Product Overview
This document provides assembly instructions and safety information for the HOMCOM bar stool, model 835-586. The product is depicted as a modern bar stool with a padded seat and backrest, adjustable height, and a circular base. The assembly is estimated to take 3 steps and 20 minutes.
Important Information
Important: Retain for future reference. Read carefully.
This product is intended for domestic use only.
Instructions for Use
- Place the chair stably on a flat floor.
- Keep away from open flames and heat sources.
- Avoid overloading the chair.
Precautions Before Assembly
- Prepare a clean and dry mounting area.
- Verify that the product is not damaged.
- Check that none of the pieces are missing.
Maintenance
- Clean with a soft fabric.
- Regularly check the seating.
Storage Conditions
- Fabric should be stored completely dry, in a clean and dry place to avoid the risks of mold.
Safety Warnings
Assembly Hazards: Be aware of crushing and cutting hazards during assembly.
Manufacturer Disclaimer: The manufacturer declines all responsibility in case of damages due to bad installation or environmental factors.
Height Adjustment: Warning! Replacement and repair of components for height adjustment must only be performed by qualified personnel.
Electrical Parts:
- This appliance can be used by children aged 8 years and above, and persons with reduced physical, sensory or mental capabilities or lack of experience and knowledge, if they have been given supervision or instruction concerning use of the appliance in a safe way and understand the hazards involved.
- Children shall not play with the appliance.
- Cleaning and user maintenance shall not be made by children without supervision.
- The appliance is only to be used with the provided power supply unit.
- The external flexible cable or cord of this transformer cannot be replaced; if the cord is damaged, the transformer shall be scrapped. [!]
- If the appliance has a heated surface: Persons insensitive to heat must be careful when using the appliance.
- The power supply unit shall not be used if the pins of the plug part are damaged. [❌]
Parts List
- A: Seat (x1)
- B: Gas Lift (x1)
- C: Base (x1)
- D: Base Plate (x1)
- F: Screws M6*16 (x4 + 1 spare)
- G: Allen Key (x1)
Assembly Instructions
Step 01: Insert the Gas Lift (B) into the Base Plate (D). [⬆️]
Step 02: Attach the Seat (A) to the Gas Lift (B) using the Screws (F) and the Allen Key (G). [✔️]
Assembly is now complete. [✅]
Customer Support
For any questions, please contact the respective customer care center:
- US: 001-877-644-9366, customerservice@aosom.com. Imported by Aosom LLC, USA.
- CA: 416-792-6088, customerservice@aosom.ca. Imported by Aosom Canada Inc., Canada.
- UK: 0044-800-240-4004, enquiries@mhstar.co.uk. Importer: MH STAR UK LTD, UK.
- FR: 0033-1-84166106, aosom@mhfrance.fr. Importé par: MH FRANCE, France.
- DE: 0049-0(40)-87408465, service@aosom.de. Hersteller/REP: MH Handel GmbH, Germany.
- IT: 0039-0249471447, clienti@aosom.it. IMPORTATO DA: AOSOM Italy srl, Italy.
- ES: 0034-931294512, atencioncliente@aosom.es. IMPORTADOR: SPANISH AOSOM, S.L., Spain.
- PT: 0034-931294512, info@aosom.pt. Importador: SPANISH AOSOM, S.L, Portugal.
Please recycle or dispose of packaging responsibly.
