HOMCOM Rolling Stool with Adjustable Height and Backrest
Model: 921-823V00
Features: Adjustable height, backrest, 360° swivel. Assembly typically takes 6 steps and approximately 1 hour.
Important Safety Information
Intended Use: This product is intended for indoor use only, for work and study.
- Ensure even weight distribution to prevent tipping.
- Remove all parts from the box and verify all parts are included before assembly.
- Keep feet on the floor and do not press head against the headrest when reclining.
- Ensure fingers are safe and out of harm's way when adjusting the backrest.
- Do not pull the stool quickly or forcefully.
- This chair is designed for sitting only. Do not use as a base or ladder.
- Do not sit on the armrests.
- This chair is designed for one person at a time.
- If parts are missing, damaged, or worn, stop using immediately.
- Avoid direct sunlight on the chair to prevent plastic components from becoming brittle.
- Recommended wheels for carpet: rigid nylon wheels or with gears.
- Recommended wheels for hard flooring: PU wheels or rubber wheels (avoid metal wheels to prevent scratching).
- Beware of crushing and cutting hazards during assembly.
- Manufacturer is not responsible for damages due to improper installation or weathering.
Warning: Replacement or repair of height adjustment components with energy storage (e.g., gas lift) must only be performed by qualified personnel.
Maintenance Instructions
- Clean with a vacuum cleaner.
- Wipe with a fabric dampened with water.
Storage Instructions
- Fabric should be stored completely dry in a clean, dry place to prevent mold.
Electrical Parts Information
If the product has electrical parts: This appliance can be used by children aged 8 and above, and persons with reduced physical, sensory, or mental capabilities, or lack of experience and knowledge, if supervised or instructed on safe use and understanding the hazards involved.
- Children should not play with the appliance.
- Cleaning and user maintenance should not be performed by children without supervision.
- Use only with the provided power supply unit.
- The external flexible cable of the transformer cannot be replaced; if damaged, the transformer must be scrapped.
- If the appliance has a heated surface, persons insensitive to heat should be careful.
- Do not use the power supply if the plug pins are damaged.
Parts List
- A: 5 x Casters (Wheels)
- B: 1 x Base (Star-shaped with central column)
- C: 1 x Gas Lift Cylinder
- D: 1 x Seat Plate
- E: 1 x Seat Cushion
- F: 1 x Backrest
- G: 1 x Backrest Support Bracket
Hardware List
- a: 4 x M6*16 screws
- b: 5 x M6*25 screws
- c: 1 x Allen Key
Assembly Instructions
Follow these steps to assemble your stool:
- Step 01: Insert the casters (A) into the base (B). Insert the gas lift cylinder (C) into the center of the base (B).
- Step 02: Attach the seat plate (D) to the underside of the seat cushion (E) using four M6*16 screws (a).
- Step 03: Attach the backrest support bracket (G) to the seat cushion assembly using two M6*25 screws (b). Then, attach the backrest (F) to the bracket (G) using two M6*25 screws (b).
- Step 04: Place the assembled seat and backrest unit onto the gas lift cylinder (C) on the base (B). Secure it from underneath using three M6*25 screws (b).
- Step 05: Adjust the stool's height by pulling the lever located under the seat. The stool is now ready for use.
