VooPoo Argus G2 Pod Kit User Manual

Product Information

The VooPoo Argus G2 Pod Kit builds upon the quality of its predecessor, the Argus G, offering refined flavor delivery and comfortable use. It features a new user interface and additional engaging control elements. With five superlatives, it promises an exceptional vaping experience: Super battery capacity, super long lifespan, super adjustable power, super-fast charging, and super flavor. It is an indispensable companion for everyday vaping moments, making the top-tier Argus G2 your ideal choice.

Note: This product is not intended for liquids containing nicotine.

Product Specifications

• Dimensions: 121 x 26.4 x 15.2 mm
• Draw Type: MTL (Mouth-to-Lung) / RDL (Restricted Direct Lung)
• Switching Methods: Automatic & Manual
• Output Power: 5 - 30 W (Adjustable)
• Battery Capacity: 1000 mAh
• Output Modes: SMART / SUPER / ECO
• Chipset: GENE.AI
• Output Voltage: 3.2 - 4.2 V
• Resistance Support: 0.4 - 3.0 Ω
• Cartridge Volume (in package): 3 ml
• Cartridge Resistance (in package): 0.4Ω / 0.7Ω
• Charging: USB-C port (5V / 2A)
• Material: Zinc alloy + PC + PCTG
• Airflow Control: Yes

Getting Started

1. Remove the cartridge from the package and peel off the protective plastic film from its contact.
2. Open the side silicone plug on the cartridge body and fill the e-liquid into the filling hole. Then, re-secure the plug and attach the filled cartridge to the battery body.

Before use, wait at least ten minutes to allow the e-liquid inside the cartridge to saturate the coil properly, preventing coil burnout during the first use. ⏳

Power On: Press the fire button 5 times quickly to turn the e-cigarette on. ▶️

Main Interface & Operation

Output Mode Selection

Press the fire button 2 times quickly to enter the output mode selection menu. Use short presses of the button to navigate between lines. Confirm your selection by holding the button. You can choose between SMART, SUPER, and ECO modes. To return to the home screen, select EXIT. ⚙️

Device Settings

To access settings, press the fire button 5 times quickly. Use short presses to navigate through the menu options, and confirm your selection by holding the button. Select EXIT to return to the main screen.

• POWER OFF: Used to turn off the device. ?
• CLEAR PUFF: Used to reset the puff counter. ?
• UNLOCK/LOCK: Used to unlock or lock the device. ?
• LIGHT ON/LIGHT OFF: Used to turn the LED indicator on or off. ?

Power Adjustment

Press the fire button 3 times quickly to enter the power adjustment menu. Subsequently, adjust the power using short presses of the fire button.

Vaping

1. Bring your mouth to the mouthpiece and inhale; the heating will start automatically.
2. Alternatively, press the fire button and hold it during the inhale. Release it immediately afterward.

Charging

Connect the USB-C cable and link the e-cigarette to a power adapter. The charging status is displayed on the screen. Recommended adapter parameters are 5V / 2A. ⚡

Safety Features & Error Messages

Protections

The device includes several safety protections:

• Over-puff protection: If the fire button is accidentally pressed and held for 5 seconds, the button will automatically lock, activating protection against prolonged firing. Press the button again to unlock.
• Other protections: Low battery protection, short circuit protection, overcharge protection, over-current protection.

Display Information & Error Messages

The display shows the charging status, including the percentage of charge and the estimated time remaining until fully charged. ?

• CHECK BATTERY: Indicates the battery is too low. ⚠️
• TIME OUT: Indicates the maximum puff duration has been reached. ⏱️
• CHECK ATOMIZER: Detects a short circuit or that the cartridge is not properly connected. ❌
• LOW POWER: Indicates insufficient power for the connected cartridge. ?
• TEMP HIGH: Temperature protection is active; the device is overheating. Allow it to cool down. ?

Maintenance and Cleaning

During use, you may notice occasional condensation forming on the contacts between the cartridge and the battery. This is a normal phenomenon caused by un-vaporized vapor condensing in this area. It is recommended to clean these contacts regularly. ?

General Operating Principles

• Always use e-liquids of appropriate viscosity to prevent potential leakage or spitting.
• Keep the e-cigarette in sight while charging. ?
• Avoid dropping or impacting the e-cigarette to prevent battery damage.
• Keep the device away from water, flammable materials, and excessive heat. Do not expose the device to extreme temperatures. ?️
• Recommended storage temperature is -5 – 30°C, and operating temperature is 0 – 40°C.

Manufacturer and Importer Information

Manufacturer: VooPoo

Importer: 2Hservice s.r.o.

Address: Křivenická 444/33, Praha, Czech Republic

Website: www.mastervaper.cz

Phone: +420 734 645 645