IKEA SEKTION Cabinet Assembly Instructions

Safety Warnings

WARNING! Serious or fatal crushing injuries can occur from furniture falling down. To prevent this furniture from falling down, it must be used with the wall attachment device(s) provided.

Screws(s) and plug(s) for the wall are not included. Assess the suitability of the wall to ensure that it will withstand the forces generated. Use screw(s) and plug(s) suitable for your walls and the intended load. If you are uncertain, seek professional advice. Read and follow each step of the instruction carefully.

French: ATTENTION Risque de blessure grave ou mortelle par écrasement en cas de chute du meuble. Pour éviter la chute de ce meuble, il faut le fixer au mur de façon permanente. Les fixations murales (vis et chevilles) ne sont pas incluses car leur choix dépend du matériau du mur. Vérifiez que votre mur permettra aux fixations de résister au poids du meuble. Adaptez les fixations au matériau de votre mur. En cas de doute, demandez conseil à un vendeur spécialisé. Lire et suivre attentivement toutes les étapes de la notice de montage.

Spanish: ATENCIÓN Existe un riesgo de daño grave en caso de caída del mueble. Para evitarlo, se debe fijar a la pared con los dispositivos de fijación proporcionados. Los tornillos y los tacos no se incluyen. Comprueba si la pared es lo suficientemente estable como para soportar las fuerzas generadas. Utiliza los tornillos y tacos adecuados para tu pared y la carga. Si tienes dudas, ponte en contacto con un especialista. Lee y sigue correctamente los pasos indicados en las instrucciones.

Tools Required

The following tools are recommended for assembly:

• Screwdriver (Phillips head)
• Hammer
• Clamp

Parts List

The following parts are included in the package:

• 12x Cam lock screws (112996)
• 12x Cam locks (10046940)
• 8x Dowels (113434)
• 4x Screws (10035574)
• 12x Wooden dowels (101351)
• 2x Brackets (10036383)
• 2x Brackets (10039201)
• 1x Bag of screws and wall plugs (319503)
• 2x Corner brackets (10049278)
• 2x Side panels
• 1x Top panel
• 1x Bottom panel
• 1x Back panel
• 1x Shelf support rail (30" or 36")

Assembly Steps

Step 1

Insert 12x cam lock screws (112996) into the designated holes on the side panels.

Step 2

Attach the bottom panel to the side panels using 2x cam locks (10046940) and 2x brackets (10049278).

Step 3

Insert 6x wooden dowels (101351) into the side panels.

Step 4

Secure the side panels to the bottom panel using 6x cam locks (113434).

Step 5

Slide the back panel into the grooves on the side and bottom panels.

Step 6

Attach the top panel to the side panels using 6x wooden dowels (101351).

Step 7

Secure the top panel using 6x cam locks (113434).

Step 8

Ensure the cabinet is square (90° angles). Attach the back panel using 1x screw (319503).

Step 9

Attach the shelf support rail to the inside of the cabinet using 1x screw (319503).

Step 10

Attach the shelf support rail to the inside of the cabinet using 1x screw (319503).

Step 11

Attach the remaining brackets (2x 10036383 and 2x 10039201) to the top and bottom of the cabinet using 2x screws (319503).

Step 12

Secure the top panel with 10x screws (319503).

Step 13

Attach the shelf to the shelf support rail using 2x cam locks (10046940).

Step 14

Mount the cabinet to the wall using appropriate wall attachment devices (not included). Ensure the cabinet is level and securely fastened.

Step 15

Attach the door hinges to the cabinet door and the cabinet frame using the provided screws.

Step 16

Mount the cabinet door onto the cabinet frame.

Wall Mounting

Important: Use screws and plugs suitable for your wall type. If unsure, consult a specialist. The diagram shows how to attach the cabinet to the wall using brackets and screws. Ensure all connections are secure to prevent the cabinet from falling.

Product Information

Brand: IKEA
Product Line: SEKTION
Model Number: AA-2397324-5