VooPoo Argus G2 Mini Pod Kit User Manual

Introduction

Thank you for choosing an original VooPoo product. For correct and safe use of this product, please read this manual carefully. If you have any questions, contact your supplier.

Basic Product Information

The second generation VooPoo Argus G2 is presented in a smaller and more economical version with the subtitle Mini. Enter the new era of Argus pod systems and enjoy the perfect combination of perfect functionality, refined design, and utilize all the model's features without unnecessary adjustments. Thanks to the large battery capacity and modern Argus Top Fill cartridges, you can look forward to an unforgettable vaping experience.

Product Components:

• Cartridge: The removable pod containing the e-liquid and coil.
• Airflow Control: A slider or dial to adjust the tightness of the draw.
• Indicator LED: A light that shows battery status or operational feedback.
• USB-C Port: The port for charging the device.
• Filling Port: A silicone stoppered opening on the cartridge for refilling e-liquid.
• LED Indication: Refers to the main LED light's function.

Product Specifications

• Activation Methods: Automatic
• Output Power: Automatic 5 - 30W (non-adjustable)
• Battery Capacity: 1200 mAh
• Output Voltage: 3.2 - 4.2 V
• Supported Resistance: 0.4 - 3.0 Ω
• Resistance of included cartridge: 0.7 Ω
• Cartridge Volume: 3 ml
• Charging: USB-C port (5V / 1A)
• Material: Aluminum alloy + PC + PCTG
• Airflow Control: Yes
• Dimensions: 115 x 25.6 x 13.4 mm
• Puffing Method: MTL (Mouth-to-Lung)

Getting Started

Initial Setup:

1. Remove the cartridge from the packaging and peel off the protective plastic film from its contact.
2. Next, open the side silicone stopper on the cartridge body and fill the e-liquid into the filling port. Then, re-secure the stopper and attach the filled cartridge to the battery body.

Priming: Before use, wait at least five minutes for the e-liquid inside the cartridge to soak sufficiently, to prevent burning the coil during the first use.

Operation

Power On: The e-cigarette does not have a power button; it is ready for use immediately after filling and installing the e-liquid.

Vaping: To start a puff, bring your mouth to the mouthpiece and inhale; the puff will be activated automatically.

Airflow Control: To adjust the optimal draw tightness, use the lever on the back of the e-cigarette; sliding the lever opens or closes the air hole.

Turning LED Indicator On/Off: Inhale 3 times quickly within two seconds to turn the bottom LED indicator on or off.

Indicator Function: If the battery voltage drops, the indicator light will change color from white to red, and the battery will need to be recharged.

Safety and Warnings

Protection Features:

• Over-puff Protection: If an unintentional automatic puff occurs, the puff will automatically pause after five seconds to prevent damage to the cartridge.
• Short-circuit protection.
• Overcharge protection.
• Low battery protection.
• Over-current protection.
• Overheating protection.

Warnings:

• Use of this product is strictly prohibited for children and persons under 18 years of age. Use is not recommended for young people, non-smokers, pregnant or breastfeeding women, or individuals with heart conditions, hypertension, diabetes, depression, or asthma. Keep the product out of reach of children, non-smokers, and animals.
• Keep the product away from fire, water, and excessive heat. The device should be stored in a cool and shaded environment.
• Do not immerse the device in water, drop it on the ground, or throw it.
• When transporting the device, turn it off or lock it if the function is available.
• Use the device rationally according to your personal situation. If you experience discomfort during use, stop using the product immediately.
• Product Disposal: Do not dispose of the product as regular waste. The product must be recycled by returning it to an electronic waste collection point.
• Battery Disposal: Do not dispose of the product as regular waste. The product must be recycled by returning it to a battery collection point.

General Operating Principles:

• Always use an e-liquid of appropriate viscosity to prevent possible leakage or spitting of e-liquid.
• Keep the e-cigarette under supervision while charging.
• Avoid possible drops and impacts to the e-cigarette to prevent damage to the battery.
• Keep the device away from water, flammable materials, and excessive heat.
• Do not expose the device to extreme temperatures.
• Suitable storage temperature is -5 – 30°C and for use 0–40°C.

Maintenance and Cleaning

During use of the e-cigarette, you may notice occasional condensate formation on the contact between the cartridge and the battery. The formation of such condensate is caused by the unevaporated vapor accumulating between these contacts, where it then liquefies again; this is a normal phenomenon of the product.

If condensate forms, disconnect the cartridge and turn the battery body upside down, then shake it gently. Before reattaching the cartridge, remember to wipe off the condensate with a dry paper tissue.

It is recommended to clean the contacts regularly. Use a dry paper tissue or cotton swabs for cleaning.

Charging Instructions

Connect the USB-C cable and connect the e-cigarette to a power adapter. Recommended adapter parameters are 5V / 1A. It is recommended to use the original VooPoo charging cable for charging. Charge the device only indoors. For charging, use only a high-quality UL-certified USB adapter to prevent the risk of fire and explosion.

If the device is not used for a long time, it is recommended to charge it regularly to prevent battery discharge!

Notes on Cartridges

E-liquid leakage: If traveling by plane, due to high pressure, there is a risk of e-liquid leakage from the cartridge. When traveling by plane, pack cartridges separately and away from other important items, or travel only with empty cartridges.

Condensate formation: During use, condensate may form on the cartridge contact due to temperature changes from indoor to outdoor. If condensate forms, disconnect the cartridge and turn the battery body upside down, then shake it gently. Before reattaching the cartridge, remember to wipe off the condensate with a dry paper tissue.

Manufacturer Information

Manufacturer: VooPoo

Importer: 2Hservice s.r.o.

Address: Křivenická 444/33, Prague, Czech Republic

Website: www.mastervaper.cz

Phone: +420 734 645 645