cracks/wear, battery level, and indicator light effectiveness. If anomalies are found, stop use immediately and replace parts.
• Do not attempt to block moving parts during operation.
• Do not modify the product or use it for purposes other than its original design.
• Do not use the product in areas prohibited by laws and regulations.
• High temperatures can damage the drone's internal structure; keep drone equipment away from heat sources and avoid prolonged direct sunlight.
• Follow the product manual for operation.
• Use original parts for maintenance and replacement.
• If lending the product to others, ensure they understand and comply with this safety information.
• Do not mix different types of batteries.
• Do not use swollen, leaking, or damaged batteries.
• When charging batteries, keep away from flammable materials like blankets, solid wood furniture, and wooden boards.
• Use the original factory-configured charging cable. Do not use other brands or damaged cables.
• Maintain a safe distance from high-speed rotating propellers to avoid entanglement or cutting risks.
• Do not use the model near ears, as improper use can cause hearing damage.
• Keep away from other electrical equipment and magnetic objects to avoid mutual interference.
• Do not short-circuit or squeeze the battery to prevent explosion.
• The motor generates heat; do not touch it to avoid burns.

Charging Precautions

• Lithium batteries pose risks; use them cautiously and assume all responsibilities.
• If a battery leaks, avoid contact with skin and eyes. Wash skin immediately with soap and water. If in eyes, rinse immediately with abundant water and seek medical attention.
• If the charger emits odor, noise, or smoke during charging, disconnect the power immediately.

Charging Instructions

• Use only the dedicated manufacturer's charger. Do not use damaged or third-party chargers.
• Do not charge swollen, leaking, or damaged batteries.
• Do not overcharge the battery. Disconnect the charger once fully charged.
• Do not charge near flammable materials (carpets, wood floors, furniture) or conductive surfaces. Keep the battery within sight range during charging.
• Allow the battery to cool for 10-15 minutes after use before charging.
• Battery temperature during charging should be between 0°C and 40°C.

Recycling

Dispose of electronic waste, including this device and its batteries, according to local waste disposal regulations for special treatment.

Product Introduction

Drone Overview

• Elica A (rotazione in senso orario)
• Dispositivo di prevenzione degli ostacoli
• Involucro
• Elica B (rotazione antioraria)
• Motore senza spazzole
• Braccio macchina
• Fotocamera
• Treppiede

Remote Control Overview

• Portacellulare
• Telecamera su / Telecamera giù
• Display LCD: Segnale GPS, Livello batteria del drone, Numero di satelliti GPS, Livello batteria del telecomando
• Interruttore GPS
• Cambio di marcia (Marcia ad alta velocità / Marcia bassa)
• Altezza, Foto, Video, Distanza
• Leva di comando sinistra (controlla altitudine e movimento laterale)
• Leva di comando destra (controlla direzione avanti/indietro e sinistra/destra)
• Pressione breve (Leva sinistra): Correzione del giroscopio
• Pressione prolungata (Leva sinistra): Scattare una foto
• Interruttore di alimentazione
• Pressione breve (Leva destra): Calibrare il geomagnetismo
• Pressione prolungata (Leva destra): Registrazione video

Low Power Prompt: If the remote control power is below 3.8V, a 'Didi' warning sound will play. Do not mix old and new batteries or different battery types. The obstacle avoidance function requires an additional avoidance head and is active only in indoor mode (GPS disabled) after explicit activation.

Charging and Battery Installation

Drone Charging

• Interface A (connect to USB)
• Interface B (connect to lithium battery)

Connect Interface A to a computer's USB and Interface B to the lithium battery. The red light turns off when fully charged. Charging time is approximately 90 minutes. Use the original manufacturer's dedicated charger.

Remote Control Battery Installation

Open the battery cover and insert 4 AA batteries, observing correct polarity (+/-). Do not mix old/new or different battery types.

Mobile Phone Installation

1. Open the phone holder on the remote control.
2. Ensure the phone is installed securely on the holder.

Safe Flight Guide

Recommended Flying Conditions

• Fly in a vast, open area.
• Maintain visual line of sight; drone altitude below 120 meters.
• Ensure a strong GPS signal.
• Avoid flying near crowds, trees, power lines, buildings, airports, or water.
• Avoid high-intensity energy sources or base stations that can affect the compass.
• Do not fly in adverse weather: rain, snow, fog, or wind speeds exceeding 10 m/s (22 mph).
• Prohibited in no-fly zones.
• Maintain distance from rotating propellers and motors.

Preparation Before Takeoff

1. Power On: Press and hold the drone's power switch for more than 2 seconds. The drone will emit a sound, and its front/rear lights will change from fast flashing to slow flashing, indicating successful frequency matching.
2. Geomagnetism Calibration: Briefly press the geomagnetism calibration button on the remote. The remote beeps, and the drone's lights flash regularly. Hold the drone horizontally and rotate it clockwise three times. The remote beeps 'di', and the drone's front green and rear red lights flash slowly, indicating successful horizontal calibration.
3. Gyroscope Calibration: Hold the drone vertically and rotate it clockwise three times. The remote beeps 'di, di', and the drone's front green light stays on while the rear red light flashes, indicating successful vertical calibration. For gyroscope calibration, briefly press the gyroscope button. The remote beeps, and the drone's lights flash rapidly then turn solid.
4. Outdoor Takeoff: The drone automatically searches for GPS signals. At least 7 satellites are required for the rear lights to stay solid and the remote to beep. Unlock the drone by pressing the eight-way unlock button on the remote; motors will start rotating. If drone lights flash, signal interference is present; move to an open area.
5. Indoor Takeoff: Press and hold the 'GPS Switch' on the remote to disable GPS ('OFF' displayed). Briefly press the 'Gyroscope Correction' button. Tilt the left joystick down-left and the right joystick down-right. When all four motors rotate uniformly, the drone is unlocked.

Landing

Descent

Lower the power control stick to descend.

Ascension

Raise the power control stick to ascend.

Left/Right Movement

Use the left stick to move left or right.

Forward/Backward Movement

Use the right stick to move forward or backward.

Function Introduction

Control Stick Functions

• Left Control Stick (Throttle): Controls altitude (Ascend/Descend) and left/right strafing.
• Right Control Stick (Directional): Controls forward/backward movement (Pitch) and left/right turning (Yaw).

GPS Fixed Point

• After frequency synchronization, wait 1-2 minutes in an open area for GPS positioning. The remote will beep, and the drone's lights will stay solid.
• If lights flash, signal interference is present; move to an open area.
• Long-press the 'GPS Switch' to disable GPS for indoor mode ('OFF' displayed).

One-Click Return

Two conditions for one-click return:

• Active Return: Press the return button. The remote beeps continuously, and the drone returns to the takeoff point for landing. The remote beeps for 3 seconds upon completion.
• Automatic Return: If the drone detects low voltage (level 1), lights flash slowly, and it returns to within 20 meters of the takeoff point, landing at approximately 5 meters altitude. It can fly for about 1-2 minutes. If a second low voltage level is detected and the altitude is below 10 meters, the drone automatically ascends 5-10 meters, returns to the takeoff position, lands, and stops flying.

Photo and Video

Press the photo button on the remote or click the 'take photo' icon in the software to capture an image. Press and hold the video button on the remote or click the 'record video' icon to start recording. Photos and videos are saved to the connected phone.

Speed Control

• There are three speed gears.
• Short-press the speed switch button: one 'bip' for slow, two 'bips' for medium, three 'bips' for fast (cycles sequentially). Default is slow gear.

Indicator Lights

• Front Light: Green (normal), Red (warning/error).
• Rear Light: Red (normal), Green (warning/error).
• Power Indicator: Shows battery status.

Troubleshooting

Accessories

• Propeller Guards (Copricapo)
• Lower Shell (Copertura inferiore)
• Fan Blades (Propellers) (Lame ventilatori)
• Machine Arm (Braccio macchina)
• Lithium Batteries (Batterie al litio)
• Motor (Motore)
• Receiver Board (Tavola ricevente)

Note: Images are for reference only; please refer to the actual product.