HOMCOM Rotating Stool
Model: IN230300151V02_GL
Important Information
This document contains important information regarding the assembly, use, and maintenance of the HOMCOM rotating stool. Please read carefully and retain for future reference. The document is provided in multiple languages, with English serving as the primary reference.
Product Overview
The HOMCOM rotating stool is designed for domestic use. It features adjustable height and a stable base with casters for mobility.
Instructions for Use
- Place the chair stably on a flat floor.
- Keep away from open flames or heat sources.
- Avoid overloading the chair.
Precautions Before Assembly
- Prepare a clean and dry mounting area.
- Verify that the product is not damaged.
- Check that none of the pieces are missing.
Maintenance
- Clean with a soft fabric.
- Regularly check the seating.
Storage Conditions
- The fabric should be stored completely dry, in a clean and dry place to avoid the risks of mold.
Safety Warnings
Beware of crushing and cutting hazards during assembly.
The manufacturer declines all responsibility in case of damages due to bad installation or adverse weather conditions.
Warning! Only trained personnel may replace or repair components for height adjustment of seating furniture with energy storage.
Electrical Parts Warning
This appliance can be used by children aged from 8 years and above and persons with reduced physical, sensory or mental capabilities or lack of experience and knowledge if they have been given supervision or instruction concerning use of the appliance in a safe way and understand the hazards involved.
- Children shall not play with the appliance.
- Cleaning and user maintenance shall not be made by children without supervision.
- The appliance is only to be used with the power supply unit provided with the appliance.
- The external flexible cable or cord of this transformer cannot be replaced; if the cord is damaged, the transformer shall be scrapped.
- If the appliance has a heated surface, persons insensitive to heat must be careful when using the appliance.
- The power supply unit shall not be used if pins of the plug part are damaged. [!]
Parts List
| Part Identifier | Description | Quantity |
|---|---|---|
| A | Caster Wheel | 5 |
| B | Chair Base (Star Base) | 1 |
| C | Seat Cushion | 1 |
| D | Backrest | 1 |
| E | Gas Lift Cylinder | 1 |
| F | Seat Mechanism | 1 |
| G | Backrest Bracket | 1 |
| H | Backrest Mounting Plate | 1 |
| I | Seat Mechanism Bracket | 1 |
| K | Bolt (M6x20mm) | 4 |
| L | Bolt (M8x25mm) | 1 |
| M | Allen Key | 1 |
| N | Bolt (M6x15mm) | 2 |
| O | Washer | 4 |
Assembly Instructions
Step 1: Assemble the Base
Insert the five caster wheels (A) into the holes of the chair base (B). Insert the gas lift cylinder (E) into the center hole of the chair base (B).
Step 2: Attach the Seat Mechanism
Place the seat mechanism (F) onto the underside of the seat cushion (C). Align the holes. Secure the seat mechanism (F) to the seat cushion (C) using four bolts (K) and four washers (O). Tighten with the Allen key (M).
Step 3: Attach the Backrest
Attach the backrest bracket (G) to the backrest (D) using two bolts (N). Then, attach the backrest mounting plate (H) to the backrest bracket (G). Align the seat mechanism bracket (I) with the backrest mounting plate (H) and secure them together.
Step 4: Connect Backrest Assembly to Seat
Attach the assembled backrest unit (D, G, H, I) to the seat mechanism (F) using the bolt (L).
Step 5: Final Assembly
Place the assembled seat and backrest unit onto the gas lift cylinder (E) on the chair base (B). Ensure it is seated securely. Assembly is complete.
Customer Support
For any questions or assistance, please contact the customer care center for your region. Contact details are provided in the original document.
