AXSTAD
Assembly Instructions
Product Overview
This document provides assembly instructions for the IKEA AXSTAD door panels. The AXSTAD series offers cabinet doors designed for IKEA's SEKTION kitchen system.
The package includes components for attaching the door panels to a cabinet frame.
Included Door Panel Types:
- One taller door panel
- One shorter door panel
Parts Identification
The following part is required for assembly:
- Part: Connector/Fitting (e.g., cam lock or dowel)
- Quantity: 3x or 4x per panel, depending on the specific installation.
- Part Numbers: 128891, 10042122, 10054810, 10106892
Note: The visual representation of the part suggests it is a connector used to join panels or secure fittings.
Assembly Steps
Step 1: Attach First Door Panel
Begin by preparing the cabinet frame and the first door panel. Insert the connector/fitting (Part Numbers: 128891, 10042122, 10054810, 10106892) into the designated pre-drilled holes on the edge of the cabinet frame or the door panel. The quantity required is typically 3 or 4 units.
Visual Description: The diagram shows the connector being inserted into holes on the side of a cabinet structure, preparing it to receive a door panel.
Step 2: Attach Second Door Panel
Repeat the process for the second door panel. Insert the connector/fitting into the appropriate pre-drilled holes on the cabinet structure. Ensure the correct quantity (3x or 4x) of connectors is used for secure attachment.
Visual Description: The diagram illustrates the second door panel being attached to the cabinet, following the same connection method as the first panel.
