Important Information and Safety Warnings
WARNING: Serious or fatal crushing injuries can occur from furniture tip-over. To prevent this furniture from tipping over, it must be permanently fixed to the wall/floor.
Fixing devices for the wall/floor are not included as different wall materials require different types of fixing devices. Use fixing devices suitable for the walls/floors in your home. For advice on suitable fixing systems, contact your local specialized dealer.
Safety Recommendations:
- Place heaviest items in the lowest drawers.
- Prevent children from climbing or hanging on the drawers, doors, or shelves.
This information is provided in English, French, and Spanish. Please read carefully and keep for future reference.
Tools Required
The following tools are typically needed for assembly:
- Phillips head screwdriver
- Flathead screwdriver
- Hammer
- Clamp
Diagrams show correct handling of parts and assembly alignment. If unsure, contact IKEA for assistance. ❓
Parts List
Please verify you have all parts before beginning assembly. Part numbers and quantities are indicated:
- 112996: 12x - Dowel
- 113434: 12x - Cam lock fitting
- 10046940: 8x - Screw
- 10035574: 8x - Screw
- 101351: 12x - Dowel/Pin
- 110387: 6x - Bracket/Hanger
- 124526: 2x - Connector
- 10036383 / 10039201: 2x - Hinge/Connector component
- 10039571: 2x - Bracket
- 319503: Bag of Nails (quantity varies by step)
- 10040278: 2x - Mounting plate
- 124518 / 124519: 2x - Hinge/Connector component
- 103693: 2x - Hinge part
- 10116456 / 10116457: 1x - Shelf support/rail
Assembly Steps
Step 1: Assemble Base and Side Panels
Insert 12x dowels (112996) into the pre-drilled holes on the side panels. Attach the base panel to the side panels using 8x screws (10046940).
Step 2: Attach Bottom Support
Attach the bottom support/rail (10049278, 2x) to the side panels using 8x screws (10046940).
Step 3: Insert Dowels and Attach Back Panel Support
Insert 6x dowels/pins (101351) into the designated holes on the side panels. Attach the back panel support structure.
Step 4: Insert Cam Locks and Attach Top Panel
Insert 6x cam lock fittings (113434) into the side panels. Attach the top panel to the assembled structure.
Step 5: Insert Back Panel
Slide the main back panel (represented by a shaded area in diagrams) into the grooves on the side and bottom panels.
Step 6: Assemble Second Side Panel
Insert 6x dowels/pins (101351) into the remaining side panel. Connect this side panel to the base and top panels, forming the main cabinet frame.
Step 7: Secure Cabinet Frame
Insert 6x cam lock fittings (113434) into the second side panel. Secure the main cabinet frame by tightening the cam locks.
Step 8: Attach Back Panel (Part 1)
Position the cabinet so the back is accessible. Using a hammer, carefully nail the back panel into place with nails (319503). Ensure the cabinet is square (90° angle) before nailing. One nail is shown, but multiple are used across the edge.
Step 9: Attach Back Panel (Part 2)
Continue attaching the back panel using nails (319503). Ensure the cabinet remains square (90° angle).
Step 10: Attach Back Panel (Part 3)
Complete the back panel attachment with nails (319503). Maintain the 90° angle for structural integrity.
Step 11: Attach Mounting Plates
Attach the mounting plates (10040278, 2x) to the inside of the cabinet sides. Use screws (319503, 2x) for each plate, aligning with the specific holes indicated by part numbers 10036383/10039201.
Step 12: Reinforce Back Panel
Secure the back panels further by inserting 24x screws (319503) along the edges into the cabinet frame.
Step 13: Attach Top Brackets
Attach the top brackets (10039571, 2x) to the top of the cabinet frame.
Step 14: Attach Hinge Components (Cabinet Side)
Attach the hinge components (124526, 2x) to the cabinet frame at the designated positions.
Step 15: Attach Hinge Components (Door Side)
Attach the corresponding hinge components (124518/124519, 2x) to the door panel.
Step 16: Attach Additional Hinge Parts
Attach further hinge parts (103693, 2x) to the cabinet frame.
Step 17: Install Shelf Supports
Install 6x shelf supports/hangers (110387) into the pre-drilled holes on the inside of the cabinet at the desired height.
Step 18: Install Shelf
Place the shelf (10116456/10116457, 1x) onto the installed shelf supports. Secure it using 2x screws (10046940).
Step 19: Install Internal Components
Attach any internal components or dividers as indicated by the diagrams, using the provided hardware.
Step 20: Attach Doors
Carefully align the hinge components on the door with those on the cabinet frame and attach the doors. The diagram shows a checkmark ✔️ for correct attachment and a cross ❌ for incorrect attachment.
Step 21: Secure Cabinet to Wall
For safety, permanently fix the cabinet to the wall using appropriate wall-mounting hardware (not included). The diagram shows using 4x screws (10035574) for this purpose, likely through the previously installed mounting plates.
Final Placement and Securing
Ensure the cabinet is level using the adjustable feet. Follow the safety warning to fix the unit securely to the wall to prevent tipping. ⚠️
