ENDORFY Fortis 5 Black ARGB CPU Cooler

Product Overview

The ENDORFY Fortis 5 Black ARGB is a CPU cooler designed for efficient thermal management.

Designed by ENDORFY, manufactured by COOLING SP. Z O.O. in Poland.

Visit www.endorfy.com for more information.

Connectors

This section details the connection of the CPU cooler's cables to the motherboard.

CPU Fan Connector

Connect the CPU_FAN PWM 4-PIN cable to the CPU_FAN header on your motherboard.

ARGB Connector

Connect the ARGB 3-PIN cable to the ARGB header on your motherboard. This header typically provides +5V, Data (D), and Ground (-).

Refer to the diagrams for visual guidance on connecting the CPU fan and ARGB cables.

• Diagram 1: Shows the CPU_FAN PWM 4-PIN connector and its corresponding header.
• Diagram 2: Shows the ARGB 3-PIN connector and its corresponding header, indicating +5V, D, and - pins.
• Diagram 3: Illustrates the connection process, showing the cables being plugged into the motherboard headers.

AMD Installation

CPU Compatibility

Compatible with AMD sockets: AM5, AM4, AM3(+), AM2(+), FM2(+), FM1.

Follow these steps for installation on AMD motherboards:

1. Install the mounting bracket onto the motherboard.
2. Apply thermal paste to the CPU (diagram shows a syringe for thermal paste application).
3. Mount the CPU cooler onto the CPU and secure it with screws.
4. Connect the CPU fan cable to the CPU_FAN header.

Intel Installation

CPU Compatibility

Compatible with Intel sockets:

• LGA1200, LGA1150, LGA1151, LGA1155, LGA1156
• LGA1851, LGA1700

Follow these steps for installation on Intel motherboards:

1. Install the appropriate mounting bracket for your Intel socket type.
2. Apply thermal paste to the CPU.
3. Mount the CPU cooler onto the CPU and secure it with screws.
4. Connect the CPU fan cable to the CPU_FAN header.

Intel HEDT Installation

CPU Compatibility

Compatible with Intel HEDT sockets: LGA2066, LGA2011-3, LGA2011 (SQUARE ILM).

Follow these steps for installation on Intel HEDT motherboards:

1. Install the appropriate mounting bracket for your Intel HEDT socket type.
2. Apply thermal paste to the CPU.
3. Mount the CPU cooler onto the CPU and secure it with screws.
4. Connect the CPU fan cable to the CPU_FAN header.

Safety Instructions

1. The product should be used as intended. Incorrect use may damage the product and be dangerous to your health.
2. Make sure that the product is in good working order before using it.
3. This device is intended for indoor use, under normal humidity conditions. Do not use it outdoors.
4. Do not install and use the device within reach of children.
5. To prevent damage from condensation, allow the device to warm up to ambient temperature before use.
6. Clean only with a dry, clean cloth. Do not handle with wet hands.
7. No user-serviceable components inside. Return to authorized service center for repairs.
8. Opening the device or modifying it will void the warranty.
9. Do not use the product near liquids or in places where it may be directly exposed to liquids. If the device comes into contact with any liquids, immediately disconnect it from the power source.
10. The warranty does not cover mechanical damage to the product.
11. If the device malfunctions, disconnect from the power source immediately and contact ENDORFY technical support.
12. Do not discard electrical and electronic equipment together with other household waste.
13. The end user is responsible for correct disposal of unnecessary or faulty electrical equipment by returning it to the collection point or to the seller. Contact local authorities or the store where you purchased the product for additional information.
14. Make sure that the metal parts of the cooling system are not in contact with any expansion cards or components on the motherboard.