ENDORFY Arx 700 ARGB PC Case

Introduction

We know a lot about cases, and it's not easy to surprise us, but we still look at the ENDORFY Arx 700 ARGB case with shining eyes (and we see it every day). We've put our best knowledge and experience into this project – and it's definitely a hammer.

Ultimately, we offer our customers the largest case (486×228×472 mm) with the ENDORFY logo. The ENDORFY Arx 700 ARGB offers ample space for your components – for example, a large CPU cooler (up to 179 mm), 8 fans (4 Stratus 140 PWM ARGB pre-installed), and practically any current graphics card (up to 410 mm). The case keeps your components at a pleasant temperature, making them feel like they're on a spring meadow – thanks to the panels with mesh inserts (front and top). One day, we'll install such panels in our own homes.

Cooling Performance

We have news that will make you freeze. The Arx 700 ARGB case is as cold inside as the heart of your guild buddy who won't lend you gold for new armor. Simply put – your components will maintain a low temperature even when you push your PC to the last drop.

All this is made possible by the spacious interior of the Arx 700 ARGB with space for 8 cooling fans. Furthermore, the front and top sides of the case function as filters (thanks to the mesh inserts), so you don't need additional dust protection. Compared to cases with extra filters, this single layer also improves airflow and makes it easier to keep components in a pleasant airflow (because cooling is extremely important to us).

Your mom will be proud of such tidiness (ours already are).

Integrated ARGB Fans

Sometimes we say the Arx 700 ARGB is a guy with a heart of stone fans. And not just any fans – we've included 4 Stratus 140 PWM ARGB fans in the case, developed in collaboration with Synergy Cooling. We've also mounted a splitter, allowing you to control their speed via a PWM signal from a motherboard connection.

The Stratus 140 PWM ARGB is our colorful everything. Its 14 cm width, combined with the optional semi-passive mode, is perfect for ensuring exceptional airflow within the case. Additionally, the fan runs on a robust FDB bearing, so you can rely on quiet and smooth operation even under extreme conditions. Some even say it could handle a survival camp, but we haven't tested that feature. Not yet.

Optimized Airflow and Dust Protection

Exceptional products don't need (thick) filters – especially when it comes to cases. The double anti-dust layer protects against dirt, but simultaneously restricts airflow like a synthetic fiber costume at a cosplayer event. Just thinking about it makes us hot!

That's why the filtering function in the Arx 700 ARGB – attention, drumroll… – is handled by the top and front panels with mesh inserts. They keep the inside of the case as airy as a spring meadow, and you don't need to install additional dust protection. Furthermore, each mesh insert can be removed and cleaned with a cloth or vacuum cleaner (or simply rinsed under running water) – which takes less time than reading this description.

Aesthetic Appeal

1000 Extra Points for Looks. We respect closed cases – they fit minimalist desks, and their components are elegantly stored. But if you want to show off cool components (or turn on internal ARGB), a tempered glass side panel is exactly what you need. And it gives the case 1000 extra points – which is precisely why we equipped the Arx 700 ARGB with such glass.

Spacious Design

Everything Has Its Place. If we had to describe the Arx 700 ARGB in a few words, we'd say everything has its place. This is our largest case (at least for now), where you can easily pack all your treasures. In such a space, they'll feel like they're in an open window. Or two – YOLO.

This is enough to assemble everything you need for winning at life – including a large CPU cooler (up to 179 mm), 8 fans (you get 4 from us initially), and simultaneously two radiators up to 360 mm, providing demanding systems with sufficient cooling. Practically all current graphics cards (up to 410 mm) and power supplies also fit – you can easily mount the PSU in the most convenient position for you, thanks in part to the special mounting frame. Already tested.

Radiant Lighting Control

Radiant Future with Lighting. We have good news. With our case, a radiant future with lighting awaits you. In the truest sense of the word – with the Arx 700 ARGB, a single click is enough (the included RESET button on the I/O panel is responsible for control) to create a beautiful aurora over your desk. Some say it's due to the low temperature inside the case – but in reality, it's the ARGB fans spinning inside.

With them, you can illuminate your PC however you wish. 4 Stratus 140 PWM ARGB fans (which we've pre-installed in the case for you) give you the ability to configure the lighting just the way you want it. Thanks to the built-in PWM and ARGB controllers, you can set them up with ease – all components form a functioning unit that is compatible with ARGB-marked ENDORFY products (and ARGB products from other manufacturers). In practice, this means you can easily synchronize the lighting of your entire setup based on the Arx 700 ARGB – even if it's your very first build. Because the devices should be there for you, not the other way around.

Key Features

• Pre-installed Stratus 140 PWM ARGB Fans
• Maximum Airflow in the Case
• Top and Front made of Airy Mesh
• Space for two radiators up to 360 mm
• Spaciousness

Technical Specifications

General

• Product Name: ENDORFY Arx 700 ARGB
• Product Code: EY2A013
• EAN: 5903018666327
• Product Type: PC Case
• Color: Black
• Motherboard Form Factors: ATX, microATX, ITX
• Dimensions (H×W×D): 486×228×472 mm
• Max Expansion Card Length: 410 mm
• Max CPU Cooler Height: 179 mm
• Max PSU Length: 340 mm
• PCI Slots: 7

Drive Bays

• Internal:
• 1x 2.5"/3.5"
• 6x 2.5"

Cooling

• Fans (max.): 8
• Fans (pre-installed): 4
• Front: 3x Stratus 140 PWM ARGB Fans (200-1200 RPM)
• Rear: 1x Stratus 140 PWM ARGB Fan (200-1200 RPM)

Radiator Compatibility

• Front: 1x 120, 240, 280, 360 mm
• Top: 1x 120, 240, 280, 360 mm
• Rear: 1x 120, 140 mm

Dust Filters

• Front
• Top
• Bottom

I/O Panel

• 1x USB-C
• 2x USB-A
• 1x Headphone (3.5mm Jack)
• 1x Microphone (3.5mm Jack)
• 1x POWER
• 1x RESET/LED

Logistics Data

• Retail Packaging Dimensions: 522×543×295 mm
• Weight (Net): 8.5 kg
• Weight (Gross): 9.7 kg

Package Contents

• 1x ENDORFY Arx 700 ARGB Case
• 4x Stratus 140 PWM ARGB Fans
• 1x Mounting Kit
• 1x Manual

Warranty

36 Months