SEKTION Cabinet Assembly Instructions
By IKEA
Important Information & Warnings
WARNING: Serious or fatal crushing injuries can occur from furniture tip-over. To prevent this furniture from tipping over, it must be permanently fixed to the wall/floor.
Fixing devices for the wall/floor are not included as different wall materials require different types of fixing devices. Use fixing devices suitable for the walls/floors in your home. For advice on suitable fixing systems, contact your local specialized dealer.
Safety Recommendations:
- Place heaviest items in the lowest drawers.
- Prevent children from climbing or hanging on the drawers, doors, or shelves.
[warning] Please read all instructions carefully before assembly and keep this information for future reference.
Parts Included
| Part Description | Quantity | Part Identifier (if applicable) |
|---|---|---|
| Cam Lock Screw | 12x | 112996 |
| Cam Lock | 12x | 319503 |
| Wooden Dowel | 8x | 101351 |
| Screw | 8x | 113434 |
| Screw | 6x | 110387 |
| Wall Mounting Bracket | 2x | 124526 |
| Mounting Plate | 4x | 10036383 / 10039201 (2 of each) |
| Back Panel Fasteners (e.g., Nails) | 2x (bag) | 10039571 |
| Hinge Component | 4x | 124518 / 124519 (2 of each) |
| Shelf Support | 4x | 10049278 / 10046940 (2 of each) |
| Shelf | 2x | 10116456 / 10116457 |
| Screw | 4x | 10035574 |
Note: Tools shown include screwdrivers, a hammer, and a clamp. These are not included.
Assembly Steps
Step 1
Insert 12 cam lock screws (112996) into the pre-drilled holes on two long panels.
[Diagram shows hands ?️ inserting screws into panels.]Step 2
Attach two mounting plates (10049278) to the panels using screws (10046940, 2x).
[Diagram shows hands ?️ attaching plates with screws.]Step 3
Insert 6 wooden dowels (101351) into the side panels. Attach the side panels to the base and top panels, aligning with the cam lock screws.
[Diagram shows hands ?️ inserting dowels and connecting panels.]Step 4
Insert and turn 6 cam locks (319503) into the corresponding holes to secure the panels.
[Diagram shows hands ?️ inserting and turning cam locks.]Step 5
Slide the back panel into the grooves on the assembled frame.
[Diagram shows a back panel being slid into place.]Step 6
Join the two cabinet sections or attach a side panel by aligning them and inserting 6 cam lock screws (101351) into the designated holes.
[Diagram shows two people holding cabinet sections and inserting screws.]Step 7
Insert and turn 6 cam locks (319503) to secure the joined sections.
[Diagram shows hands ?️ inserting and turning cam locks.]Step 8
Ensure the cabinet is square (90° angles). Secure the back panel using one screw (319503) in the indicated position.
[Diagram shows a person checking for squareness (90°) with a tool and inserting a screw into the back panel.]Step 9
Secure the back panel further by inserting one screw (319503) into the indicated position.
[Diagram shows a person inserting a screw into the back panel.]Step 10
Secure the back panel with one screw (319503) in the indicated position.
[Diagram shows a person inserting a screw into the back panel.]Step 11
Attach two mounting plates (10036383) to the cabinet using screws (10035574, 2x).
[Diagram shows hands ?️ attaching plates with screws.]Step 12
Secure the cabinet structure by inserting 24 screws (319503) into the designated holes.
[Diagram shows multiple screws being inserted into the cabinet frame.]Step 13
Attach two wall mounting brackets (124526) to the wall at the desired height. Ensure they are level and securely fastened to the wall structure (use appropriate wall fixings, not included).
[Diagram shows hands ?️ attaching brackets to a wall.]Step 14
Attach two mounting plates (10036383 or 10039201) to the cabinet using screws (124526, 2x).
[Diagram shows hands ?️ attaching plates to the cabinet.]Step 15
Slide a component (e.g., door) into place, engaging it with the hinge parts (124518/124519, 2x).
[Diagram shows a component being slid into place, engaging with brackets.]Step 16
Attach a component (e.g., door) using hinge parts (103693, 2x).
[Diagram shows a component being attached using hinge hardware.]Step 17
Insert 6 shelf supports (10049278 or 10046940) into the desired holes inside the cabinet.
[Diagram shows hands ?️ inserting shelf supports into cabinet holes.]Step 18
Place the shelves (10116456 or 10116457) onto the installed shelf supports.
[Diagram shows a shelf being placed on supports.]Step 19
Insert a component (e.g., a shelf or divider) into the top section of the cabinet.
[Diagram shows a component being inserted from the top.]Step 20
Slide a drawer or shelf into the cabinet, ensuring it moves smoothly.
[Diagram shows a drawer/shelf being slid into the cabinet.]Step 21
Secure a component using 4 screws (10035574).
[Diagram shows hands ?️ securing a component with screws.]
