Voopoo Argus P1 Pod System
User Manual
Introduction
Welcome to the Voopoo Argus P1, a compact and stylish pod system designed for a convenient vaping experience. This device combines advanced technology with a sleek aesthetic, offering performance and portability.
Package Contents
- 1 x ARGUS P1 Device
- 1 x ARGUS P1 Cartridge (2ml)
- 1 x Type-C Charging Cable ?
- 1 x User Manual
Specifications
| Feature | Specification |
|---|---|
| Output Power | 5-20W |
| Output Voltage | 3.2-4.2V |
| Resistance Range | 0.5Ω - 3.0Ω |
| Battery Capacity | 800mAh ? |
| Charging Voltage | 5V / 1A |
| Dimensions | 72mm x 46.7mm x 17.9mm |
| Material | Zinc Alloy + PCTG |
| Pod Capacity | 2ml |
| Recommended E-liquid | Nicotine ≤ 50mg |
Device Layout and Features
The Argus P1 features a user-friendly design:
- Pod Connection: Magnetic connection for easy pod insertion and removal.
- Airflow Adjustment: A slider located on the side of the device allows you to customize your draw from tight to loose. ⚙️
- Type-C Charging Port ?: Located at the bottom for convenient charging.
- LED Indicator: Provides visual feedback on battery status and charging. (Details may vary, typically shows breathing light when charging and solid when full).
Diagram Description: The device is depicted as a compact, rectangular unit with rounded edges. The top features a magnetic connection for the pod. The side has a small slider for airflow control. The bottom has a USB Type-C port.
How to Use
Filling the Pod
- Remove the Argus P1 cartridge from the device.
- Gently open the silicone stopper located on the side of the cartridge.
- Fill the pod with your preferred e-liquid. Do not overfill.
- Securely close the silicone stopper.
- Insert the filled cartridge back into the device.
- Priming: For the first use or after refilling, allow the cartridge to sit for 5-10 minutes to ensure the cotton wick is fully saturated before vaping. This prevents dry hits. ✔️
Diagram Description: An illustration shows a hand removing the pod, then opening a small silicone plug on the side of the pod. An e-liquid bottle is shown dispensing liquid into the opening. The plug is then closed, and the pod is reinserted into the device.
Charging the Device
- Connect the provided Type-C charging cable ? to the charging port at the bottom of the Argus P1 device.
- Connect the other end of the cable to a compatible USB power source (e.g., wall adapter, computer).
- The LED indicator light will illuminate to show charging status. The light typically turns off or becomes solid when fully charged. ?
Diagram Description: A visual shows the Type-C cable plugged into the bottom of the device, with an arrow indicating connection to a power source. An LED light on the device is shown illuminated.
Vaping
The Argus P1 is an auto-draw device, meaning it activates automatically when you inhale.
- Ensure the pod is filled and properly inserted.
- Adjust the airflow slider ⚙️ to your desired setting.
- Inhale gently from the mouthpiece. The device will produce vapor.
Diagram Description: A person is shown inhaling from the mouthpiece of the Argus P1 device.
Safety Information ?
- This product is intended for use by adults of legal smoking age.
- Keep out of reach of children and pets.
- Do not use if pregnant or breastfeeding.
- Consult a physician before use if you have a pre-existing medical condition, such as heart disease, asthma, or diabetes.
- Do not expose the device to extreme temperatures (hot or cold) or moisture.
- Use only the provided charging cable and a certified power adapter.
- Do not attempt to disassemble or repair the device yourself.
- Dispose of used cartridges and e-liquids responsibly according to local regulations.
Troubleshooting
No Vapor Produced
- Check if the battery ? is charged.
- Ensure the pod is correctly and securely inserted into the device. ✔️
- Verify that the e-liquid level is sufficient and the coil is properly primed.
- Make sure the airflow slider ⚙️ is not completely closed.
Leaking
- Ensure the silicone stopper on the pod is fully closed and properly seated.
- Check the pod for any visible damage.
- Avoid overfilling the pod, as this can cause leaks.
- Ensure the device and pod are kept upright when not in use.
Compliance Information
The device complies with relevant regulatory standards, including FCC and IC certifications. (Specific details like FCC ID: 2AXX2-ARGUSP1, IC: 27797-ARGUSP1 are present on the back cover).
Diagram Description: Symbols such as CE marking are visible, indicating compliance with European standards.
